| Safety Helmet — Industrial (ABS Shell) |
EN 397 / ANSI Z89.1 Type I Class E |
ABS shell, 6-point polyamide suspension |
Head circ. 51–62 cm, ratchet adjust |
Construction, oil & gas, petrochemical sites — KSA mandatory PPE |
| Safety Helmet — HDPE Low-Profile Vented |
EN 397 / EN 50365 (electrical insulation) |
HDPE shell, 4-point webbing suspension |
Head circ. 52–64 cm |
Electrical work and general industry where ventilation is required |
| Bump Cap (Industry Cap) |
EN 812 Class II |
ABS insert, polyester outer |
S/M/L/XL |
Low-headroom areas, maintenance pits, vehicle workshops |
| Safety Spectacles — Anti-Scratch / Anti-Fog |
EN 166 1BT / ANSI Z87.1 |
Polycarbonate lens, nylon frame |
Universal fit, clear and tinted lenses |
General site eye protection against dust, chips, and UV |
| Safety Goggles — Chemical Splash / Impact |
EN 166 3B / EN 170 / ANSI Z87.1 |
Polycarbonate indirect-vent housing |
One-size-fits-most, anti-fog coating |
Chemical handling, liquid sprays, fine dust in process plant |
| Face Shield — Full-Length Polycarbonate |
EN 166 / EN 170 / EN 172 |
1mm polycarbonate visor, adjustable browguard |
200mm × 400mm visor; fits helmet |
Grinding, chipping, chemical decanting, milling operations |
| Hi-Vis Vest — Class 2 |
EN ISO 20471 Class 2 |
Fluorescent yellow 100% polyester, retroreflective tape |
S to 3XL |
Construction sites, plant maintenance, general industrial use |
| Hi-Vis Vest — Class 3 (Long Sleeve) |
EN ISO 20471 Class 3 |
Fluorescent orange polyester with 50mm retroreflective bands |
S to 4XL |
Road works, utility sites, night shift, high-traffic areas |
| Disposable Coverall — Type 5/6 (Tyvek) |
EN 13982-1 Type 5 / EN 13034 Type 6 |
Dupont Tyvek 500 spunbonded polyethylene |
S to 3XL; packaged individually |
Asbestos, catalyst, insulation dust; limited chemical splash |
| FR Hi-Vis Coverall — Combined Protection |
EN ISO 11612 A1B1C1 + EN ISO 20471 Class 2 |
FR modacrylic/cotton blend, 280 g/m² |
S to 3XL |
Oil & gas platforms, refinery, petrochemical plant arc-flash risk |
| Safety Boot — S3 HRO (Leather Lace-Up) |
EN ISO 20345 S3 HRO SRC |
Full-grain leather upper, steel toecap, steel midsole, heat-resistant outsole |
UK 5–13 / EU 38–48 |
Construction, oil & gas, petrochemical — hot surface and penetration risk |
| Safety Boot — S1P (Composite Toecap) |
EN ISO 20345 S1P ESD SRC |
Leather upper, composite toecap, anti-static, anti-penetration |
UK 5–13 / EU 38–48 |
Electronics assembly, ESD-sensitive areas, general industry |
| Chemical-Resistant Boot — PVC Waterproof |
EN ISO 20345 S4 / EN ISO 13832 |
PVC upper and outsole; steel toecap liner |
EU 38–47 |
Chemical plant, water treatment, cleaning operations, food processing |
| Cut-Resistant Gloves — HPPE Level D |
EN 388:2016 4X43D (ISO 13997) |
HPPE/glass fibre liner, polyurethane palm coating |
S / M / L / XL / XXL |
Sheet metal handling, pipework, fabrication, blade work |
| Heat-Resistant Gloves — Aluminised |
EN 407 4X3441 / EN 388 |
Aluminised fibreglass back, split leather palm |
One-size / L / XL |
Furnace, foundry, hot-process handling up to 500°C radiant heat |
| Chemical-Resistant Nitrile Gloves |
EN 374-1 / EN 374-2 / EN 374-4 |
Nitrile rubber 0.12mm, fully textured |
XS–XXL; box of 100 |
Chemical handling, laboratory, cleaning agents, oils and hydrocarbons |
| Leather Rigger Gloves |
EN 388 3143 / AS/NZS 2161.3 |
Chrome-tanned split cowhide, cotton back |
S / M / L / XL |
General construction, rigging, scaffolding, rough-material handling |
| Full-Body Safety Harness — EN 361 |
EN 361 / EN 363 / ANSI Z359.1 |
25mm polyester webbing, forged steel D-rings |
S / M / L / XL / XXL |
Work-at-height — scaffolding, roof, tower, elevated platforms |
| Full-Body Harness — Multi-Purpose with Positioning Belt |
EN 361 + EN 358 + EN 363 |
45mm waist belt, 25mm leg/shoulder webbing, forged steel |
Universal S–XL adjustable |
Pole climbing, tower maintenance, confined-space entry with front attachment |
| Energy-Absorbing Lanyard — Single Leg 1.8m |
EN 354 / EN 355 / EN 362 |
25mm polyester webbing, energy pack, snap hook 23kN |
1.8m extended; 60kN break load |
Fall arrest — single attachment point on horizontal lifelines |
| Twin-Leg (Y) Energy-Absorbing Lanyard — 100% Tie-Off |
EN 354 / EN 355 / EN 362 |
25mm polyester webbing, dual energy-absorbing packs |
2× 1m legs from central stem |
100% tie-off compliance — mandatory on Aramco, SABIC, NEOM sites |
| Retractable Fall Arrester (SRL) — Stainless Wire |
EN 360 / EN 363 / ANSI Z359.14 |
SS 316 wire rope, swivelling snap hook, ABS housing |
3m / 6m / 10m / 20m / 30m options |
Vertical descent work, crane maintenance, tank top access |
| Ear Defenders (Earmuffs) — Over-Head |
EN 352-1 / ANSI S3.19 |
ABS cups, foam-filled cushions, steel headband |
SNR 28 dB / 32 dB / 37 dB options |
Compressor stations, turbine halls, fabrication shops, noisy plant |
| Helmet-Mounted Ear Defenders |
EN 352-3 |
ABS cups, fold-flat arm, universal EN 397 helmet attachment |
SNR 26–31 dB |
Combined head and hearing protection — drilling, piling, chipping |
| Disposable Ear Plugs — Pre-Shaped Foam |
EN 352-2; SNR 38 dB |
Polyurethane foam, uncorded |
Pairs per box: 200 / 500 |
High-noise short-duration tasks; disposable site issue |
| FFP2 Dust Respirator — Valved |
EN 149:2001+A1:2009 FFP2 NR D |
Moulded fibreglass/polypropylene, exhalation valve |
Box of 25; one-size-fits-most |
Construction dust, catalyst fines, insulation fibres — KSA demolition sites |
| Half-Face Respirator with A1B1E1P3 Cartridges |
EN 140 / EN 14387 A1B1E1P3 |
Silicone face seal, twin bayonet cartridge ports |
S / M / L; cartridges sold separately |
Chemical vapour, H₂S, ammonia, acid gas, particulate in process plant |
| Safety Sign Kit — ISO 7010 Mandatory + Prohibition |
ISO 7010 / BS EN ISO 7010 |
1mm rigid PVC or aluminium, photoluminescent option |
200×200mm / 300×300mm / 400×400mm |
Site entry, mandatory PPE, hazard demarcation — KSA construction |
| First-Aid Kit — HSE Compliant (50-Person) |
BS 8599-1 / OSHA 29 CFR 1910.151 |
Rigid ABS wall-mount box, full contents |
50-person site kit |
Industrial sites, site offices, fabrication yards — KSA regulatory compliance |
