Conveyor Systems Supplier Saudi Arabia

Conveyor System Categories

Product Types in Stock

Gulf Union Ozone carries six conveyor system types engineered for Saudi Arabia's harsh climate conditions — extreme heat, dust storms, and demanding bulk material characteristics. All systems are designed to CEMA, DIN 22101, and FEM 2.131 international standards, with ATEX-compliant options for combustible dust Zone 20/21/22 environments in fertiliser, grain, and chemical handling facilities across the Kingdom.

Type 01

Rubber Belt Conveyor (Troughed, CEMA Grade)

Troughed rubber belt conveyors to CEMA standards for bulk material transport in Saudi Arabia industrial facilities. Belt widths 500–1800 mm; CEMA B, C, and D idler sets (20°, 35°, 45° trough angle); EP and NN fabric carcass belts with SHR/HR heat-resistant covers for Saudi 50°C+ ambient. ST steel cord belts for long overland systems. FRAS (fire-resistant, anti-static) belt compound for combustible dust service (ATEX Zone 22). Head drives, take-up pulleys, belt cleaners, and skirt board sealing included. Capacities to 5,000 t/h.

Type 02

Screw Conveyor (U-Trough & Enclosed Tube)

Screw conveyors to CEMA screw conveyor standard for dry and wet bulk materials in Saudi Arabia industrial, chemical, and food processing facilities. U-trough type for open conveying of granular solids — carbon steel with AR hard-face flight edges for abrasive materials; SS 316L for food-grade, hygroscopic, or corrosive products. Enclosed tube screw conveyors for dusty or moisture-sensitive materials. Variable-pitch flighting for live-bottom bin discharge. Shaft seal options: compression packing, lip seal, and mechanical seal. Drives 0.37–75 kW.

Type 03

Belt & Chain Bucket Elevator

Belt and chain bucket elevators to FEM 2.131 for vertical elevation of dry bulk materials in Saudi Arabia industrial and agricultural facilities. Belt bucket elevators (centrifugal discharge) for free-flowing dry materials — grain, fertiliser, sand, fly ash — to 50 m height. Chain bucket elevators (continuous discharge) for fragile, lumpy, or hot materials — clinker, catalyst, salt — where low-speed gentle handling is required. Casing in carbon steel or SS 316L; polyethylene or steel buckets; ATEX Zone 20 compliant casings with explosion relief panels for combustible dust service.

Type 04

Vibratory Conveyor & Feeder

Vibratory conveyors and feeders for controlled metering and conveying of dry bulk solids in Saudi Arabia process and packaging facilities. Natural frequency (resonant) and brute-force drive types; carbon steel and SS 316L troughs; PTFE-coated or polyurethane-lined troughs for sticky or corrosive products. Vibratory feeders for uniform volumetric discharge from hoppers and silos (feedrate ±2%). Suitable for hot material (clinker, slag) up to 400°C, fragile material (tablets, pellets), and corrosive chemicals where belt conveyor maintenance is excessive.

Type 05

Drag Chain / Scraper Conveyor

Drag chain (scraper) conveyors for horizontal and slightly inclined conveying of fine, dusty, or hot bulk materials in enclosed troughs — ideal for fly ash, cement, lime, and fertiliser dust in Saudi Arabia power and cement plants where belt conveyors cannot operate in the fine material. Single-strand and twin-strand drag chain in carbon steel or hardened steel; SS 316L trough lining for corrosive materials; sealed trough for dust containment to SASO air quality requirements; ATEX Zone 22 compliant versions. Capacities 5–500 t/h; lengths to 100 m.

Type 06

Apron / Slat Conveyor (Heavy Lumpy Material)

Apron and slat conveyors for heavy, lumpy, or sharp-edged bulk materials — ore, rock, demolition waste, large clinker lumps, and scrap metal — in Saudi Arabia quarrying, mining, and heavy industry where rubber belt conveyors would suffer rapid cover damage. Overlapping steel apron plates (3–12 mm thick) on double-strand roller chain; carbon steel or AR400 abrasion-resistant plate; water-cooled apron sections for hot material discharge from kilns and furnaces. Drive power 5–500 kW; belt widths 400–2,400 mm; inclinations to 30°.

Product Catalog

Complete Conveyor Systems Range — 26+ Models

All conveyor systems supplied with CEMA engineering calculations, material test certificates, dimensional inspection reports, and drive selection documentation. ATEX Zone 20/21/22 certification available for combustible dust service. High-temperature and food-grade belt options available. ISO 9001:2015 QMS (CR 4030570569).

Type / Grade	Capacity / Belt or Screw Dia.	Material / Drive kW	Inclination / Max Temp	Bulk Material / Application
Troughed Belt Conveyor — EP SHR Cover, CEMA B Idlers	50–800 t/h / Belt 500–800 mm	EP carcass SHR cover / Drive 2.2–30 kW	0–18° / Ambient to 80°C	Fertiliser, grain, salt — Saudi warehouse and port handling
Troughed Belt Conveyor — EP HR Cover, CEMA C Idlers	200–2,000 t/h / Belt 800–1,200 mm	EP/NN carcass HR cover / Drive 11–132 kW	0–20° / Ambient to 70°C	Sand, clinker, minerals — Saudi industrial plant conveying
Troughed Belt Conveyor — EP SHR Cover, CEMA D Idlers (Heavy)	500–5,000 t/h / Belt 1,200–1,800 mm	EP carcass SHR cover / Drive 37–500 kW	0–18° / Ambient to 80°C	Ore, phosphate, heavy bulk — Saudi mines and ports
Overland Belt Conveyor — Steel Cord (ST) Belt, Long Centre	500–8,000 t/h / Belt 1,000–1,800 mm / Length to 10 km	ST steel cord, FRAS cover / Drive 75–1,500 kW	0–15° / Ambient to 80°C	Phosphate, coal, ore — Saudi mining and industrial overland
Troughed Belt Conveyor — FRAS (Fire-Resistant Anti-Static, ATEX Z22)	50–1,500 t/h / Belt 500–1,200 mm	EP FRAS cover / Ex-e motor, IP65 drive	0–20° / Ambient to 60°C	Grain, flour, sulphur, fertiliser dust — combustible dust facilities
Flat Belt Conveyor — Food Grade (SS 316L Frame, PU Belt)	1–50 t/h / Belt 300–1,000 mm	SS 316L frame + PU food-grade belt / Drive 0.37–7.5 kW	0–5° / Ambient to 50°C	Food, pharmaceutical, packaging — Saudi food processing
Screw Conveyor — U-Trough, Carbon Steel, Standard Pitch	5–200 t/h / Screw dia. 150–500 mm	Carbon steel trough and flight / Drive 0.75–22 kW	0–15° max / Ambient to 50°C product	Dry granular fertiliser, grain, cement — Saudi plant conveying
Screw Conveyor — U-Trough, SS 316L (Food / Chemical Grade)	2–100 t/h / Screw dia. 100–400 mm	SS 316L trough, flight, and shaft / Drive 0.75–15 kW	0–15° max / Ambient to 60°C	Wet sludge, chemical powder, food products — corrosive duty
Screw Conveyor — Enclosed Tube, Carbon Steel (Dust-Tight)	2–80 t/h / Screw dia. 100–400 mm	CS tube and flight, shaft seal / Drive 0.75–18.5 kW	0–90° (vertical) / Ambient to 70°C	Fly ash, lime, cement — dust-tight enclosed conveying
Screw Conveyor — Hard-Face AR Flight (High Abrasion)	5–150 t/h / Screw dia. 200–500 mm	CS trough + AR400 hard-face flight / Drive 2.2–30 kW	0–15° / Ambient to 80°C material	Silica sand, catalyst, crushed mineral — abrasive bulk service
Belt Bucket Elevator — Centrifugal Discharge, Carbon Steel	10–500 t/h / Height 5–50 m / Bucket 160–800 mm	CS casing + PE buckets on EP belt / Drive 2.2–90 kW	Vertical / Material to 60°C	Grain, fertiliser, sand, fly ash — Saudi silo filling and plant elevation
Belt Bucket Elevator — ATEX Zone 20 (Combustible Dust)	10–300 t/h / Height 5–40 m	CS casing, antistatic belt, Ex-d motor / Explosion relief panel	Vertical / Material to 50°C	Grain, flour, sugar — ATEX Zone 20 compliant elevator
Chain Bucket Elevator — Continuous Discharge (Heavy Material)	5–200 t/h / Height 5–30 m	CS casing, hardened steel chain, steel buckets / Drive 5.5–75 kW	Vertical / Material to 250°C	Clinker, catalyst, salt, lumpy material — gentle low-speed elevation
Chain Bucket Elevator — SS 316L (Corrosive / Food Service)	2–80 t/h / Height 3–20 m	SS 316L casing, chain, and buckets / Drive 1.5–22 kW	Vertical / Material to 100°C	Food, pharma, corrosive powder — hygiene or chemical duty elevation
Vibratory Conveyor — Natural Frequency (Resonant Drive)	1–500 t/h / Trough width 200–1,500 mm / Length to 20 m	CS or SS 316L trough / Drive 0.25–11 kW	0–5° / Material to 400°C	Hot clinker, slag, pellets, salt — gentle low-energy conveying
Vibratory Feeder — Grizzly / Electromechanical (Hopper Discharge)	Feedrate 0.5–2,000 t/h / Trough 300–2,000 mm	CS or AR plate trough / Drive 0.1–30 kW	0–5° / Material to 200°C	Hopper and silo discharge feeder — uniform volumetric flow ±2%
Drag Chain Conveyor — Single Strand (Fine Dust)	5–200 t/h / Trough 200–800 mm / Length to 60 m	CS sealed trough + carbon steel chain / Drive 1.5–37 kW	0–20° / Material to 120°C	Fly ash, cement, lime dust — sealed dust-tight conveying
Drag Chain Conveyor — Twin Strand (Heavy Bulk)	20–500 t/h / Trough 400–1,200 mm / Length to 100 m	CS AR-lined trough + hardened chain / Drive 7.5–132 kW	0–15° / Material to 200°C	Clinker, slag, hot ash — Saudi power and cement plant duty
Drag Chain Conveyor — SS 316L (Corrosive / Food)	2–100 t/h / Trough 200–600 mm	SS 316L trough and chain / Drive 1.5–22 kW	0–15° / Material to 80°C	Food powder, chemical granules — corrosive duty scraper conveying
Apron Conveyor — Carbon Steel Apron, Standard Duty	10–500 t/h / Apron 400–1,200 mm / Length to 50 m	CS 6 mm apron + roller chain / Drive 5.5–90 kW	0–30° / Material to 150°C	Rock, ore, demolition rubble — Saudi quarry and recycling duty
Apron Conveyor — AR400 Plate, Heavy Abrasive Duty	20–1,000 t/h / Apron 600–2,400 mm / Length to 60 m	AR400 12 mm apron + heavy chain / Drive 15–315 kW	0–30° / Material to 200°C	Large clinker, hot sinter — kiln and furnace discharge conveying
Slat Conveyor — Flat Steel Slats (Pallet / Part Conveying)	To 5,000 kg/m² surface load / Width 300–1,500 mm	CS or SS 316L flat slats + roller chain / Drive 1.5–37 kW	0–5° / Ambient to 80°C	Pallet conveying, assembly lines, forge part handling — Saudi factory
Mobile / Portable Belt Conveyor (Radial Stacker)	50–800 t/h / Belt 500–1,000 mm / Reach to 30 m	EP SHR belt + wheeled chassis / Drive 7.5–55 kW	0–30° / Ambient to 60°C	Aggregate, sand, gravel stacking — Saudi construction and mining
Conveyor Idler Sets — CEMA B / C / D (Replacement)	Belt width 500–1,800 mm / Troughing 20°, 35°, 45°	CS or SS 316L shell + sealed bearing / Trough, return, impact	Flat, troughed, return / Ambient to 80°C	Replacement idler sets for all Saudi belt conveyor maintenance
Belt Conveyor Accessories — Scrapers, Skirting & Take-Up	Belt width 500–1,800 mm	Polyurethane blade scrapers, rubber skirt boards, screw/gravity take-up	—	Carryback removal, spillage control, belt tracking — all Saudi conveyors
Conveyor Drive Package — Gearmotor + VFD (Variable Speed)	Drive 0.37–315 kW / Speed ratio to 1:200	Helical-bevel gearmotor, VFD (IP55/IP65), IEC motor	—	Soft-start, variable speed conveying duty — all Saudi conveyor types

Why Us

Why Industrial Buyers in Saudi Arabia Choose Gulf Union Ozone for Conveyor Systems

⚠

CEMA & DIN 22101 Engineering to International Standards

All conveyor systems are designed and supplied to CEMA (Conveyor Equipment Manufacturers Association), DIN 22101 (belt conveyors for bulk materials), and FEM 2.131 (bucket elevators) — the internationally recognised engineering standards referenced by Saudi Aramco, SABIC, and leading Saudi EPC contractors for bulk material handling project specifications.

📄

High-Temperature Belts & Components for Saudi 50°C+ Ambient

Gulf Union Ozone sources heat-resistant EP belts with SHR and HR compound covers specifically rated for Saudi Arabia's 50°C+ summer ambient temperatures. FRAS (fire-resistant, anti-static) belt grades for ATEX combustible dust environments and UV-stabilised covers for outdoor overland conveyor applications are stocked for rapid deployment.

🔥

ISO 9001:2015 Certified

Gulf Union Ozone operates an ISO 9001:2015 certified quality management system (CR 4030570569). Every conveyor system is supplied with CEMA engineering calculations, material test certificates, dimensional inspection documentation, and drive selection sheets to support EPC contractor and plant engineer project documentation requirements.

🗺

Jeddah Stock & Saudi Nationwide Delivery

Standard conveyor components — idler sets, belt sections, screw conveyor sections, drive packages, and accessories — are stocked in Jeddah for immediate dispatch across all 18 Saudi regions including Jubail Industrial City, Yanbu, Dammam, Riyadh, Jizan, and Tabuk. Complete conveyor system packages are fabricated and delivered to Saudi project schedules.

Also Stocked at Gulf Union Ozone

Material Handling

Material Handling Equipment

Hoppers, feeders, chutes, transfer stations, and bulk bag handling equipment for fertiliser, clinker, grain, and mineral bulk material handling in Saudi Arabia industrial facilities.

Process Equipment

Industrial Fans & Blowers

Centrifugal and axial process fans and blowers for conveyor belt ventilation, dust extraction at transfer points, and tunnel ventilation in Saudi Arabia warehouses, silos, and handling facilities.

Process Equipment

Dust Collectors & Baghouse Filters

Pulse-jet baghouse, cartridge, and cyclone dust collectors for conveyor transfer point dust control and material handling dust extraction in Saudi Arabia industrial plants — ATEX compliant.

Structural

Structural Steel Profiles

Structural steel sections, conveyor support framework, walkways, and access platforms in ASTM A36 and S355 for bulk material handling facilities and conveyor gallery structures in Saudi Arabia.

Frequently Asked Questions

Conveyor Systems in Saudi Arabia — Common Questions

What conveyor belt materials are suitable for outdoor use in Saudi Arabia's 50°C+ ambient temperatures?

Saudi Arabia's extreme outdoor ambient temperatures — regularly exceeding 50°C in summer in regions such as Jeddah, Riyadh, and the Eastern Province — place severe thermal stress on conveyor belt compounds, reducing belt life and causing premature cracking, delamination, and cover hardening if standard-grade belts are specified. Gulf Union Ozone supplies a range of heat-resistant conveyor belt grades specifically suited to Saudi Arabia outdoor service. EP (polyester-nylon fabric carcass) belts with SHR (super heat-resistant) and HR (heat-resistant) rubber covers are the standard specification for outdoor bulk handling in temperatures to 80°C ambient — the SHR compound maintains elasticity and crack resistance significantly longer than standard M-grade covers in Saudi summer conditions. For long overland conveyor systems carrying ore, coal, or phosphate in Saudi Arabia mining and minerals projects, steel cord (ST) belts with FRAS (fire-resistant and anti-static) covers are specified — they combine high tensile strength for long centre distances with excellent UV and ozone resistance in outdoor desert environments. UV-stabilised belt covers incorporating UV-inhibiting carbon black are standard for all outdoor Saudi applications. For high-temperature material conveying — clinker from cement kilns, hot sinter, or dried fertiliser granules at material temperatures above 60°C — heat-resistant EP belts with SHR covers rated to 120°C material temperature are supplied. Contact Gulf Union Ozone with your conveyor length, lift, belt speed, material temperature, and outdoor ambient exposure requirements for a matched belt grade recommendation.

What screw conveyor standards and materials do you recommend for fertiliser and chemical handling in Saudi Arabia?

Screw conveyor design in Saudi Arabia for fertiliser and chemical handling requires careful attention to material hygroscopicity, corrosivity, abrasiveness, and food-safety or regulatory requirements. Gulf Union Ozone supplies screw conveyors to CEMA (Conveyor Equipment Manufacturers Association) standard sizing methodology — CEMA Screw Conveyor for Bulk Materials — which defines conveyor selection by material factor, capacity factor, and horsepower per unit length for all common bulk solids. For dry granular fertiliser (urea, ammonium nitrate, DAP, MOP) in Saudi Arabia petrochemical and agri-distribution facilities, standard carbon steel U-trough or enclosed tube screw conveyors with hard-face or abrasion-resistant (AR) flight edges are recommended, as fertiliser granules have moderate abrasivity and the hygroscopic nature of most fertiliser products requires sealed cover sections with gasketted inspection doors to prevent moisture ingress and caking. For wet cake sludge, chemical powders, or corrosive products such as wet sulphur or ammonium sulphate, SS 316L U-trough and SS 316L helical flighting is the preferred specification — it resists the combined attack of moisture, ammonium compounds, and chloride contamination from Saudi Arabia's high-humidity coastal environments. Abrasion-resistant hard-face overlay welding on the flight OD is available for highly abrasive materials such as silica sand, catalyst, and fly ash. Variable-pitch flighting is available for live-bottom discharge from bins and hoppers. All screw conveyors supplied with shaft seal options (compression packing, lip seal, or mechanical seal) to prevent dust or product escape at trough end plates — critical for compliance with SASO air quality requirements.

Do your conveyor systems comply with ATEX requirements for combustible dust in Saudi Arabia?

Yes. Gulf Union Ozone supplies ATEX-compliant conveyor systems for Saudi Arabia facilities handling combustible dusts including grain, flour, sugar, coal, sulphur, fertiliser, and other organic or mineral powders classified under ATEX Directive 2014/34/EU. Zone classification for conveyor systems follows EN 60079-10-2 (classification of areas for explosive dust atmospheres): Zone 20 applies inside the conveyor housing or bucket elevator casing where a cloud of combustible dust is present continuously; Zone 21 applies at areas such as loading chutes, discharge points, and inspection doors where a dust cloud can be expected occasionally during normal operation; Zone 22 applies in surrounding areas where a dust cloud is not normally present but may occur in abnormal conditions — for example in the vicinity of a leaking split cover or at a belt scraper discharge. For Zone 20 and Zone 21 service, Gulf Union Ozone supplies conveyor drives and controls with Ex-e (increased safety) or Ex-d (flameproof) motor and gearbox assemblies to ATEX Category 2D / Equipment Group II, temperature class T135°C or T120°C matched to the minimum ignition temperature of the specific dust. Conveyor belts for combustible dust service are specified with antistatic (AS) or electrically conductive belt construction meeting EN ISO 284 surface resistance requirements — preventing static charge accumulation that could be an ignition source. Belt cover materials in FRAS (fire-resistant and anti-static) compounds are specified where both fire resistance and antistatic performance are required. Dust enclosure ratings of IP65 or higher are applied to all motor and control gear in dusty environments. Explosion relief panels to NFPA 68 are incorporated in bucket elevator casings and enclosed conveyor hoods where required by explosion risk assessment.

Get a Quote

Request a Conveyor Systems Quotation

To receive a fast and accurate quotation, provide: conveyor type (belt/screw/bucket elevator/vibratory), bulk material and bulk density, required capacity (t/h or m³/h), conveyor length and lift, belt width or screw diameter, maximum lump size, material temperature, ambient conditions (outdoor/indoor), ATEX zone classification (if applicable), and delivery location in Saudi Arabia.

WhatsApp — Conveyor Systems Quote Email Inquiry Submit RFQ Form

Recent Deliveries

• Rubber belt conveyor (1200 mm belt width, 100 m long) for fertiliser handling at a Yanbu plant, 2026
• SS 316L screw conveyors for wet cake transfer at a water treatment sludge dewatering facility in Riyadh, 2026
• Chain bucket elevator (25 m height) for granular catalyst handling at a Jubail petrochemical facility, 2026

CR 4030570569 | ISO 9001:2015 | Jeddah, Saudi Arabia — Saudi Aramco vendor compliance · SAEP-347 credentials

Conveyor Systems Supplier Saudi Arabia — Belt, Screw, Bucket Elevator & Vibratory Conveyors In Stock