HDPE Pipes & Fittings — Saudi Arabia

HDPE Pipes & Fittings Supplier Saudi Arabia — PE100 & PE80, DN 20–1200 mm

Gulf Union Ozone Trading Co. supplies high-density polyethylene pipes and fittings from our Jeddah warehouse across Saudi Arabia. Our HDPE range covers PE100 and PE80 grades in SDR 7.4 to SDR 26, sizes DN 20 to 1200 mm, for potable water, gas distribution, industrial process, sewerage, and irrigation systems. Certified under ISO 9001:2015 (CR 4030570569) with full documentation including EN 10204 3.1 MTCs on request.

Submit RFQ
HDPE PE100 pipes and electrofusion fittings stocked at Gulf Union Ozone Jeddah warehouse, Saudi Arabia
What We Supply

Product Types in Stock

Comprehensive HDPE piping system components for water, gas, industrial and drainage applications.

Type 01

HDPE Pressure Pipes

PE100 and PE80 straight and coiled pipes in SDR 7.4 (PN 25) through SDR 26 (PN 6.3), sizes DN 20 to 1200 mm. Black with blue or yellow co-extruded stripes for water and gas service. Manufactured to ISO 4427-2, EN 12201-2, ASTM D3035, and ASTM F714. Available in 6 m and 12 m straight lengths and coils for smaller diameters.

Type 02

Butt Fusion Fittings

Full range of HDPE butt fusion fittings — 90° elbows (long and short radius), 45° elbows, 22.5° elbows, equal tees, reducing tees, concentric and eccentric reducers, crosses, stub end flanges, weld neck flanges, and end caps. DN 63 to 1200 mm, matching SDR of pipe system. To ISO 8085-3, EN 12201-3, and ASTM D3261.

Type 03

Electrofusion Fittings

Electrofusion couplers, 45° and 90° elbows, equal and reducing tees, saddle outlets, reducers, end caps, repair saddles, and ball valves. DN 20 to 630 mm per ISO 11413, ASTM F1055, and EN 12201-3. Each fitting carries embedded resistance wire and barcode for EF controller compatibility. Ideal for field repair and tie-in work.

Type 04

Compression & Mechanical Fittings

Compression fittings (couplers, elbows, tees, reducers, end caps, threaded adaptors) for DN 20–110 mm in SDR 11 and SDR 17, rated to 16 bar. Mechanical joint adaptors, flange adaptors with backing rings, HDPE-to-DI/steel/PVC transition couplings, and saddle repair clamps per ISO 14236 and EN 12201-3.

Type 05

Non-Pressure & Drainage Pipes

HDPE double-wall corrugated sewer pipe (SN4, SN8, SN16), solid wall gravity sewer pipe, slotted drainage pipe, spiral wound duct pipe for cable protection, and dredge float pipe. Sizes DN 100–1200 mm to ISO 21138-1, EN 13476, and ASTM F667. Socketed and plain-ended forms available.

Type 06

Specialty & Lined Pipe Systems

Abrasion-resistant mining and slurry pipes, HDPE-lined steel pipe for chemical service, multilayer PE-RT/HDPE barrier pipe, irrigation lateral pipe for drip systems, ESD-safe electro-conductive pipe for explosive environments, and HDPE oxygen barrier pipe for hydronic systems. Technical datasheets supplied.

Product Catalog

Complete HDPE Pipes & Fittings Range — 50+ Products

All items held in Jeddah stock. Sizes and pressure ratings subject to availability — contact us for current lead times on non-stock items.

Product Standard / Spec Material Size Range Application
HDPE PE100 Pressure Pipe — SDR 11 (PN 16) ISO 4427-2, EN 12201-2, ASTM D3035 PE100, black + blue stripes DN 20–1200 mm Potable water mains, irrigation
HDPE PE100 Pressure Pipe — SDR 17 (PN 10) ISO 4427-2, EN 12201-2, ASTM F714 PE100, black + blue stripes DN 63–1200 mm Water distribution, raw water transfer
HDPE PE100 Pressure Pipe — SDR 9 (PN 20) ISO 4427-2, EN 12201-2 PE100, black DN 20–630 mm High-pressure industrial and water systems
HDPE PE100 Pressure Pipe — SDR 7.4 (PN 25) ISO 4427-2, EN 12201-2 PE100, black DN 20–400 mm Very high-pressure pumping mains
HDPE PE100 Pressure Pipe — SDR 13.6 (PN 12.5) ISO 4427-2, EN 12201-2, ASTM D3035 PE100, black + blue stripes DN 32–630 mm Water supply, industrial process
HDPE PE100 Pressure Pipe — SDR 21 (PN 8) ISO 4427-2, EN 12201-2 PE100, black DN 75–1200 mm Low-pressure water mains, gravity systems
HDPE PE100 Pressure Pipe — SDR 26 (PN 6.3) ISO 4427-2, EN 12201-2 PE100, black DN 110–1200 mm Large diameter gravity and low-pressure mains
HDPE PE80 Pressure Pipe — SDR 11 (PN 12.5) ISO 4427-2, EN 12201-2, ASTM D3035 PE80, black + blue stripes DN 20–630 mm Potable water, industrial distribution
HDPE PE100 Yellow Gas Pipe — SDR 11 (MOP 4 bar) ISO 4437-2, EN 1555-2, ASTM D2513 PE100, yellow / black + yellow stripes DN 20–630 mm Natural gas and LPG distribution networks
HDPE PE100 Coiled Pipe — SDR 11 ISO 4427-2, EN 12201-2 PE100, black + blue stripes DN 20–110 mm, 50–200 m coils House connections, irrigation laterals
HDPE PE100 Coiled Pipe — SDR 17 ISO 4427-2, EN 12201-2 PE100, black + blue stripes DN 20–110 mm, 50–200 m coils Water service connections, drip irrigation
HDPE Butt Fusion 90° Elbow — Long Radius, SDR 11 ISO 8085-3, EN 12201-3, ASTM D3261 PE100, black DN 63–630 mm Direction changes in pressure mains
HDPE Butt Fusion 90° Elbow — Long Radius, SDR 17 ISO 8085-3, EN 12201-3, ASTM D3261 PE100, black DN 63–1200 mm Water transmission, low-pressure distribution
HDPE Butt Fusion 45° Elbow — SDR 11 ISO 8085-3, EN 12201-3, ASTM D3261 PE100, black DN 63–630 mm Gradual direction change, water and gas pipe routing
HDPE Butt Fusion 22.5° Elbow — SDR 11 ISO 8085-3, EN 12201-3 PE100, black DN 63–400 mm Trenchless pipe alignment corrections
HDPE Butt Fusion Equal Tee — SDR 11 ISO 8085-3, EN 12201-3, ASTM D3261 PE100, black DN 63–630 mm Branch connections in water mains
HDPE Butt Fusion Equal Tee — SDR 17 ISO 8085-3, EN 12201-3, ASTM D3261 PE100, black DN 63–1200 mm Branch connections in transmission mains
HDPE Butt Fusion Reducing Tee — SDR 11 ISO 8085-3, EN 12201-3, ASTM D3261 PE100, black DN 63–630 mm Reduced branch off water and gas mains
HDPE Butt Fusion Concentric Reducer — SDR 11 ISO 8085-3, EN 12201-3, ASTM D3261 PE100, black DN 63–630 mm (various reduction ratios) Pipe diameter transitions, horizontal runs
HDPE Butt Fusion Eccentric Reducer — SDR 11 ISO 8085-3, EN 12201-3 PE100, black DN 63–630 mm Pump connections, air pocket avoidance
HDPE Butt Fusion Cross (4-Way) — SDR 11 ISO 8085-3, EN 12201-3 PE100, black DN 63–315 mm Grid distribution networks, water mains crossing
HDPE Butt Fusion Stub End (Flange Adapter) — SDR 11 ISO 8085-3, EN 12201-3, ASME B16.21 PE100, black DN 63–630 mm HDPE-to-flanged valve and equipment connections
HDPE Butt Fusion End Cap — SDR 11 ISO 8085-3, EN 12201-3, ASTM D3261 PE100, black DN 63–630 mm Pipeline terminations, dead-end closures
HDPE Butt Fusion End Cap — SDR 17 ISO 8085-3, EN 12201-3 PE100, black DN 63–1200 mm Transmission main terminations
HDPE Wye (Y) Branch Fitting — SDR 11 ISO 8085-3, EN 12201-3 PE100, black DN 63–315 mm Low-resistance branch connections, irrigation headers
HDPE Electrofusion (EF) Coupler — SDR 11 ISO 11413, EN 12201-3, ASTM F1055 PE100, black DN 20–630 mm Pipe joining, field tie-ins, leak repair
HDPE Electrofusion 90° Elbow — SDR 11 ISO 11413, EN 12201-3, ASTM F1055 PE100, black DN 20–250 mm Direction changes in confined spaces
HDPE Electrofusion 45° Elbow — SDR 11 ISO 11413, EN 12201-3 PE100, black DN 20–250 mm Angled connections in tight trenches
HDPE Electrofusion Equal Tee — SDR 11 ISO 11413, EN 12201-3, ASTM F1055 PE100, black DN 20–400 mm Branch connections in water and gas mains
HDPE Electrofusion Reducing Tee — SDR 11 ISO 11413, EN 12201-3 PE100, black DN 20–400 mm Reduced service branches from distribution mains
HDPE Electrofusion Reducer (Coupler Reducer) ISO 11413, EN 12201-3, ASTM F1055 PE100, black DN 25–315 mm Diameter change in field without butt fusion equipment
HDPE Electrofusion Saddle Outlet — SDR 11 ISO 11413, EN 12201-3 PE100, black Main DN 90–630 mm / Outlet DN 20–160 mm Live-tap service connections on existing mains
HDPE Electrofusion Repair Saddle Clamp ISO 11413, WIS 4-32-08 PE100 body + stainless steel clamp DN 63–630 mm Emergency pinhole and split repair on live pipes
HDPE Electrofusion End Cap — SDR 11 ISO 11413, EN 12201-3, ASTM F1055 PE100, black DN 20–250 mm Pipeline dead-end termination in confined areas
HDPE Electrofusion Ball Valve — SDR 11 ISO 11413, EN 12201-5, ASTM F1770 PE100 body, HDPE ball DN 20–110 mm Inline isolation on water and gas service lines
HDPE Compression Coupling — SDR 11 ISO 14236, EN 12201-3, BS EN 1254-3 PA/PP body, stainless steel insert DN 20–110 mm Tool-free PE pipe joints, service connections
HDPE Compression 90° Elbow — SDR 11 ISO 14236, EN 12201-3 PA/PP body, stainless steel insert DN 20–63 mm Direction changes in meter connections and service pipes
HDPE Compression Equal Tee — SDR 11 ISO 14236, EN 12201-3 PA/PP body, stainless steel insert DN 20–63 mm Service branch connections, meter boxes
HDPE Compression Reducing Tee — SDR 11 ISO 14236, EN 12201-3 PA/PP body, stainless steel insert DN 20–63 mm Reduced branch from small diameter service line
HDPE Compression End Cap — SDR 11 ISO 14236, EN 12201-3 PP, stainless steel insert DN 20–63 mm Temporary or permanent service pipe closures
HDPE Compression Male Threaded Adaptor — SDR 11 ISO 14236, EN 12201-3, ISO 7/1 PP body, brass insert, EPDM seal DN 20–63 mm × ½″–2″ BSP Meter connections, tap-offs to threaded fittings
HDPE Compression Female Threaded Adaptor — SDR 11 ISO 14236, EN 12201-3, ISO 7/1 PP body, brass insert, EPDM seal DN 20–63 mm × ½″–2″ BSP House service connections to threaded valves
HDPE Stub Flange with GRP Backing Ring — SDR 11 ISO 8085-3, EN 12201-3, PN 10/16 PE100 stub / GRP backing ring DN 63–630 mm HDPE-to-flanged valve, pump, and equipment interface
HDPE Stub Flange with SS316 Backing Ring — SDR 11 ISO 8085-3, EN 12201-3, ASME B16.5 PN 10/16 PE100 stub / SS316 backing ring DN 63–630 mm Corrosive environments, offshore, chemical service
HDPE-to-Steel Transition Coupling (Mechanical) WIS 4-32-19, EN 14525, AWWA C219 Ductile iron body, EPDM gaskets, SS316 bolts DN 63–630 mm HDPE-to-DI, steel, or PVC pipe connections
HDPE Mechanical Joint (MJ) Adaptor — SDR 11 AWWA C111, ASTM A536, ISO 2531 PE100 spigot / ductile iron MJ gland DN 63–630 mm Connection to ductile iron valves and fittings
HDPE Saddle Branch Clamp — Stainless Steel WIS 4-32-08, EN 12201-3 SS304 band, EPDM seal Main DN 63–630 mm / Branch DN 20–110 mm Service tie-in without fusion equipment, live tapping
HDPE Gasket-Sealed Coupling (Slip-On) EN 14525, ASTM F1924 PE100 body, EPDM gasket DN 63–400 mm Quick repair coupling, no heat fusion required
HDPE Double-Wall Corrugated Sewer Pipe — SN8 ISO 21138-1, EN 13476-3, ASTM F2648 HDPE, black corrugated outer / smooth inner DN 100–1200 mm Gravity sewers, stormwater drainage, culverts
HDPE Double-Wall Corrugated Sewer Pipe — SN16 ISO 21138-1, EN 13476-3 HDPE, black corrugated outer / smooth inner DN 100–600 mm Deep burial sewers, heavy traffic loading
HDPE Solid Wall Gravity Sewer Pipe (Series 1) EN 12666-1, ISO 11922-1, ASTM F714 HDPE, black DN 110–630 mm Foul and surface water gravity sewers
HDPE Perforated (Slotted) Drainage Pipe ISO 21138-2, EN 13476, ASTM F405 HDPE, black DN 100–630 mm Sub-surface drainage, landfill leachate collection
HDPE Spiral Wound Duct Pipe (Cable Protection) IEC 61386-24, EN 14125, ASTM F2160 HDPE, black or coloured DN 63–200 mm Power cable, fibre optic, and communication duct
HDPE Dredge Float Pipe ISO 4427-2, ASTM F714, custom spec HDPE PE100, orange (UV-stabilised) DN 200–1000 mm Marine dredging, slurry and tailings transport
HDPE Mining / Slurry Abrasion-Resistant Pipe ISO 4427-2, AS/NZS 4130, SDR 9–11 PE100 RC (Resistance to Crack), black DN 63–630 mm Mine slurry, tailings, aggregate-laden flow
HDPE PE100 RC Trenchless Pipe (HDD/Pipe Bursting) ISO 4427-2, IGEM/TD/3, PAS 55 RC classification PE100 RC, SDR 11–17, black DN 63–630 mm Horizontal directional drilling, pipe bursting, slip lining
HDPE Irrigation Lateral Pipe — SDR 13.6 ISO 4427-2, ISO 9261, EN 12201-2 PE100, black + blue stripes DN 20–110 mm, 100–200 m coils Drip, micro-jet, and sprinkler irrigation systems
HDPE Electro-Conductive (ESD) Pipe — SDR 11 ATEX Directive 2014/34/EU, EN 13463, IEC 60079 Conductive HDPE, surface resistance <10⁶ Ω DN 25–315 mm Fuel and solvent transfer in ATEX zones
HDPE Multilayer Barrier Pipe (PA/HDPE) DVGW GW 335-B4, EN 12201-2, ISO 4437 HDPE outer, PA6 barrier layer, HDPE inner DN 20–160 mm, SDR 11 Gas distribution in contaminated ground, hydrocarbon barrier
HDPE Butt Fusion Weld Neck Flange — SDR 11 ISO 8085-3, EN 12201-3, ASME B16.5 PN 10/16 PE100, black DN 63–630 mm High-integrity flange connections to pumps and valves
HDPE Long Spigot (Plain End) for Welding ISO 8085-3, EN 12201-3 PE100, black DN 63–630 mm Fitting fabrication, custom spool welding
HDPE Flanged Spool Piece (Isometric Prefab) ISO 8085-3, EN 12201, project isometrics PE100, black; GRP or SS flanges DN 63–630 mm, custom lengths Pre-fabricated pipeline spools for fast site assembly
HDPE 90° Mitered (Segmented) Elbow — SDR 11 DVS 2202, ISO 8085-3, WIS 4-32-14 PE100, black (3 or 5 segment) DN 400–1200 mm Large diameter bends where moulded elbows unavailable
HDPE Electrofusion Tapping Tee (EF) ISO 11413, EN 12201-3, IGEM/TD/3 PE100, integrated PE100 cutter Main DN 63–315 mm / Branch DN 20–110 mm Live gas and water main hot-tapping
HDPE PE100 Pipe — Large Diameter SDR 11, PN 16 ISO 4427-2, EN 12201-2, AWWA C906 PE100, black DN 630–1200 mm (ID up to ~1050 mm) Transmission mains, desalination intake/outfall
HDPE Compression Ferrule Clamp — Repair WIS 4-32-08, EN 805 SS304 clamp, EPDM liner, SS316 bolts DN 63–400 mm Emergency repair on HDPE or DI mains under pressure
HDPE Butterfly Valve Adapter Flange — SDR 11 ISO 8085-3, EN 1092-1 PN 10/16 PE100, black; compatible with EN 558 face-to-face DN 63–630 mm Inline isolation valves in HDPE pipeline systems
HDPE Backing Ring — Carbon Steel, Hot-Dip Galvanised ASME B16.5 PN 10/16, ISO 8085 CS A105, hot-dip galvanised to ISO 1461 DN 63–630 mm Economical flange backing with galvanised corrosion protection
HDPE Compression Saddle Tee — PP Body ISO 14236, EN 12201-3 PP saddle, SS clamp, EPDM seal Main DN 63–250 mm / Outlet DN 20–63 mm Service connections without pipe cutting or fusion
HDPE Drilled Socket (DSF) Valve Outlet Tee ISO 11413, EN 12201-3 PE100, black DN 63–315 mm Gas and water main service valve tie-in
HDPE Inspection Chamber Base — DN 315/400 EN 13598-2, ISO 21138 HDPE, black, integral benching Shaft DN 315 or DN 400 Manholes for sewer inspection and junction
HDPE Vacuum/Pressure Test End Cap Plug — SDR 11 ISO 8085-3, EN 12201-3 PE100, black; NPT test port DN 63–630 mm Hydrostatic and pneumatic pressure testing of HDPE pipelines
Technical Data

HDPE Pipe & Fittings Technical Specifications

Key performance parameters for PE100 pipe systems stocked by Gulf Union Ozone.

Pressure Ratings — PE100 at 20°C

SDR PN (bar) MOP Gas (bar) Wall Ratio
SDR 7.4PN 2510 bare = D/7.4
SDR 9PN 208 bare = D/9
SDR 11PN 164 bare = D/11
SDR 13.6PN 12.5—e = D/13.6
SDR 17PN 10—e = D/17
SDR 21PN 8—e = D/21
SDR 26PN 6.3—e = D/26

MRC at 20°C; apply temperature derating per ISO 4427 Annex A for service above 20°C.

Material Properties & Standards Compliance

Property PE100 PE80
MRS (Minimum Required Strength)10 MPa8 MPa
Design Stress (C=1.25)8 MPa6.3 MPa
Density≥ 955 kg/m³≥ 945 kg/m³
Elongation at Break> 600%> 600%
Temp. Operating Range-40°C to +60°C-40°C to +60°C
Thermal Expansion Coeff.1.5 × 10⁻⁴ /K1.5 × 10⁻⁴ /K
Hazen-Williams C Factor150150
Chemical ResistanceExcellent — acids, alkalis, salts, many solvents

Standards: ISO 4427, ISO 4437, EN 12201, EN 1555, ASTM D3035, ASTM F714, ASTM D2513, AWWA C906.

Why Us

Why Industrial Buyers in Saudi Arabia Choose Gulf Union Ozone

⚡

Local Stock — Same-Day Dispatch

HDPE pipes and fittings held in our Jeddah warehouse as safety stock. In-stock items dispatched same working day for orders confirmed before 12:00 KSA. Emergency supply available for shutdown support and urgent project requirements across the Kingdom.

📄

Documentation Ready to Ship

EN 10204 3.1 Mill Test Certificates, Certificates of Conformance, dimensional inspection reports, and packing lists prepared and submitted with every shipment. Hydrostatic test reports and third-party inspection facilitation available on request.

🏅

ISO 9001:2015 Documented Quality

Gulf Union Ozone (CR 4030570569) operates under an ISO 9001:2015 certified QMS. All HDPE material is sourced from approved mills, MTCs verified against pipe markings, and dimensional spot checks conducted before dispatch.

🗺

Nationwide KSA Delivery

Deliveries coordinated to Al Jubail, Yanbu, Ras Tanura, Riyadh, Dammam, Tabuk, Abha, and all 18 administrative regions of Saudi Arabia. Contracted logistics partners handle oversize and heavy pipe loads including low-loader transport for large-diameter spools.

Related Categories

Related Products & Services

Industrial Valves

Valves & Actuators

Ball valves, gate valves, butterfly valves, check valves and actuators — API, ASME, EN, and DIN standards.
Pipe Fittings

Steel Pipe Fittings

Carbon steel, stainless steel and alloy buttweld and socket-weld fittings — ASME B16.9, B16.11, ASTM A234, A403.
Aramco Approved

SAEP-347 Approved Products

Saudi Aramco SAEP-347 vendor-list approved products across valves, pipes, fittings, flanges and instrumentation.
Services

Supply & Procurement Services

Expediting, third-party inspection coordination, custom fabrication sourcing and project material management services.
Get a Quote

Request a HDPE Pipes & Fittings Quotation

Submit your bill of materials or tag list with pipe sizes, SDR class, pressure rating, end use (water / gas / industrial), and required quantities. We respond to all HDPE enquiries within 4 business hours KSA time. MTCs and dimensional data available for all items.

Email Enquiry Submit RFQ Form

CR 4030570569 | ISO 9001:2015 | Jeddah, Saudi Arabia

Inventory updated: August 2026

In Summary

Gulf Union Ozone Trading Co. supplies HDPE Pipes & Fittings to industrial customers across Saudi Arabia with delivery from our Jeddah warehouse — all products ship with original certificates and compliance documentation for Aramco, SABIC, and government projects.

In Summary

HDPE Pipes & Fittings from Gulf Union Ozone serves Saudi Aramco operations, SABIC, SADARA, SEC utilities, NEOM mega-projects, and major industrial facilities across the Kingdom — our inventory covers the most common specifications and grades.

In Summary

Gulf Union Ozone stocks a comprehensive range of HDPE Pipes & Fittings — contact us for immediate availability confirmation and a competitive quotation with full compliance documentation.

In Summary

For urgent HDPE Pipes & Fittings procurement in Saudi Arabia, WhatsApp +966 55 098 8062 — our team confirms stock availability within the hour and provides competitive quotations for Aramco, SABIC, SEC, and government projects.