Dust Collectors & Baghouse Filters — Saudi Arabia

Dust Collectors & Baghouse Filters Supplier Saudi Arabia — Pulse-Jet, Cartridge, Cyclone & Wet Dust Collectors In Stock

Gulf Union Ozone supplies a complete range of industrial dust collectors and baghouse filter systems for dust control and emission compliance across Saudi Arabia. Our portfolio covers pulse-jet reverse-flow baghouses (PTFE-coated, woven fibreglass, Nomex, and anti-static filter bags), cartridge dust collectors (cellulose, polyester, spunbond, and nano-fibre cartridges), cyclone separators for primary separation, wet dust collectors and scrubbers for hygroscopic and combustible dusts, shaker baghouses for low-energy batch applications, and electrostatic precipitators (ESP) for fine sub-micron particle capture. Filter media options include PTFE membrane (sub-micron, HEPA-comparable performance), Nomex meta-aramid to 220°C, Ryton PPS for acid gas resistance, anti-static fabrics for ATEX Zone 22 service, and high-temperature fibreglass. Applicable standards: NFPA 68/69 (explosion protection), ATEX Directive 2014/34/EU Zone 20/21/22, OSHA 29 CFR 1910.94. SASO PM10/PM2.5 emission limits. ISO 9001:2015 certified (CR 4030570569). Stocked and dispatched from Jeddah.

WhatsApp for Quote Submit RFQ

Dust collectors and baghouse filters for industrial dust control and SASO emission compliance in Saudi Arabia — Gulf Union Ozone Jeddah

Dust Collector Categories

Product Types in Stock

Gulf Union Ozone carries six dust collector and baghouse filter configurations for Saudi Arabia industrial, construction materials, chemical, and food processing facilities. All systems are designed to SASO PM10 and PM2.5 emission limits, ATEX Directive 2014/34/EU for combustible dust environments, and NFPA 68/69 explosion protection standards — matched to Saudi Arabia's challenging 50°C ambient, sand and dust environments, and stringent emission regulations.

Type 01

Pulse-Jet Baghouse (PTFE Bags, Online Cleaning)

Pulse-jet reverse-flow baghouses with online compressed-air cleaning for continuous dust collection in Saudi Arabia cement, minerals, and industrial plants. PTFE-coated woven polyester and fibreglass bags for sub-micron particle capture — outlet emissions consistently below 5 mg/Nm³. Air-to-cloth ratios 0.8–1.5 m/min for cement dust; 1.5–3.0 m/min for light mineral dust. Hopper anti-bridging vibrators; rotary airlock discharge; carbon steel or SS 316L housing; ATEX Zone 22 compliant options with earthed housing and anti-static bags. Gas volumes 500–500,000 m³/h.

Type 02

Cartridge Dust Collector (Compact, Low Airflow)

Cartridge dust collectors with pleated filter elements for compact dust collection in Saudi Arabia welding shops, machining facilities, and small process vents. Cellulose/polyester cartridges for dry mineral and metal dust (outlet <1 mg/Nm³); spunbond polyester for paint overspray and fibres; nano-fibre surface-loading cartridges for sub-micron dust and fume (outlet <0.1 mg/Nm³). Pulse-jet or mechanical shaker cleaning; carbon steel or SS 316L housing; cabinet and modular designs; floor-standing or ceiling-suspended. Airflow 500–50,000 m³/h. ATEX cartridge versions available.

Type 03

Cyclone Pre-Separator (Primary Separation)

Single-cyclone, multi-cyclone, and reverse-flow cyclone separators for primary dust separation upstream of a baghouse or cartridge collector in Saudi Arabia industrial facilities. Carbon steel and abrasion-resistant (AR400) lined cyclones for coarse mineral dust (d50 cut >5–10 µm). Collection efficiency 80–98% for particles above 10 µm. Reduces inlet dust load to the baghouse, extends bag life, and reduces compressed air cleaning frequency. SS 316L cyclones for moist or corrosive dust streams. Multi-cyclone banks for high-volume gas streams to 200,000 m³/h. Dust hopper with rotary airlock or slide gate discharge.

Type 04

Wet Dust Collector (Combustible / Hygroscopic Dust)

Wet dust collectors and scrubbers for combustible, hygroscopic, sticky, or water-reactive dusts in Saudi Arabia facilities where dry baghouse operation is unsuitable. Venturi scrubber types for high-energy gas-liquid contact (particle capture ≥99% above 2 µm); impingement wet collectors for water-reactive metal dusts (aluminium, magnesium, titanium); packed bed wet collectors for combined dust and acid gas. SS 316L or FRP construction; recirculation pump and sump; water treatment and blowdown controls. Suitable for wood dust, carbon black, titanium grinding, and flammable paint mist collection.

Type 05

High-Temperature Baghouse (Nomex/Ryton, Kiln Exhaust)

High-temperature pulse-jet baghouses with Nomex meta-aramid (to 220°C continuous), woven fibreglass (to 260°C continuous), Ryton PPS (to 190°C continuous with acid gas resistance), and P84 polyimide (to 240°C continuous) filter bags for kiln exhaust, incinerator off-gas, spray dryer exhaust, and rotary dryer emission control in Saudi Arabia cement, ceramics, lime, and industrial facilities. PTFE membrane laminate available on all bag substrates for sub-micron performance and enhanced cleanability. Gas conditioning systems (dilution air or heat exchangers) for inlet temperature management supplied as complete packages.

Type 06

ATEX Dust Collector (Zone 20/21/22 Compliant)

ATEX-certified dust collectors for combustible dust environments in Saudi Arabia grain, flour, fertiliser, coal, sulphur, and pharmaceutical powder handling facilities. Zone 20 compliant housings with explosion vent panels sized to NFPA 68 and EN 14797; Ex-e and Ex-d motor and fan drives rated to Category 2D or 3D; antistatic filter bags to EN ISO 284; earthed housing and conductive hopper. Double-flap or drop-through rotary airlock for explosion isolation at the hopper discharge. Flameless venting options for indoor collectors. ATEX certification documentation provided for Zone 20 equipment installation within Saudi Arabia industrial risk assessments.

Product Catalog

Complete Dust Collectors & Baghouse Filters Range — 26+ Models

All dust collectors supplied with filter media certification, housing inspection reports, pulse valve test records, and explosion protection documentation where applicable. ATEX Zone 20/21/22 certification packages available. SASO emission compliance data provided for all models. ISO 9001:2015 QMS (CR 4030570569).

Type / Model	Gas Volume / Filter Area	Filter Media / Cleaning	Emission Level / Temperature	ATEX / Application
Pulse-Jet Baghouse — PTFE-Coated Polyester (Standard Duty)	1,000–50,000 m³/h / Cloth area 50–2,000 m²	PTFE-coated polyester felt / Pulse-jet online	<10 mg/Nm³ / To 130°C continuous	Zone 22 option / Cement, mineral, fertiliser dust
Pulse-Jet Baghouse — PTFE Membrane Laminate (Sub-Micron)	500–200,000 m³/h / Cloth area 25–8,000 m²	PTFE membrane on polyester or glass / Pulse-jet	<5 mg/Nm³ / To 150°C (polyester) / 260°C (glass)	Zone 22 / Cement mill, mineral grinding, power station
Pulse-Jet Baghouse — Anti-Static Bags (ATEX Zone 22)	500–100,000 m³/h / Cloth area 25–4,000 m²	Anti-static polyester felt (EN ISO 284) / Pulse-jet	<10 mg/Nm³ / To 130°C	Zone 22 certified / Grain, fertiliser, sulphur dust
Pulse-Jet Baghouse — ATEX Zone 20/21 with Explosion Venting	500–50,000 m³/h / Cloth area 25–2,000 m²	Anti-static bags + explosion vent to NFPA 68 / Pulse-jet	<10 mg/Nm³ / To 130°C	Zone 20/21 certified / Grain, coal, aluminium powder
Pulse-Jet Baghouse — Large Volume Industrial (Cement / Power)	50,000–500,000 m³/h / Cloth area 2,000–20,000 m²	PTFE membrane fibreglass bags / Pulse-jet online	<5 mg/Nm³ / To 200°C	Zone 22 / Kiln preheater, raw mill, coal mill vents
Shaker Baghouse — Low-Energy (Batch, Small Flow)	100–5,000 m³/h / Cloth area 5–200 m²	Woven polyester or acrylic bags / Mechanical shake	<20 mg/Nm³ / To 120°C	None / Woodworking, light dust — batch process
High-Temperature Baghouse — Nomex Meta-Aramid (to 220°C)	1,000–100,000 m³/h / Cloth area 50–4,000 m²	Nomex needle-felt (meta-aramid) / Pulse-jet	<10 mg/Nm³ / 180–220°C continuous	Zone 22 / Cement kiln, lime kiln, rotary dryer
High-Temperature Baghouse — Woven Fibreglass (to 260°C)	2,000–200,000 m³/h / Cloth area 100–8,000 m²	Woven fibreglass (PTFE-treated) / Pulse-jet or shaker	<10 mg/Nm³ / 200–260°C continuous	Zone 22 / Fired ceramic kiln, glass furnace exhaust
High-Temperature Baghouse — Ryton PPS (Acid Gas + Heat)	1,000–50,000 m³/h / Cloth area 50–2,000 m²	Ryton PPS needle-felt / Pulse-jet	<10 mg/Nm³ / 160–190°C continuous	Zone 22 / MSW incinerator, hazardous waste kiln
High-Temperature Baghouse — P84 Polyimide (to 240°C)	500–30,000 m³/h / Cloth area 25–1,200 m²	P84 polyimide needle-felt / Pulse-jet	<5 mg/Nm³ / 200–240°C continuous	Zone 22 / High-temp incinerator, specialty kiln
Cartridge Dust Collector — Cellulose/Polyester (Standard)	500–30,000 m³/h / Cartridge count 2–200	Cellulose-polyester pleated cartridge / Pulse-jet	<1 mg/Nm³ / To 80°C	None / Welding fume, metal dust, woodworking
Cartridge Dust Collector — Nano-Fibre Surface Loading	200–20,000 m³/h / Cartridge count 2–100	Nano-fibre polyester pleated / Pulse-jet	<0.1 mg/Nm³ / To 120°C	Zone 22 option / Sub-micron fume, pharma powder
Cartridge Dust Collector — Spunbond Polyester (Paint Overspray)	1,000–20,000 m³/h / Cartridge count 4–80	Spunbond polyester cartridge / Pulse-jet	<1 mg/Nm³ / To 80°C	Zone 22 / Paint overspray, fibres, light aerosol
Single Cyclone Separator (Primary, Carbon Steel)	500–50,000 m³/h / Cut point d50 5–15 µm	Carbon steel body / Centrifugal — no media	80–95% efficiency (>10 µm) / To 350°C	Zone 22 / Pre-separator before baghouse — cement, minerals
Single Cyclone Separator — AR400 Lining (High Abrasion)	500–30,000 m³/h / Cut point d50 8–20 µm	CS body + AR400 ceramic tile lining / Centrifugal	80–95% efficiency / To 400°C	Zone 22 / Silica sand, clinker, highly abrasive dust
Multi-Cyclone Bank (High Efficiency, Small-Diameter Tubes)	5,000–200,000 m³/h / Cut point d50 3–8 µm	CS multi-tube bank / Centrifugal — no media	85–98% efficiency / To 300°C	Zone 22 / Boiler fly ash, catalyst fines separation
Wet Dust Collector — Venturi Scrubber (Combustible Dust)	1,000–50,000 m³/h / Venturi throat SS 316L	Water scrubbing / Venturi gas-liquid contact	≥99% (>2 µm) / To 250°C inlet (quench)	Combustible / hygroscopic dust — safe alternative to dry baghouse
Wet Dust Collector — Impingement Type (Metal Dust)	200–10,000 m³/h / SS 316L	Water + impingement baffles / Wet scrub	≥95% (>5 µm) / To 80°C	Reactive metal dust (Al, Mg, Ti) — water reaction safety
Electrostatic Precipitator (ESP) — Dry Wire-Plate	10,000–500,000 m³/h / SCA 30–120 m²/(m³/s)	CS discharge wires + collecting plates / Rapping	<20 mg/Nm³ / To 450°C	None (non-comb.) / Power station, cement kiln, incinerator
Electrostatic Precipitator (ESP) — Wet Plate (Acid Mist)	1,000–50,000 m³/h / SS 316L or lead plates	Conductive collecting plates / Water wash	<5 mg/Nm³ / To 80°C	None / Sulphuric acid mist, tar mist, oil mist removal
Replacement Filter Bags — Polyester / PTFE-Coated (Standard)	Dia. 100–200 mm / Length 1.5–10 m / Snap-band or weld-ring	PTFE-coated polyester felt / Matched to OEM spec	<10 mg/Nm³ / To 130°C	All makes / Saudi cement, mineral, and industrial plant
Replacement Filter Bags — Nomex / Fibreglass / Ryton (HT)	Dia. 100–200 mm / Length 1.5–10 m	Nomex / Fibreglass / Ryton — matched to OEM spec	<10 mg/Nm³ / 160–260°C	All HT makes / Kiln, incinerator, dryer baghouses
Pulse Valves, Diaphragm Valves & Solenoid Sets (Replacement)	1/2"–3" pulse valve / 6 V DC or 24 V DC solenoid	Nylon or Al body + neoprene or PTFE diaphragm	—	All makes / Replacement cleaning valves for Saudi baghouses
Rotary Airlock Valve (Hopper Discharge, Dust-Tight)	DN 100–DN 400 / Capacity 0.1–10 m³/h	CS or SS 316L rotor + body / IP55 gearmotor	—	ATEX Zone 21 option / Dust-tight hopper discharge
Explosion Vent Panel (Dust Collector / Silo, NFPA 68)	Custom area 0.05–4 m² / Pstat 0.005–0.15 barg	Aluminium alloy or SS 316L panel + EPDM seal	—	Zone 20/21 / Baghouse, silo, bucket elevator protection
Dust Collector Control Panel — Timer or Differential Pressure	4–500 pulse outputs / 24 V DC or 110/240 V AC	IP55/IP65 enclosure / DP sensor + sequence timer	—	ATEX option / Cleaning control for all pulse-jet baghouses

Why Us

Why Industrial Buyers in Saudi Arabia Choose Gulf Union Ozone for Dust Collectors & Baghouse Filters

⚠

ATEX Zone 20/21 Explosion-Proof Dust Collectors

Gulf Union Ozone supplies ATEX Zone 20, 21, and 22 compliant dust collectors to ATEX Directive 2014/34/EU and NFPA 68/69 — with explosion vent panels, Ex-rated motors, anti-static filter bags, and earthed housings for grain, fertiliser, sulphur, coal, and pharmaceutical dust handling in Saudi Arabia industrial facilities.

📄

PTFE Membrane Bags for Sub-Micron Saudi Dust

PTFE membrane laminate filter bags achieve outlet emissions below 5 mg/Nm³ — far below SASO PM10 and PM2.5 limits — and are particularly effective at capturing the ultra-fine silica, calcium carbonate, and mineral dust generated in Saudi Arabia's desert environment and cement, mineral, and construction materials industries.

🔥

ISO 9001:2015 Certified

Gulf Union Ozone operates under ISO 9001:2015 (CR 4030570569). Every dust collector system is supplied with filter media certification, housing inspection reports, pulse valve test documentation, ATEX certification package (where applicable), and SASO emission compliance data to support Saudi Arabia EPC contractor and plant engineer project documentation.

🗺

Jeddah Stock & Saudi Nationwide Delivery

Replacement filter bags (polyester, PTFE-coated, Nomex, fibreglass, Ryton), pulse valves, rotary airlocks, and explosion vent panels are stocked in Jeddah for immediate dispatch across Saudi Arabia — Jubail, Yanbu, Dammam, Riyadh, Jizan, and Tabuk. Complete dust collector systems are engineered and delivered to project schedules. ISO 9001:2015 (CR 4030570569).

Also Stocked at Gulf Union Ozone

Process Equipment

Industrial Fans & Blowers

Centrifugal and axial induced-draft fans and blowers for dust collection system suction in Saudi Arabia industrial plants — FRP, PP, and SS 316L for corrosive gas duty — matched to baghouse and cyclone pressure drop requirements.

Material Handling

Conveyor Systems

Belt, screw, and bucket elevator conveyors for dust collector hopper discharge and reclaim of collected material in Saudi Arabia fertiliser, cement, and minerals processing facilities — ATEX compliant options available.

Environmental

Environmental Monitoring Equipment

CEMS and ambient dust monitoring equipment for PM10 and PM2.5 compliance verification and stack emission monitoring at Saudi Arabia industrial facilities per SASO and NCEC requirements — matched to baghouse outlet measurement ports.

Material Handling

Pneumatic Conveying Systems

Dense phase and dilute phase pneumatic conveying systems for fine dust and powder transfer from dust collector hoppers to silos in Saudi Arabia industrial and process plants — complete with filter receivers and rotary valves.

Frequently Asked Questions

Dust Collectors & Baghouse Filters in Saudi Arabia — Common Questions

What dust collector design do I need for cement, fertiliser, and mineral dust in Saudi Arabia?

The correct dust collector design for cement, fertiliser, and mineral dust in Saudi Arabia depends on gas volume, dust load, particle size distribution, gas temperature, moisture content, and required outlet emission concentration to meet SASO PM10 and PM2.5 limits. For cement and mineral dust applications — such as cement mill vents, clinker cooler exhaust, raw mill vents, and packing plant dust collection — Gulf Union Ozone recommends a pulse-jet reverse-flow baghouse as the primary design. Pulse-jet baghouses are the dominant technology for cement and mineral dust because they offer continuous online filter bag cleaning (no production shutdown for cleaning), compact filter-to-cloth ratio (typically 1.0–1.5 m/min air-to-cloth ratio for cement dust), and outlet emissions consistently below 10 mg/Nm³ — well within SASO limits. For cement and mineral dust with high moisture content or hygroscopic tendencies (such as fertiliser dust — ammonium nitrate, urea, DAP), PTFE-coated filter bags (woven polyester or fibreglass substrate with PTFE membrane laminate) are specified to prevent bag blinding and maintain cleaning efficiency in humid Saudi Arabia coastal environments. Cyclone pre-separators upstream of the baghouse are recommended when the inlet dust load exceeds 20–30 g/Nm³ — removing coarse particles in the cyclone reduces bag wear, extends bag life, and reduces compressed air consumption for pulse cleaning. For fertiliser packing plant dust collection, anti-static bag fabrics meeting EN ISO 11058 are specified to prevent static discharge ignition in ATEX Zone 22 environments. Contact Gulf Union Ozone with your gas volume (m³/h), dust type and bulk density, inlet dust concentration, gas temperature, and required outlet emission limit for a sizing recommendation.

What ATEX requirements apply to dust collectors in Saudi Arabia industrial facilities?

ATEX requirements for dust collectors in Saudi Arabia industrial facilities handling combustible dusts — grain, flour, sugar, fertiliser, coal, sulphur, pharmaceutical powder, and fine organic dust — are defined by ATEX Directive 2014/34/EU and the supporting EN 60079-10-2 zone classification standard. Zone classification within and around dust collectors is as follows: Zone 20 applies continuously inside the dust collector housing, filter bag compartment, and dust hopper — where a cloud of combustible dust is present during normal operation; Zone 21 applies at locations where a dust cloud is likely occasionally during normal operation, such as at bag change ports, inspection hatches, rotary airlock discharge points, and compressed air cleaning pulse exhausts; Zone 22 applies in the surrounding area outside the collector housing where a dust cloud is unlikely under normal conditions but may occur in abnormal situations such as a housing leak or access door left open. For Zone 20 and Zone 21 service, Gulf Union Ozone supplies dust collectors with explosion vent panels sized and located to EN 14797 and NFPA 68 (Standard on Explosion Protection by Deflagration Venting) — these relief panels open at a low static activation pressure and vent the fireball to a safe external location. For indoor collectors where venting to atmosphere is not possible, flameless explosion venting devices and chemical suppression systems are available. All motor and electrical components inside Zone 21 are rated Ex-e (increased safety) or Ex-d (flameproof) at minimum ignition temperature matched to the dust. The minimum ignition energy (MIE) of the dust must be assessed — low-MIE dusts (such as lycopodium, aluminium, or magnesium) require Ex-d equipment and earthing and bonding of all metal components. Rotary airlock valves on the hopper discharge are double-flap or drop-through type to maintain explosion isolation between the dirty-gas inlet and the clean transport system below.

What filter bag materials do you recommend for high-temperature kiln and incinerator exhaust in Saudi Arabia?

Filter bag material selection for high-temperature kiln and incinerator exhaust in Saudi Arabia is critical because operating above the temperature rating of a bag fabric causes rapid strength loss, shrinkage, and catastrophic bag failure — leaving the plant without dust control and potentially causing SASO emission exceedances. Gulf Union Ozone supplies a full range of high-temperature filter bag fabrics matched to gas temperature and chemical composition. For exhaust temperatures between 150°C and 220°C continuous — typical of cement kiln preheater exhaust, lime kiln, rotary dryer, and spray dryer applications — Nomex (meta-aramid fibre) woven or needle-felt bags are the standard specification. Nomex maintains tensile strength and dimensional stability to 220°C continuous (240°C peak) and resists moderate concentrations of acid gases (SO2, HCl) that are present in kiln exhaust. For temperatures between 200°C and 260°C continuous — fired ceramic kilns, glass furnace exhaust, and high-temperature dryers — woven fibreglass bags with PTFE membrane laminate (PTFE + glass substrate) are specified. PTFE-laminated fibreglass provides excellent chemical resistance to SO2, HF, and acid mist alongside high-temperature performance to 260°C continuous. For exhaust with combined high temperature and strong acid gas presence (HCl, SO2, acid dew point concerns) in the 180–240°C range — municipal solid waste incinerators and hazardous waste kilns — Ryton PPS (polyphenylene sulphide) needle-felt bags are specified. Ryton PPS resists concentrated sulphuric acid and HCl at elevated temperatures where Nomex would be chemically attacked. For the most demanding incinerator or speciality kiln exhaust at 220–240°C with acid gases and fine sub-micron particle capture requirements, P84 polyimide (PI) bags or PTFE membrane-laminated P84 are used. For all high-temperature applications, bag seating temperatures must be managed by gas conditioning or dilution air to stay within the rated bag temperature before the baghouse is placed in service.

Get a Quote

Request a Dust Collectors & Baghouse Filters Quotation

To receive a fast and accurate quotation, provide: dust collector type (pulse-jet/cartridge/cyclone/wet/ESP), gas volume flow (m³/h), dust type and inlet dust concentration (g/Nm³), gas temperature, required outlet emission limit (mg/Nm³ or SASO specification), ATEX zone classification (if applicable), filter bag fabric preference (PTFE/Nomex/fibreglass), and installation site location in Saudi Arabia.

WhatsApp — Dust Collector Quote Email Inquiry Submit RFQ Form

Recent Deliveries

• Pulse-jet baghouse (10,000 m³/h, PTFE-coated bags) for cement dust at a Riyadh building materials factory, 2026
• Cartridge dust collector for welding fume at a Jubail fabrication workshop, 2026
• High-temperature baghouse filters (Nomex media) for kiln exhaust at a ceramics plant in Jeddah, 2026

CR 4030570569 | ISO 9001:2015 | Jeddah, Saudi Arabia — Saudi Aramco vendor compliance · SAEP-347 credentials

Technical content reviewed by Gulf Union Ozone's Engineering Team, Jeddah — 2026