What descaling chemicals are approved for boiler and heat exchanger cleaning in Saudi Arabia?

Approved descaling chemicals for boiler and heat exchanger cleaning in Saudi Arabia industrial facilities typically fall into three categories based on deposit type and equipment metallurgy. For calcium carbonate and lime scale deposits in HVAC chillers, cooling towers, and domestic water heaters, citric acid-based descalers (food-grade or technical grade, 5%–15% dilution) are the safest and most widely accepted option — they are non-corrosive to mild steel, copper, and brass at recommended concentrations, and are approved for use in closed-loop HVAC water systems in Saudi Arabia. For harder calcium sulphate and silicate scale in steam boilers and high-temperature process heat exchangers, inhibited hydrochloric acid (HCl 5%–15% with corrosion inhibitor package) is the standard descaling agent — it must be applied with neutralisation and passivation steps following Saudi Aramco SAEP-1171 or equivalent procedures. EDTA-based chelating descalers (10%–15% disodium EDTA solution, pH 4.5–7.0) are used for delicate equipment such as plate heat exchangers in titanium or stainless steel where acid attack risk must be minimised. Phosphoric acid rust-converters (10%–20% H₃PO₄) convert iron oxide to iron phosphate and are used as a combined rust removal and pre-treatment step before protective coating. Gulf Union Ozone supplies all descaling chemical types from our Jeddah warehouse with full GHS Safety Data Sheets and application guidelines in Arabic and English. Contact us for your specific deposit type and equipment metallurgy recommendation.

How do VCI corrosion inhibitors work for long-term equipment storage in KSA?

VCI (Volatile Corrosion Inhibitor) products work by releasing amine-based organic molecules that vapourise at ambient temperature and deposit as a monomolecular protective layer on metal surfaces within a sealed enclosure. This layer displaces moisture and forms a barrier against oxygen and chloride attack — the two primary corrosion drivers in Saudi Arabia's humid coastal and dusty inland environments. For long-term equipment storage in KSA (shutdowns, mothballed plant, imported spares awaiting installation), the standard VCI approach is: (1) Clean and dry the metal surface to remove existing contamination. (2) Apply VCI emitter bags or foam inserts inside sealed packaging or equipment enclosures — one emitter bag typically protects 0.03–0.06 m³ of void space. (3) Wrap individual components in VCI film (20–40 micron polyethylene impregnated with VCI compound) or VCI-impregnated paper for flat surfaces. (4) Seal the package or enclosure with tape to maintain VCI vapour concentration. VCI protection is typically effective for 12–36 months depending on seal quality and emitter size. Gulf Union Ozone stocks VCI bags, rolls, film, paper, and foam in our Jeddah warehouse. For large equipment (vessels, heat exchangers, rotating equipment), we supply nitrogen blanketing system chemicals and desiccant packs as supplementary measures. Contact us with your equipment list and storage duration for a VCI product recommendation.

What GHS and SDS documentation is required for industrial chemicals supplied to Saudi Arabia projects?

Saudi Arabia follows the GHS (Globally Harmonized System of Classification and Labelling of Chemicals) requirements under SASO standards for industrial chemical documentation. For industrial chemicals supplied to Saudi Arabia projects — particularly Saudi Aramco, SABIC, NEOM, and Aramco contractor sites — the following documentation is required: (1) Safety Data Sheet (SDS) in both Arabic and English, structured to GHS 16-section format (OSHA HazCom 2012 / EU REACH regulation format accepted), covering hazard identification, composition, first-aid, fire-fighting, handling and storage, exposure controls, physical and chemical properties, stability and reactivity, toxicological information, ecological information, disposal, transport, regulatory, and other information. (2) GHS-compliant product label on every container with pictograms, signal word, hazard statements, and precautionary statements in Arabic. (3) For REACH-regulated substances imported to Saudi Arabia via EU origin, the REACH registration number and substance information is required by customs. (4) For certain hazardous chemicals (acids, oxidisers, solvents), SASO customs clearance requires a Material Safety Certificate and MSDS pre-declaration. Gulf Union Ozone provides current GHS-compliant SDS documents in Arabic and English with every chemical order. Contact us at info@gulfunionozone.com for pre-shipment documentation review for your project.

Industrial Chemicals Saudi Arabia

Industrial Chemicals Categories

Product Types in Stock

Gulf Union Ozone carries six core categories of industrial maintenance and process chemicals for Saudi Arabia oil & gas, petrochemical, manufacturing, and infrastructure facilities. All products supplied with GHS-compliant Safety Data Sheets in Arabic and English, REACH declarations where applicable, and SASO import documentation.

Type 01

Degreasers & Cleaners

Aqueous alkaline degreasers (pH 11–13) for spray and immersion parts washing of metal components — removes cutting oils, hydraulic fluid, grease, and carbon deposits without solvent exposure risk. Biodegradable citrus-based degreasers for general maintenance cleaning and parts degreasing where environmental disposal requirements are strict. Solvent degreasers (IPA, naphtha, and acetone-based) for electrical equipment, precision parts, and electronic component cleaning. Parts washer fluid concentrate for recirculating parts washers in workshops and fabrication facilities. Ultrasonic cleaning concentrate for precision degreasing in ultrasonic bath cleaning equipment. Brake and wheel cleaner aerosol spray for fast evaporating surface degreasing. Electrical contact cleaner aerosol for moisture displacement and insulation resistance restoration on electrical panels, terminal blocks, and switchgear. Available in 1L, 5L, 20L, 200L drum, and IBC formats for all facility sizes.

Type 02

Rust Removers & Descalers

Phosphoric acid-based rust converters that chemically convert iron oxide (rust) to stable iron phosphate — applied by brush, spray, or immersion on rusted carbon steel surfaces before painting or protective coating. Citric acid descalers (food-safe, 5%–15% concentration) for lime and calcium carbonate scale removal from heat exchangers, boilers, cooling tower pipework, and HVAC systems without risk of equipment damage. Inhibited hydrochloric acid (HCl 5%–15% with benzimidazole corrosion inhibitor) for aggressive scale removal on industrial heat exchangers and process pipework in Saudi Arabia — supplied with neutraliser and passivation chemicals. EDTA-based chelating descalers (disodium EDTA solution, pH 4.5–7.0) for delicate plate heat exchangers in titanium and stainless steel where acid descalers risk metallurgical damage. Electrolytic rust removal solution for workshop electrolytic rust removal on small parts and tools.

Type 03

Corrosion Inhibitors & Passivators

VCI (Volatile Corrosion Inhibitor) emitter bags, VCI film (20–40 micron impregnated polyethylene), VCI paper, and VCI foam for long-term equipment and spare-parts storage protection — effective for 12–36 months in sealed packaging in Saudi Arabia's coastal and desert environments. Amine film-forming corrosion inhibitors for cooling water system dosing — prevents pitting and general corrosion on mild steel, copper, and galvanised pipework. Nitrite-free organic corrosion inhibitors for closed cooling loops in environmentally sensitive applications. Passivation chemicals — citric acid passivation solution (5%–10%) and nitric acid passivation (as per ASTM A967) for stainless steel SS 304 and SS 316 weld zones after fabrication to restore chromium oxide passive layer. Boiler feedwater chemical treatment packs (oxygen scavenger, alkalinity booster, scale and corrosion inhibitor blend) for fire-tube and water-tube boilers in Saudi Arabia process plants and hospitals.

Type 04

pH Adjusters & Water Treatment Chemicals

Caustic soda (NaOH) flakes (99% purity) and 50% solution for pH elevation, soap manufacture, and chemical process application. Sulphuric acid (H₂SO₄) 98% industrial grade for pH reduction, pickling, and battery electrolyte. Hydrochloric acid (HCl) 33% technical grade for pH adjustment, metal pickling, and descaling. Soda ash (Na₂CO₃) dense and light for water softening, pH buffering, and glass manufacture. Slaked lime (Ca(OH)₂) hydrated for pH correction in wastewater treatment and lime dosing systems. Anti-scalant and threshold inhibitor for reverse osmosis (RO) membrane systems — prevents calcium carbonate, calcium sulphate, silica, and barium scale deposition. Non-oxidising biocides (isothiazolinone and DBNPA types) and oxidising biocides (sodium hypochlorite, chlorine dioxide generator chemicals) for cooling tower and process water microbiological control and Legionella prevention in Saudi Arabia facilities.

Type 05

Specialty Maintenance Chemicals

Anaerobic thread-locking compound (Loctite 243 / 270 equivalent) — medium and high strength grades for locking metric fasteners against vibration loosening in rotating and process equipment. Copper-based and nickel-based anti-seize paste for high-temperature bolt assemblies on flanges, exhaust systems, and furnace components to 1200°C — prevents galling and seizure on stainless steel and carbon steel fasteners. RTV silicone gasket maker (red and grey) for sealing engine covers, gearboxes, and flange faces where conventional gaskets are not used. Multi-purpose penetrating oil and corrosion inhibitor spray (WD-40 equivalent) for freeing seized fasteners, moisture displacement, and light lubrication. Heavy-duty chain and cable lubricant spray for conveyor chains, drive chains, and cable sheaves in dusty KSA construction and industrial environments. Electrical insulation varnish (IEC Class F) for rewound electric motor coil impregnation. Flux and solder paste for copper pipe brazing and electronic soldering operations.

Type 06

Coating Removers & Surface Prep

NMP-based (N-methyl-2-pyrrolidone) paint stripper gel for removing epoxy, polyurethane, and aged alkyd coatings from steel structures without mechanical blasting — applied by brush, left 4–24 hours, stripped with plastic scrapers. Alkaline paint stripper (sodium hydroxide-based) for thick multi-layer coating systems on large steel structures. Rust preventive oil (Tectyl 506 equivalent) — thin-film wax and oil-based temporary corrosion protection for machined parts, bare steel flanges, and carbon steel equipment in storage — applicable by dip, brush, or spray, effective 12–24 months indoors. Temporary protective wax coating for external surface protection during sea shipment and outdoor storage in Saudi Arabia's UV and salt-laden coastal environments. Pickling paste (HNO₃ + HF acid gel, inox grade) for weld oxidation removal, heat discolouration, and scale removal on stainless steel SS 304 and SS 316 weld zones — per ASTM A380 / EN ISO 15730. Electrode cleaning and passivation spray for restoring passivity on stainless steel welds after grinding.

Product Catalog

Complete Industrial Chemicals Range — 25+ Products

All chemical products supplied with current GHS Safety Data Sheets in Arabic and English, REACH compliance declarations, and GHS-labelled containers. ISO 9001:2015 QMS (CR 4030570569). Representative stock lines — contact us for specific concentrations, custom formulations, and bulk pack sizes.

Product	Active Ingredient	Dilution / Use Rate	Pack Size	Application
Aqueous Alkaline Degreaser — Industrial	Potassium hydroxide, surfactant blend	5–10% dilution in water	5L / 20L / 200L	Parts washing, spray degreasing of machined components and fabricated steel
Biodegradable Citrus Degreaser	D-limonene, non-ionic surfactants	Undiluted or 10:1 with water	5L / 20L	General maintenance cleaning, floor and equipment degreasing, safe disposal
Solvent Degreaser — IPA (Isopropyl Alcohol) 99.9%	Isopropyl alcohol 99.9%	Undiluted (ready to use)	1L / 5L / 20L	Precision parts cleaning, PCB cleaning, optics, and electronic components
Electrical Contact Cleaner Aerosol	HFC/HFE propellant, fast-evaporating solvent	Ready-to-use aerosol spray	400ml aerosol	Switchgear, relays, terminal blocks, and motor control panel cleaning
Parts Washer Fluid Concentrate	Alkaline surfactant, corrosion inhibitor	3–5% in water; refill as needed	20L / 200L	Workshop recirculating parts washer tanks for machined and stamped components
Phosphoric Acid Rust Converter	Phosphoric acid 20–25% + surfactant	Ready to use; brush or roller apply	1L / 5L / 20L	Convert surface rust to stable iron phosphate before painting on steel structures
Citric Acid Descaler — Industrial Grade	Citric acid 50%+ (liquid concentrate)	5–15% dilution in water	5L / 20L / 200L	Heat exchanger, boiler, and cooling system lime scale and carbonate removal
Inhibited Hydrochloric Acid Descaler — 15%	HCl 15% + benzimidazole inhibitor	Ready to use or further dilute	20L / 200L	Industrial heat exchanger descaling; scale removal from carbon steel pipework
EDTA Chelating Descaler Solution	Disodium EDTA 10–15%, pH 4.5–7.0	Ready to use; circulate 4–8 hours	5L / 20L	Plate heat exchanger descaling in SS and titanium — no metallurgical damage
VCI Emitter Bags — 12-Month Protection	Amine-based VCI compound	1 bag per 0.03–0.06 m³ void	Packs of 10 / 50 / 100	Long-term spare-parts and equipment storage protection in sealed packaging
VCI Film — 30 Micron (500mm wide roll)	VCI-impregnated polyethylene film	Wrap and seal; no direct contact needed	500mm × 100m rolls	Component wrapping for shipment and storage of steel parts and assemblies
VCI Paper — Multi-Metal Grade	Amine VCI impregnated kraft paper	Interleave between components	500mm × 100m rolls	Multi-metal protection: steel, aluminium, copper, and brass in one packaging
Stainless Steel Passivation Solution — Citric Acid	Citric acid 5–10% solution	Immerse or wipe; 30–60 min contact	5L / 20L	SS 304/316 weld zone passivation per ASTM A967 Method C after fabrication
Boiler Feedwater Treatment Pack	Sodium sulphite O₂ scavenger + phosphonate	Dose per boiler capacity (supplier guidelines)	5L / 20L / 200L	Oxygen scavenging, scale prevention, and corrosion control in steam boilers
Caustic Soda (NaOH) Flakes — 99%	Sodium hydroxide 99% min	Dissolve in water as required	25kg bags / 1000kg super-sacks	pH elevation, chemical process, effluent treatment, and soap manufacture
Sulphuric Acid (H₂SO₄) — 98% Industrial	Sulphuric acid 98%	Dilute as required (always add acid to water)	35kg carboy / 200L drum	pH reduction, battery electrolyte, metal pickling, and chemical synthesis
Hydrochloric Acid (HCl) — 33% Technical	Hydrochloric acid 33%	Dilute as required per application	35kg carboy / 200L drum	pH reduction, metal pickling, and chemical process applications in KSA industry
RO Anti-Scalant Concentrate	Phosphonate / polyacrylate blend	2–5 ppm dosing in RO feed water	5L / 20L / 200L	RO membrane scale prevention — CaCO₃, CaSO₄, SiO₂, and BaSO₄ inhibition
Non-Oxidising Biocide — Cooling Tower	DBNPA 20% active (dibromonitrilopropionamide)	5–20 ppm shock dose; 1–2 ppm continuous	5L / 20L	Microbiological control and Legionella prevention in cooling towers
Thread-Locking Compound — Medium Strength (Loctite 243 equiv)	Anaerobic dimethacrylate ester	Apply to thread; hand-torque to assembly	10ml / 50ml / 250ml	Locking metric fasteners M6–M20 against vibration in process equipment
Copper-Based Anti-Seize Paste	Copper powder in grease carrier	Apply thin coat to thread; torque to spec	250g / 500g / 1kg tins	High-temperature bolt assemblies on flanges and exhaust systems to 1100°C
RTV Silicone Gasket Maker — Grey (High Temp)	One-part silicone RTV; cures on moisture	Apply bead; cure 24 hours before service	85g / 310ml cartridge	Sealing flanges, gearbox covers, and formed-in-place gaskets to 260°C
Penetrating Oil & Moisture Displacer Spray	Petroleum distillate, corrosion inhibitor	Ready-to-use aerosol spray	400ml aerosol / 5L bulk	Freeing seized fasteners, moisture displacement, and light lubrication
Pickling Paste — Stainless Steel (HNO₃/HF Gel)	Nitric acid + hydrofluoric acid gel	Apply gel; leave 15–30 min; neutralise and rinse	1kg / 5kg / 20kg	SS weld oxidation, heat discolouration removal, and pre-passivation surface prep
NMP-Based Paint Stripper Gel	N-methyl-2-pyrrolidone (NMP) 60–80%	Apply 1–3mm film; wait 4–24 hours; scrape	5L / 20L	Removing epoxy and polyurethane coatings from steel structures without blast
Rust Preventive Oil (Tectyl 506 equiv)	Petroleum wax in solvent carrier	Apply by dip, brush, or spray; air-dry	5L / 20L / 200L	Temporary corrosion protection for machined parts, flanges, and equipment in storage

Industrial Chemicals & Degreasers Supplier Saudi Arabia — Cleaning, Treatment & Maintenance Chemicals In Stock

Product Types in Stock

Degreasers & Cleaners

Rust Removers & Descalers

Corrosion Inhibitors & Passivators

pH Adjusters & Water Treatment Chemicals

Specialty Maintenance Chemicals

Coating Removers & Surface Prep

Complete Industrial Chemicals Range — 25+ Products

Why Industrial Buyers in Saudi Arabia Choose Gulf Union Ozone for Industrial Chemicals

Local Stock — Same-Day Dispatch

GHS/SDS Documentation Ready

ISO 9001:2015 Certified Quality

Nationwide KSA Delivery

Also Stocked at Gulf Union Ozone

Industrial Filters

Water Treatment Equipment

Welding & Fabrication Supplies

Site Safety PPE

Request an Industrial Chemicals Quotation