How do I select the right spill kit for oil and chemical facilities in Saudi Arabia per SPCC and EPA requirements?

Spill kit selection for Saudi Arabia oil and gas facilities should follow the type and volume of liquids handled and the regulatory framework applicable to the site. For oil-only hazards — crude, diesel, hydraulic fluid, lubricating oil — use white oil-only polypropylene absorbents, which hydrophobically reject water and are ideal for outdoor bunded areas and refinery aprons. For chemical hazards including acids (H₂SO₄, HCl) and alkalis (NaOH), use yellow chemical (hazchem) kits with pH-indicating pads. For mixed-liquid environments, universal grey polypropylene kits handle oils, coolants, and water-based fluids. Under EPA 40 CFR 112 (SPCC rules) and equivalent SASO standards, facilities must hold spill response capability matching the volume of the largest single container or the largest reasonably foreseeable spill. A 1000-litre IBC of chemical should have at minimum a 100L wheeled drum spill kit plus a secondary containment bund. Gulf Union Ozone supplies 10L, 20L, 50L, and 100L wheeled drum kits with full documentation from our Jeddah warehouse.

How do I size a secondary containment bund for IBC and drum storage areas in KSA?

Secondary containment bund sizing in Saudi Arabia follows Saudi Aramco SAES requirements and international good practice: the bund must hold 110% of the largest single container volume, or 25% of the total stored volume — whichever is greater. For a standard 1000-litre IBC, specify a polyethylene IBC bund rated at 1000L or 1250L capacity. For multi-drum storage (200L drums), a 4-drum PE bund holds 880L total and satisfies the 110% rule for any single drum. For outdoor storage of transformer oil or bulk fuel, flexible collapsible PVC berms are available in custom dimensions. All Gulf Union Ozone polyethylene bunds are UV-stabilised, chemical-resistant, and compliant with BS EN 1825 and Saudi Aramco SAES-B-019 guidance for secondary containment.

Which drain covers and drain plugs should I use for emergency spill response at Saudi Arabia industrial sites?

Drain covers for emergency spill response at KSA industrial sites fall into three main categories. Drain seal mats (flat polyurethane or rubber covers) are the fastest to deploy — simply drop over the drain opening to create a chemical-resistant seal within seconds. Magnetic drain covers are used where the drain surround is metal (steel grating, cast iron frame) and provide a secure seal without tools. Inflatable pipe bungs (available in 50mm to 600mm diameter) are used for pipe inlets and below-grade drains where a surface seal is not possible — the inflatable bung is inserted and pumped up to create a pressure-rated seal. For pre-positioned spill prevention, spill guard drain inserts (neoprene and HDPE) provide continuous overflow protection for storm drains. Gulf Union Ozone stocks all types from our Jeddah warehouse with same-day dispatch for Saudi Arabia sites.

Spill Control & Containment Saudi Arabia

Spill Control & Containment Categories

Product Types in Stock

Gulf Union Ozone carries six core categories of spill control and secondary containment covering universal spill kits, chemical hazchem kits, absorbents, secondary containment bunds, drain protection, and spill response accessories. All products SASO compliant and supplied with technical documentation for Saudi Arabia oil & gas, chemical, and industrial sites.

Type 01

Universal Spill Kits

10L, 20L, 50L, and 100L wheeled drum spill kits for oil, coolants, and water-based liquids. Each kit contains polypropylene absorbent pads, booms, socks, and hazardous waste disposal bags. Rated for oils, lubricants, coolants, and water-based liquids. HAZCHEM drum kits for acids and alkalis also available. Marine spill kits (bilge and harbour configurations) stocked for coastal KSA facilities. Suitable for Saudi Arabia oil & gas facilities, refineries, warehouses, vehicle workshops, and maintenance areas. Wheeled drum kits enable fast deployment for rapid spill response to meet SASO and EPA SPCC time requirements.

Type 02

Chemical (Hazchem) Spill Kits

Acid-specific and universal pH-indicating absorbent pads for caustic and acid containment. Kits configured for H₂SO₄, NaOH, HCl, and solvent hazards. Sealed zip-bag kits for laboratory and process plant use; wheeled barrel configurations for large-volume chemical storage areas. Response time under 2 minutes with pre-staged accessories. Supplied with MSDS response guidance cards, nitrile gloves, goggles, and disposal bags. Colour-coded yellow pads instantly indicate neutralisation. Suitable for KSA chemical plants, water treatment facilities, laboratories, and industrial process areas handling aggressive liquids.

Type 03

Absorbent Pads, Rolls & Socks

Polypropylene absorbent pads in three types: universal grey (oils, coolants, water-based), oil-only white (hydrophobic, repels water), and chemical yellow (pH-indicating for acids/alkalis). Perforated rolls for cutting to size. Heavyweight 400 gsm and spunbonded 200 gsm grades. Absorbent booms and socks in 75mm, 100mm, and 150mm diameter × 3m length for drain and waterway protection. Loose granular absorbents (clay, perlite, and cellulose) for large-area spill recovery. High-visibility yellow chemical socks for permanent drain protection at Saudi Arabia industrial facilities. All pads supplied in boxes of 100 or rolls of 40m.

Type 04

Secondary Containment Bunds

Polyethylene modular bunding for IBC and drum storage. IBC bunds in 1000L and 1250L capacity for standard and oversized IBCs. Drum bunds for 1, 2, 4, and 6-drum configurations in UV-stabilised HDPE. Flexible collapsible PVC berms for outdoor transformer oil, fuel, and bulk chemical areas. HDPE sump pallets with removable grating for indoor and outdoor forklift access. All bunds designed for outdoor Saudi Arabia climate with UV-stabilised polyethylene for ambient temperatures up to 60°C. Complying with Saudi Aramco SAES secondary containment requirements, EPA 40 CFR 112, and BS EN 1825 guidance. Full range from stock in Jeddah.

Type 05

Drain Covers & Plug Kits

Square and round drain seal mats in polyurethane and neoprene for instant chemical-resistant drain sealing. Magnetic covers for metal-surround drains — no tools required, deploy in under 5 seconds. Inflatable pipe bungs for below-grade pipe inlets in 50mm to 600mm diameter range, pressure-rated for emergency sealing. "Not a drain" reflective signs and spill guard drain inserts for permanent storm drain protection. Fast-deploy drain sealing systems for emergency spill response teams in Saudi industrial facilities. Suitable for process plant drains, loading bays, transformer pads, fuel storage areas, and refinery aprons.

Type 06

Spill Response & Cleanup Accessories

HDPE hazardous waste disposal bags in yellow (chemical/clinical) and red (flammable waste), heavy-duty gauge. Spill response trolleys with wheeled drum, boom, pad, and sock compartments for rapid deployment. Bioremediation spill treatment granules for hydrocarbon-contaminated soil at outdoor Saudi Arabia sites. Universal granular absorbents in 20kg bags. Drum-handling trucks (SS 316 and HDPE wetted parts) for safe chemical drum movement. Portable sump pumps with SS 316 and HDPE wetted parts for pumping spilled liquids. Spill signage and barrier tape. Oil-water separator socks for outdoor storm drain protection in refinery and plant areas.

Product Catalog

Complete Spill Control & Containment Range — 28+ Products

All spill control products supplied with compliance documentation, safety data sheet guidance, and technical data sheets. ISO 9001:2015 QMS (CR 4030570569). Representative stock lines — contact us for specific sizes and project quantities.

Product	Capacity / Size	Material	Liquid Type	Standard	Application
Universal Spill Kit — 10L Bag	10L total absorbency	Polypropylene pads, booms, PP disposal bag	Oils, coolants, water-based	EPA 40 CFR 112 / SPCC	Vehicle workshops, maintenance bays, small plant areas
Universal Spill Kit — 20L Barrel	20L total absorbency	PP pads, socks, booms, HDPE barrel	Oils, lubricants, coolants	EPA 40 CFR 112 / SASO	Warehouses, loading bays, refinery service areas
Universal Spill Kit — 50L Wheeled Drum	50L total absorbency	PP pads, socks, booms, wheeled HDPE drum	Oils, coolants, water-based	EPA 40 CFR 112 / SPCC	Oil & gas plants, fuel tank farms, fabrication yards
Universal Spill Kit — 100L Wheeled Drum	100L total absorbency	PP heavyweight pads, booms, socks, wheeled drum	Oils, lubricants, coolants	EPA 40 CFR 112 / SPCC	Refineries, petrochemical plants, large KSA industrial facilities
Chemical (Hazchem) Spill Kit — 25L Acid	25L total absorbency	pH-indicating PP pads, acid socks, PE bag	Acids: H₂SO₄, HCl, HNO₃	SASO / EPA 40 CFR 112	Chemical plants, water treatment, battery rooms
Chemical (Hazchem) Spill Kit — 20L Caustic	20L total absorbency	pH-indicating PP pads, alkali socks, zip bag	Caustics: NaOH, KOH, ammonia	SASO / EPA 40 CFR 112	Chemical storage, process plant, cleaning chemical handling
Marine Spill Kit — Bilge / Harbour 20L	20L total absorbency	Oil-only white PP pads, booms, socks, drip bag	Oils and fuels (hydrophobic)	MARPOL / IMO guidelines	Jeddah port, coastal marine facilities, offshore KSA
Absorbent Pads — Universal Grey 400 gsm	400mm × 500mm; box of 100	Spunbonded polypropylene, heavyweight	Oils, coolants, water-based	EN 14899 / ASTM F726	Machinery drip trays, maintenance areas, general plant use
Absorbent Pads — Oil-Only White (Hydrophobic)	400mm × 500mm; box of 100	Polypropylene hydrophobic meltblown	Oil and fuel only (repels water)	EN 14899 / ASTM F726	Outdoor bunds, waterways, transformer areas, rainwater separation
Absorbent Pads — Chemical Yellow (pH-Indicating)	400mm × 500mm; box of 100	PP with pH-indicator, heavyweight	Acids, alkalis, solvents	EN 14899 / SASO	Chemical plant, laboratory, battery acid handling areas
Absorbent Roll — Perforated Universal Grey	500mm wide × 40m roll	Spunbonded polypropylene, perforated	Oils, coolants, water-based	EN 14899	Long machinery drip areas, conveyor drip protection, floor lining
Absorbent Boom — 75mm dia × 3m	75mm dia × 3,000mm	Polypropylene meltblown fill, PP sock	Oils, coolants, water-based	EN 14899 / ASTM F726	Drains, doorways, containment perimeters at KSA industrial sites
Absorbent Sock — 100mm dia × 3m	100mm dia × 3,000mm	PP meltblown fill, woven PP sock	Oils, coolants, chemical (yellow option)	EN 14899	Drain surrounds, machinery drip containment, bund perimeters
Absorbent Sock — 150mm dia × 3m (Heavy Duty)	150mm dia × 3,000mm	PP heavyweight meltblown fill	Oils, fuels, coolants	EN 14899 / ASTM F726	Large IBC bunds, tank farm perimeters, outdoor refinery areas
Granular Absorbent — Clay (20kg bag)	20kg bag; bulk pallet available	Granular attapulgite clay	Oils, solvents, water-based	EPA / SASO	Large outdoor spills, floor sweeping after liquid recovery
IBC Containment Bund — 1000L PE	1000L containment; 1200mm × 1200mm footprint	UV-stabilised polyethylene (HDPE)	All liquids including acids, alkalis, solvents	SAES-B-019 / EPA 40 CFR 112	Standard 1000L IBC secondary containment, outdoor KSA storage
IBC Containment Bund — 1250L PE	1250L containment; 1300mm × 1300mm footprint	UV-stabilised polyethylene (HDPE)	All liquids; chemical resistant	SAES-B-019 / EPA 40 CFR 112	Oversized or tall IBCs; transformer oil IBC storage
Drum Bund — 2-Drum Polyethylene	440L containment; holds 2 × 200L drums	UV-stabilised HDPE, removable grating	Oils, chemicals, solvents	EPA 40 CFR 112 / SPCC	Drum storage rooms, chemical stores, workshop areas
Drum Bund — 4-Drum Polyethylene	880L containment; holds 4 × 200L drums	UV-stabilised HDPE, removable grating	Oils, chemicals, fuels	EPA 40 CFR 112 / SPCC	Maintenance workshops, refinery lube storage, fuel drum areas
Flexible PVC Berm — Collapsible	Custom; standard 3m × 3m × 300mm H	Heavy-duty PVC with foam-filled walls	Oils, fuels, water-based, mild chemicals	EPA 40 CFR 112	Transformer oil containment, refuelling areas, temporary bunding
Drain Seal Mat — Square Polyurethane	300mm × 300mm / 600mm × 600mm	Polyurethane foam, chemical-resistant coating	All liquids	EPA SPCC / SASO	Emergency drain blocking — fast deploy in loading bays, plant areas
Magnetic Drain Cover — Round	300mm / 450mm / 600mm dia	Neoprene seal, neodymium magnet array	All liquids	EPA SPCC	Metal-surround drains in workshops, plants, chemical areas
Inflatable Pipe Plug — 50mm–75mm	50–75mm pipe diameter	Rubber inflatable bladder, nylon fabric	Liquid and gas (low-pressure sealing)	EN 1610 / ASTM	Emergency pipe sealing, drain inlet blocking at plant
Inflatable Pipe Plug — 150mm–300mm	150–300mm pipe diameter	Rubber inflatable bladder, polyester fabric reinforced	Liquid sealing, hazmat containment	EN 1610	Storm drain blocking, large pipe emergency sealing at KSA sites
Hazardous Waste Disposal Bags — Yellow HDPE	90L capacity; box of 50	Heavy-duty HDPE, UN-rated	Chemical / hazmat waste	UN packaging / SASO	Disposal of used absorbent pads and chemical waste at KSA facilities
Spill Response Trolley — Wheeled	120L capacity; 4-wheel trolley	HDPE drum on steel trolley frame	All liquid types	EPA SPCC / SASO	Rapid deployment in large Saudi Arabia plants and refinery aprons
Portable Sump Pump — SS 316 Wetted Parts	Flow: 30–80 L/min; head: 6m max	SS 316 pump casing and shaft, EPDM seal	Chemical, acids (pH 3–10), water-based	SASO / ATEX Zone 2 option	Pumping spilled liquids from bunds, sumps, and tanks
Oil-Water Separator Sock — Storm Drain	100mm–300mm drain insert; 0.5m depth	Hydrophobic PP insert in HDPE housing	Oils, hydrocarbons (passes water)	SASO / EPA storm water	Outdoor plant and refinery storm drains — continuous hydrocarbon protection

Spill Control & Containment Supplier Saudi Arabia — Spill Kits, Absorbents & Secondary Containment In Stock

Product Types in Stock

Universal Spill Kits

Chemical (Hazchem) Spill Kits

Absorbent Pads, Rolls & Socks

Secondary Containment Bunds

Drain Covers & Plug Kits

Spill Response & Cleanup Accessories

Complete Spill Control & Containment Range — 28+ Products

Why Industrial Buyers in Saudi Arabia Choose Gulf Union Ozone for Spill Control

Local Stock — Same-Day Dispatch

Compliance Documentation Ready

ISO 9001:2015 Certified Quality

Nationwide KSA Delivery

Also Stocked at Gulf Union Ozone

Site Safety PPE

Industrial Chemicals

Fire Fighting Equipment

Safety Signs & Labels

Request a Spill Control & Containment Quotation