Lifting & Rigging — Saudi Arabia

Lifting & Rigging Supplier Saudi Arabia — Chain Hoists, Slings & Hardware

Gulf Union Ozone Trading Co. stocks a comprehensive range of lifting and rigging equipment for oil & gas, petrochemical, construction, and industrial projects across Saudi Arabia. Our inventory covers electric and manual chain hoists, wire rope slings, flat web slings, polyester round slings, alloy shackles, hooks, Grade 80 and Grade 100 chain, spreader beams, plate clamps, snatch blocks, and rigging accessories — all to ASME B30, EN 818, EN 1492, EN 13889, DIN, and ISO standards. ISO 9001:2015 certified (CR 4030570569). Full documentation supplied. Same-day dispatch from our Jeddah warehouse.

Submit RFQ
Lifting and rigging equipment — chain hoists, shackles and wire rope slings in Saudi Arabia — Gulf Union Ozone
Lifting & Rigging Categories

Product Types in Stock

All lifting and rigging equipment is supplied to internationally recognised standards — ASME B30 series, EN 818, EN 1492, EN 13889, DIN, BS, and ISO — with full material traceability documentation and test certificates.

Type 01

Chain Hoists & Lever Blocks

Electric chain hoists to FEM 1Am and FEM 2m classifications per ISO 4301/1, covering 0.5T–20T capacity. ATEX Zone 1 explosion-proof variants for hazardous areas (gas group IIB, T3). Manual chain blocks to ASME B30.21 / EN ISO 16649, hand-chain operated with load-limiting slip clutch, 0.25T–20T. Lever hoists (come-alongs) to ASME B30.21 / EN 13157, ratchet mechanism, 0.75T–9T, for tensioning, pulling, and positioning in confined spaces. All hoists supplied with overload protection devices and test certificates.

Type 02

Wire Rope & Synthetic Slings

Wire rope slings in 6x19 IWRC and 6x37 IWRC construction to ASME B30.9 / EN 13414-1, galvanized IPS/EIPS wire rope, single-leg through four-leg assemblies, 8mm–64mm diameter. Polyester flat web slings Type 5 (eye-to-eye) and Type 6 (endless loop) to EN 1492-1 / ASME B30.9, widths 25mm–300mm, WLL 1T–20T. Polyester round slings to EN 1492-2, WLL 1T–200T. UHMWPE (Dyneema) round slings to EN 1492-2, lightweight with high chemical resistance for critical offshore and refinery lifts. Colour-coded by capacity per EN and ASME conventions.

Type 03

Shackles, Hooks & Swivels

Forged shackles to EN 13889 / ASME B30.26: screw-pin anchor (bow) and chain (D-type) shackles, 0.33T–150T WLL; bolt-type safety shackles for permanent rigging. Stainless steel AISI 316 shackles for marine and corrosive service. Eye hooks, clevis hooks, and grab hooks to ASME B30.10 / EN 1677-1, with integral safety latch, Grade 8 alloy steel, 0.5T–100T WLL. 360° swivel hoist rings to ASME B30.26, M12–M100. Jaw-to-jaw swivels and jaw-to-eye swivels to EN 1677-4, WLL 0.5T–25T, preventing sling twist during rotation.

Type 04

Alloy Chain & Rigging Links

Grade 80 short-link chain to EN 818-2 / ASME A391, 6mm–32mm, proof-load tested, WLL 1.12T–16T/leg. Grade 100 short-link chain to EN 818-4, Ql100 heat-treated alloy steel, 6mm–32mm, WLL 1.4T–20T/leg. Endless Grade 80 chain slings to EN 818-6. Master links (oblong and pear-shaped) to EN 1677-2, WLL 1T–80T. Delta master link assemblies for three- and four-leg chain slings. Coupling and connecting links to EN 818-2 / EN 1677-4, Grade 8 alloy steel. Turnbuckles jaw & jaw, eye & eye, hook & hook to DIN 1480 / ASME B30.26. Wire rope clips to ASME B30.26 / DIN 741 and thimbles to DIN 6899.

Type 05

Lifting Beams & Below-Hook Devices

Fixed and adjustable spreader beams to ASME B30.20 / BS 2853, structural S355JR steel, spans 0.5m–12m, WLL 1T–100T — eliminating horizontal compressive forces on slings. Lifting beams with multiple pick-point attachment eyes. C-hooks for steel coil and paper roll handling, ASME B30.20, coil ID 400mm–1200mm, WLL 3T–40T. Vertical and horizontal plate clamps to ASME B30.20 / DIN EN 13157, heat-treated alloy steel, plate thickness 0–60mm, WLL 0.5T–20T. Drum lifting clamps for 200L (55-gallon) steel and polyethylene drums. Pipe hooks and bundle hooks for cylindrical loads.

Type 06

Trolleys, Blocks & Load Cells

Push (plain) trolleys and geared hand-chain trolleys to FEM 1.001 / ASME B30.17, adjustable flange width 50mm–300mm, WLL 0.5T–20T — for traversing hoists along monorail I-beams and H-beams. Beam clamps / girder clamps to DIN EN 13157 / ASME B30.20, forged alloy steel, flange width 50mm–500mm, WLL 1T–20T. Fixed and swivel snatch blocks to ASME B30.26, single and double sheave, wire rope 8mm–42mm, WLL 1T–50T. Shackle-type compression load cells to OIML R60 / BS EN 45501, stainless steel 17-4 PH, range 0.5T–500T. Load pins and loadlink tension cells to ISO 376, range 1T–300T.

Product Catalog

Complete Lifting & Rigging Range — 55+ Products

All items supplied with Certificates of Conformance (CoC), EN 10204 3.1 MTCs where applicable, proof-load and dimensional inspection reports. ISO 9001:2015 QMS (CR 4030570569).

Product Standard / Spec Material Size / Capacity Range Application
Electric Chain Hoist — Standard Duty FEM 1Am / ASME B30.16 / ISO 4301 Alloy steel chain, cast iron housing 0.5T – 20T, 3m – 30m lift Workshops, warehouses, assembly lines, maintenance bays
Electric Chain Hoist — Explosion-Proof (ATEX) FEM 2m / ATEX Zone 1 / IECEx / EN 60079 Alloy steel chain, Ex-rated motor enclosure 0.5T – 10T Oil & gas facilities, refineries, petrochemical plants — hazardous areas (IIB T3)
Manual Chain Block / Chain Hoist ASME B30.21 / EN ISO 16649 / EN 13157 Drop-forged alloy steel hooks; Grade 80 load chain 0.25T – 20T Field maintenance, construction hoisting, no-power overhead lifting
Lever Hoist / Lever Block (Come-Along) ASME B30.21 / EN 13157 / EN ISO 3999 Alloy steel body; Grade 80 chain 0.75T – 9T Tensioning, pulling, positioning in confined spaces and remote sites
Electric Wire Rope Hoist FEM 1Am–3m / ASME B30.16 / ISO 4301 Galvanized 6×19 IWRC wire rope; alloy steel drum 1T – 50T, up to 100m lift Heavy-lift overhead crane end-trucks, gantry crane systems
Hand Pulley Block (Chain Block with Spur Gear) ASME B30.16 / EN 13157 Drop-forged alloy steel; Grade 80 chain 0.25T – 50T Workshop overhead lifting, maintenance pits, rigging lofts
Wire Rope Sling — Single-Leg (6×19 IWRC) ASME B30.9 / EN 13414-1 / EIPS Galvanized EIPS/IPS wire rope, ferrule or spelter socket termination Dia 8mm–64mm; WLL 0.63T–119T General crane rigging, single-point vertical lifts, industrial maintenance
Wire Rope Sling — Two-Leg Bridle (6×37 IWRC) ASME B30.9 / EN 13414-1 Galvanized EIPS 6×37 IWRC; master link and hooks Dia 10mm–52mm; WLL 1T–140T (60° angle) Two-point balanced lifts — pressure vessels, beams, machinery
Wire Rope Sling — Four-Leg (7×19 IWRC) ASME B30.9 / EN 13414-2 Galvanized 7×19 IWRC; forged master ring Dia 8mm–48mm; WLL 0.5T–200T assembly Four-point lifts — modules, tanks, structural assemblies, offshore skids
Endless (Grommet) Wire Rope Sling ASME B30.9 / EN 13414-1 6×19 or 6×37 IWRC galvanized wire rope, swaged sleeve Dia 12mm–50mm; WLL 1T–40T Choker and basket hitches on pipes, cylinders, and bundled loads
Polyester Flat Web Sling — Type 5 (Eye-to-Eye) EN 1492-1 / ASME B30.9 High-tenacity polyester woven webbing Width 25mm–300mm; WLL 1T–20T; lengths 1m–10m Sensitive surface loads — painted, polished, or delicate equipment
Polyester Flat Web Sling — Type 6 (Endless Loop) EN 1492-1 / ASME B30.9 High-tenacity polyester Width 25mm–300mm; WLL 1T–20T Choker, vertical, and basket hitches; cylindrical loads, pipes, coils
Polyester Round Sling (Soft Sling) EN 1492-2 / ASME B30.9 Polyester multifilament core, polyester tubular cover WLL 1T – 200T (vertical); colour-coded per EN Heavy and delicate lifts — refinery vessels, turbine components, nuclear plant
UHMWPE / Dyneema Round Sling EN 1492-2 / BS EN 1492-2 UHMWPE (ultra-high molecular weight polyethylene) core, polyester jacket WLL 1T – 100T Lightweight critical offshore rigging; chemical-resistant; strength-to-weight ×10 steel
Nylon (Polyamide) Web Sling — Type 5 EN 1492-1 / ASME B30.9 Polyamide 6 (nylon) high-tenacity woven webbing Width 25mm–200mm; WLL 1T–15T Alkaline-resistant lifting; concrete precast, stone, glass panels
Four-Leg Chain Sling Assembly — Grade 80 EN 818-4 / EN 1677 / ASME B30.9 Grade 80 alloy chain; forged master ring and hooks 7mm–32mm chain; WLL 1.18T–40T/assembly (60° angle) Lifting heavy plant and machinery, engine blocks, steel fabrications
Screw Pin Anchor Shackle (Bow Shackle) — Galvanized EN 13889 / ASME B30.26 / BS 3032 Forged carbon steel Grade 6, hot-dip galvanized 0.33T – 150T WLL Connecting slings to lifting points; general rigging terminals
Screw Pin Chain Shackle (D-Shackle) — Galvanized EN 13889 / ASME B30.26 Forged carbon steel, hot-dip galvanized 0.33T – 120T WLL Chain link connection, in-line rigging assembly, sling terminations
Safety Bolt-Type Anchor Shackle (Bolt, Nut & Cotter) EN 13889 / ASME B30.26 / Green Pin G-4163 Alloy steel, hot-dip galvanized; stainless cotter pin 1T – 150T WLL Permanent and semi-permanent rigging, critical lifts, offshore mooring
Wide-Mouth Safety Bow Shackle (Sling Shackle) EN 13889 / Green Pin G-5063 Grade 6 forged steel, galvanized 1T – 85T WLL Multi-leg sling assemblies where extra width is needed to seat multiple sling eyes
Stainless Steel Anchor Shackle AISI 316 ASME B30.26 / EN 13889 AISI 316L forged stainless steel 0.33T – 12T WLL Marine, offshore, coastal, chemical, and food-industry rigging
360° Swivel Hoist Ring (Pivot Ring Eye Bolt) ASME B30.26 / DIN 580 / Crosby S-278 Grade 10 alloy steel, zinc-plated M12 – M100; WLL 1T – 50T Machinery lifting attachment points; multi-directional and angular lifts
Shoulder Pivot Eye Bolt (Metric) ASME B18.15 / DIN 580 / ISO 3266 Grade 8 alloy steel, self-coloured or galvanized M8 – M64; WLL 0.16T – 16T (vertical) Machine and equipment attachment points for vertical and angled lifts
Eye Nut (Lifting Nut) DIN 582 / ASME B18.15 Forged alloy steel, galvanized or self-colour M8 – M64; WLL 0.16T – 16T Lifting attachment on threaded studs and rods; tie-down anchorage
Forged Eye Bolt — Plain Shank (DIN 580) DIN 580 / BS 4278 Carbon steel grade 5.6, self-colour or galvanized M8 – M48; WLL 0.1T – 6T (vertical) General purpose lifting attachment; light-duty rigging and tie-down
Jaw & Jaw Turnbuckle — Open Body DIN 1480 / ASME B30.26 / EN 13411 Forged carbon steel, hot-dip galvanized M10 – M64; WLL 0.5T – 30T Tensioning wire rope, guy wires, structural bracing, antenna stays
Eye & Eye Turnbuckle — Open Body DIN 1480 / BS 4429 Forged carbon steel, hot-dip galvanized M10 – M64; WLL 0.5T – 30T Bracing structural cables, tensioning rigging lines, pipeline supports
Hook & Hook Turnbuckle — Open Body DIN 1480 Forged steel, galvanized M8 – M52; WLL 0.3T – 20T Quick-connect rigging, guy-wire tensioning, erection bracing
Rigging Screw / Bottle Screw — Eye & Fork DIN 1478 / BS 4429 Forged steel, hot-dip galvanized M10 – M100; WLL 0.5T – 50T Structural bracing, offshore mooring, marine rigging tensioning
Grade 80 Alloy Short-Link Chain EN 818-2 / ASME A391 Gr. 80 / ISO 3077 Heat-treated alloy steel, minimum 800 N/mm² yield; self-coloured or galvanized 6mm – 32mm; WLL 1.12T – 16T/leg Chain hoists, chain slings, load binding, securing cargo
Grade 100 Alloy Short-Link Chain (High-Strength) EN 818-4 / ASME A391 Gr. 100 Ql100 heat-treated alloy steel, 1000 N/mm² minimum yield 6mm – 32mm; WLL 1.4T – 20T/leg High-capacity chain slings, lashing heavy plant, critical load applications
Endless Chain Sling — Grade 80 (Single Loop) EN 818-6 / ASME B30.9 Grade 80 alloy chain; joined with quality connecting link 6mm – 32mm; WLL 0.56T – 16T (basket × 2) Choker and basket hitch for loads without lifting eyes; pipe bundles
Master Link — Oblong (Grade 8) EN 1677-2 / BS EN 1677-2 Alloy steel Grade 8, quenched and tempered WLL 1T – 63T Top ring for multi-leg chain and wire rope sling assemblies
Delta (Triangular) Master Link Assembly — Grade 10 EN 1677-2 / Grade 10 compliant Grade 10 alloy steel, yellow chromate finish WLL 1T – 80T Three- and four-leg sling top hook attachment; overhead crane hook seat
Pear-Shaped Link — Grade 8 EN 1677-2 Alloy steel Grade 8, quenched and tempered WLL 3T – 50T Connecting master ring to multi-leg assemblies; pendant chain sling links
Coupling Link — Grade 80 EN 818-2 / EN 1677-4 Alloy steel Grade 8 7mm – 26mm; WLL 1.12T – 8T Connecting chain sling components, extending chain sling lengths
Clevis Grab Hook — Grade 80 (Shortening Clutch) EN 1677-4 / ASME B30.26 Grade 80 alloy steel, quenched and tempered 7mm – 22mm chain; WLL 1.12T – 10T Chain shortening without removing from assembly; grab single chain links
Safety Hook with Integral Safety Latch — Grade 8 ASME B30.10 / EN 1677-1 Grade 8 alloy steel, quenched and tempered WLL 0.5T – 25T Sling eye connection to crane hook; prevents accidental disengagement
Self-Locking Swivel Hook (360° Rotation) ASME B30.10 / EN 1677-1 Alloy steel Grade 8 with swivel bearing WLL 1T – 20T Rotating loads, crane hook terminal, prevents sling twist under load
Jaw-to-Eye Swivel (Rigging Swivel) EN 1677-4 / BS EN 1677 Grade 8 alloy steel, stainless or galvanized WLL 0.5T – 25T Preventing sling rotation and twist in dynamic rigging configurations
Wire Rope Clip / Bulldog Clip — Forged ASME B30.26 / DIN 741 / EN 13411-5 Drop-forged steel, hot-dip galvanized; stainless steel option Wire rope dia 6mm – 64mm Field-formed wire rope eyes; guy wire and cable terminations
Wire Rope Thimble — Heavy Duty ASME B30.9 / DIN 6899 B / EN 13411-1 Galvanized steel; stainless steel AISI 316 option Wire rope dia 6mm – 64mm Protecting wire rope at eye terminations; shackle and hook connections
Aluminium Ferrule / Swage Sleeve DIN 3093 / EN 13411-3 / ASME B30.9 Aluminium alloy 6061 / copper ferrule option Wire rope dia 6mm – 32mm Mechanically swaged eye terminations for sling manufacture
Fixed Eye Snatch Block — Single Sheave ASME B30.26 / DIN 15058 Galvanized steel shell; bronze or polymer sheave bushing Wire rope 8mm–40mm; SWL 1T–30T Redirecting wire rope pull; mechanical advantage rigging systems
Swivel Jaw Snatch Block — Double Sheave ASME B30.26 Forged steel with stainless steel sheave shaft; polymer bushings Wire rope 10mm–42mm; SWL 1T–50T Compound tackle systems, wire rope deflection, winch rigging
Beam Clamp / Girder Clamp (Forged) DIN EN 13157 / ASME B30.20 / BS 2853 Forged alloy steel, zinc-plated; hardened gripping pads Flange 50mm–500mm; WLL 1T–20T Lifting attachment to structural I-beams and H-beams without drilling
Push Trolley (Plain Trolley) for Monorail Beam FEM 1.001 / ASME B30.17 / DIN 15012 Forged steel side plates; polyamide or hardened steel wheels Beam flange 50mm–300mm (adjustable); WLL 0.5T–20T Manual traversal of hoists and chain blocks along I-beam flanges
Geared Hand-Chain Trolley for I-Beam FEM 1.001 / ASME B30.17 Steel frame; hardened steel travelling wheels; alloy chain drive Beam flange 50mm–300mm; WLL 0.5T–20T Precision load positioning on monorail systems; production line movements
Vertical Plate Clamp (Erection Clamp) ASME B30.20 / DIN EN 13157 Heat-treated alloy steel; cam-action gripping jaw Plate thickness 0–50mm; WLL 0.5T–20T Handling and erecting steel plates, flat bar, and structural profiles vertically
Horizontal Plate Clamp (Parrot-Beak Clamp) ASME B30.20 / DIN EN 13157 Alloy steel, heat-treated; serrated jaw inserts Plate thickness 0–40mm; WLL 1T–10T Transporting steel plate in horizontal plane; stockyard and workshop handling
Fixed-Length Spreader Beam ASME B30.20 / BS 2853 Structural steel S355JR; forged end fittings Span 0.5m – 8m; WLL 1T – 100T Eliminating compressive sling forces on long or fragile loads
Adjustable Telescopic Spreader Beam ASME B30.20 / BS 2853 Structural S355 steel, alloy steel locking pins Span 0.3m – 12m; WLL 1T – 100T Variable-width spreader for different load dimensions across multiple lifts
Lifting Beam — Multi-Point Pick (Custom) ASME B30.20 / EN 13155 / DNV-GL Guidelines Structural S355JR / S460 steel; alloy eye fittings Span 1m – 10m; WLL 2T – 80T Simultaneous multi-point lifts; balanced distribution of load over long structures
C-Hook for Steel Coil / Paper Roll Lifting ASME B30.20 Alloy steel, painted; replaceable wear pads Coil ID 400mm–1200mm; WLL 3T–40T Handling steel coils, paper rolls, and hollow-bore annular loads without slings
Drum Lifting Clamp — Vertical (200 L / 55 gal) ASME B30.20 Heat-treated alloy steel; rubber-lined grips 200 L (55-gal) drums; WLL 0.5T – 2T Safe drum handling in chemical plants, warehouses, and offshore
Pipe / Bundle Hook (Sling Hook for Tubulars) ASME B30.20 / ASME B30.10 Forged alloy steel, powder-coated OD 100mm–800mm; WLL 1T–20T Lifting pipes, drill collars, cylinder bundles in oil & gas and construction
Shackle-Type Compression Load Cell OIML R60 / BS EN 45501 / MID 2014/32/EU Stainless steel 17-4 PH (precipitation hardened) 0.5T – 500T; accuracy class C3 Crane scale weighing, load monitoring, proof-load testing
Loadlink Tension Load Cell (Load Pin) BS EN 45501 / ISO 376 / OIML R60 Stainless steel or alloy steel, IP67 sealed 1T – 300T; accuracy ±0.1% In-line load monitoring in crane hooks, test rigs, and structural tension measurements
Alloy Steel Connecting Link — Grade 80 EN 818-2 / ASME A391 Grade 80 Grade 80 alloy steel, threaded closure, galvanized 6mm – 26mm; WLL 1.12T – 8T Closing endless chain slings, connecting chain components in sling assemblies
Sling Identification Tag / Capacity Label Set EN 1492-1 / EN 1492-2 / ASME B30.9 Woven polyester label / durable plastic tag All sling widths and capacities Safe working load identification, inspection date recording, sling traceability
Technical Specifications

Material Grades & Standards Reference

Gulf Union Ozone supplies lifting and rigging equipment meeting the following material and design standards. Full certificates and documentation packages accompany every shipment.

Chain & Chain Slings

Grade / Standard Min. Tensile Strength Safety Factor
Grade 80 — EN 818-2 / ASME A391 800 N/mm² 4:1 (WLL)
Grade 100 — EN 818-4 / ASME A391 1000 N/mm² 4:1 (WLL)
Proof load — EN 818-2 2× WLL tested —
Break load — EN 818-2 4× WLL minimum —

Shackle Working Load Limits

Pin Dia. Anchor (Bow) WLL Chain (D) WLL
13mm 2T 2T
19mm 4.75T 4.75T
25mm 8.5T 6.5T
38mm 17T 12T

Synthetic Sling Colour Code (EN 1492)

Colour WLL (Vertical) Basket (60°)
Violet 1T 1.73T
Green 2T 3.46T
Yellow 3T 5.2T
Grey 4T 6.93T
Red 5T 8.66T
Brown 8T 13.86T
Blue 10T 17.32T

Standards Compliance Summary

Standard Scope
ASME B30.9 Wire rope, chain, web and round slings
ASME B30.10 Hooks — design, marking, care and use
ASME B30.20 Below-the-hook lifting devices
ASME B30.21 Manual lever and chain hoists
ASME B30.26 Rigging hardware — shackles, turnbuckles, swivels
EN 818-2 / EN 818-4 Short-link chain Gr. 80 / Gr. 100
EN 1492-1 / EN 1492-2 Flat web slings / round slings
EN 13889 / EN 1677 Forged shackles / sling components
Why Gulf Union Ozone

Why Industrial Buyers in Saudi Arabia Choose Gulf Union Ozone

⚡

Local Stock — Same-Day Dispatch

Safety stock of lifting and rigging equipment maintained in our Jeddah warehouse. In-stock items dispatched same day for orders received before 2 pm. No lead time waiting for overseas shipments — items are available now.

📄

Documentation Ready to Ship

Every lifting and rigging shipment includes EN 10204 3.1 Material Test Certificates, Certificates of Conformance, proof-load test certificates, dimensional inspection reports, and packing lists with heat and lot numbers. 100% mill-traceable documentation.

🏅

ISO 9001:2015 Documented Quality

Gulf Union Ozone operates an ISO 9001:2015 certified Quality Management System (CR 4030570569). Every lifting and rigging product received into stock undergoes MTC verification and dimensional spot checks before dispatch.

🗺

Nationwide KSA Delivery

We deliver lifting and rigging equipment to Al Jubail, Yanbu, Ras Tanura, Riyadh, Dammam, Al Khobar, Abha, Tabuk, and all 18 administrative regions of Saudi Arabia. Regular consolidation runs to major industrial cities.

Related Products

Also Available from Gulf Union Ozone

Industrial Valves

Valves — Ball, Gate, Butterfly & Check

ASME B16.5 flanged and butt-weld valves in carbon steel and stainless steel. API 6D, API 607 fire-safe designs. Full pressure testing and MTCs.
Pipe Fittings

Butt-Weld & Socket-Weld Pipe Fittings

Elbows, tees, reducers, caps in ASTM A234 WPB carbon steel and ASTM A403 stainless steel. ASME B16.9, B16.11, MSS SP-75. MTCs and CoCs supplied.
Flanges

Forged Steel Flanges — ASME B16.5

Weld neck, slip-on, blind, socket weld and threaded flanges in ASTM A105, A182 F316L and F304L. Class 150–2500. EN 10204 3.1 MTCs.
Our Capabilities

Sourcing, QC & Documentation Services

Custom sourcing of industrial materials not held in stock. Third-party inspection coordination, document package compilation, and expediting services for projects across Saudi Arabia.
Get a Quote

Request a Lifting & Rigging Quotation

Send us your lifting and rigging requirements — product name, standard or spec, working load limit (WLL), quantity, and delivery location in Saudi Arabia. We will confirm stock availability and return a quotation with full documentation details, typically within 4 business hours.

Email: info@gulfunionozone.com Submit RFQ Form

CR 4030570569 | ISO 9001:2015 | Jeddah, Saudi Arabia

Inventory updated: August 2026

In Summary

Gulf Union Ozone Trading Co. supplies Lifting & Rigging Equipment to industrial customers across Saudi Arabia with delivery from our Jeddah warehouse — all products ship with original certificates and compliance documentation for Aramco, SABIC, and government projects.

In Summary

Lifting & Rigging Equipment from Gulf Union Ozone serves Saudi Aramco operations, SABIC, SADARA, SEC utilities, NEOM mega-projects, and major industrial facilities across the Kingdom — our inventory covers the most common specifications, grades, and sizes.

In Summary

Gulf Union Ozone stocks a comprehensive range of Lifting & Rigging Equipment across various specifications and capacities — contact us for immediate availability confirmation and a competitive quotation with full documentation.

In Summary

For urgent Lifting & Rigging Equipment procurement in Saudi Arabia, WhatsApp +966 55 098 8062 — our team confirms stock availability within the hour and provides competitive quotations with full compliance documentation for all industrial sectors.