Laundry Machines & Parts — Saudi Arabia

Laundry Machines & Parts Supplier Saudi Arabia — Commercial & Industrial Grade

Gulf Union Ozone Trading Co. supplies commercial laundry machines, steam valves, steam traps, dryer parts, and complete laundry system accessories to hotels, hospitals, uniform services, and industrial laundries across Saudi Arabia. Our Jeddah warehouse holds safety stock of washer-extractors, tumble dryers, flatwork ironers, condensate pumps, steam trap assemblies, and critical spare parts. All items are ISO 9001:2015 certified (CR 4030570569) and shipped with full documentation including MTCs and Certificates of Conformance.

Submit RFQ
Commercial laundry machines and steam parts stocked in Saudi Arabia — Gulf Union Ozone
Product Categories

Product Types in Stock

Gulf Union Ozone covers the full scope of commercial and industrial laundry equipment — from complete washing machines and dryers to individual steam system components, mechanical spare parts, and control instrumentation.

Type 01

Washing Machines & Dryers

Front-load washer-extractors from 10 to 120 kg capacity to ISO 10472 and EN 60335-2-7. Gas-fired and electric tumble dryers from 10 to 75 kg to EN 60335-2-11. Industrial tunnel washers (continuous batch washers) rated 50–500 kg/hr. Washer-disinfectors to EN ISO 15883-1 for hospital and medical linen. All machines feature SS 304 or SS 316L drums with CE marking and full wiring diagrams.

Type 02

Steam Traps & Steam Valves

Float & Thermostatic, Thermodynamic, Bimetallic, and Inverted Bucket steam traps to BS EN ISO 6553 / EN 26842 in DN10–DN50, PN16–PN40. Steam globe, gate, ball, and solenoid valves to ASME B16.34 / BS 1873 in carbon steel WCB and stainless steel CF8M. Pressure reducing valves (PRVs) to BS EN ISO 4126-1. Safety relief valves to ASME Section VIII, API 520. All steam items tested hydrostatically before dispatch.

Type 03

Pumps, Filters & Water Treatment

Condensate return pumps (centrifugal, electric) to EN 733 / ISO 2858 in CI and SS 316, rated 2–50 m³/hr. Hot water circulation pumps DN32–DN150. Chemical dosing pumps (diaphragm, peristaltic) to ISO 15783, SS 316 / PVDF wetted parts. Y-strainers and basket strainers to ASME B16.34 / BS 1904. Cartridge filter housings, lint trap assemblies, water softener resin vessels to ASME Section VIII. Reverse osmosis units for wash water pre-treatment.

Type 04

Mechanical Spares & Electrical Parts

Deep groove ball bearings and cylindrical roller bearings to ISO 15 / DIN 625 for drum shafts. V-belts to ISO 4184 / DIN 2215 in classical and narrow profiles (A, B, C, SPA, SPB). Timing belts to ISO 5296-1. Mechanical seals to ISO 3069 with carbon/SiC faces. Drum paddles (PP / SS 304), door gaskets (EPDM), shock absorbers, suspension springs. IE3 efficiency 3-phase motors to IEC 60034-1. PLC control modules, water level sensors, and solenoid fill valves to IEC 60730.

Product Catalog

Complete Laundry Machines & Parts Range — 60+ Products

Technically accurate specifications referencing ASME, ISO, EN, IEC, DIN, BS, and API standards. All items available for supply from Jeddah, Saudi Arabia with ISO 9001:2015 documentation.

Product Standard / Spec Material Size Range Application
Front-Load Washer-Extractor ISO 10472, EN 60335-2-7, CE SS 304 drum, painted steel frame 10–120 kg capacity Hotel, hospital, industrial laundry
Industrial Tunnel Washer (Continuous Batch) ISO 10472, CE, UL listed SS 304 / SS 316L interior, epoxy-coated frame 50–600 kg/hr throughput Large-scale industrial laundry plants
Washer-Disinfector (Thermal Disinfection) EN ISO 15883-1, HTM 01-04, CE SS 316L chamber and drum 10–50 kg per cycle Hospital, medical, food-service linen
Centrifugal Extractor (Hydro-Extractor) EN 60335-2-7, IEC 61439, CE SS 304 basket, mild steel frame 20–100 kg, 800–1000 RPM Pre-drying water extraction from laundered items
Gas-Fired Tumble Dryer EN 60335-2-11, NFPA 54, CE SS 304 drum, galvanized cabinet 10–75 kg capacity Commercial linen drying, hotel, hospital
Electric Tumble Dryer (3-phase) IEC 60335-2-11, CE, SASO SS 304 drum, painted steel 10–50 kg capacity, 380 V / 50 Hz Hotel, guesthouse, small commercial laundry
Steam-Heated Tumble Dryer EN 60335-2-11, ASME B31.1, CE SS 304 drum, finned steam coil 25–100 kg, steam pressure 4–8 bar Industrial laundries with central steam plant
Flatwork Ironer / Calender (roll type) EN 60335-2-44, ISO 10472, CE Chrome-plated cast iron rolls, SS chest 1200–3600 mm roll width, 320–500 mm dia. Sheet, pillowcase, tablecloth finishing
Steam Chest Press (shirt / garment) CE, ASME, EN 60335-2-85 Aluminum alloy platens, SS steam manifold Standard shirt / jacket sizes Shirt, uniform, jacket finishing
Tunnel Finisher / Form Finisher CE, EN 60335-2-85, ISO 10472 SS 304 cabinet, SS steam nozzles 200–500 garments/hr throughput Garment finishing without pressing, uniform service
Float & Thermostatic Steam Trap (FT type) BS EN ISO 6553, EN 26842, DIN 3229 SG iron body / SS 316 internals DN15–DN50, PN16 / PN40 Dryer steam coil drainage, jacketed vessels
Thermodynamic Steam Trap (disc type) BS EN ISO 6553, EN 26842 SS 316 body and disc DN15–DN25, PN40 Steam mains drainage, high-pressure steam headers
Bimetallic Steam Trap BS EN ISO 6553, EN 26842 SS 316 body and bimetallic element DN15–DN50, PN16–PN40 Low-pressure steam coil heating, jacketed pans
Inverted Bucket Steam Trap BS EN ISO 6553, EN 26842, ASME B16.34 Cast iron body / SS 316 internals DN15–DN50, PN40 High-pressure steam lines, dryer cylinders
Balanced Pressure Thermostatic Steam Trap BS EN ISO 6553, EN 26842 SS 316 body, phosphor bronze capsule DN10–DN40, PN16 Low-pressure steam heating coils, heat exchangers
Steam Trap Station (manifold with isolation valves) ASME B31.1, BS EN ISO 6553 Carbon steel / SS 316 manifold DN15–DN50, PN40 Steam trap grouping, maintenance-friendly installation
Steam Globe Valve (bolted bonnet, rising stem) ASME B16.34, BS 1873, API 602 WCB / CF8M body, SS 316 trim DN15–DN200, Class 150–600 Steam throttling and isolation, dryer steam supply
Steam Gate Valve (OS&Y, rising stem) ASME B16.34, BS 1414, DIN 3352 WCB body, SS 316 stem and wedge DN25–DN300, Class 150–600 Steam main isolation, boiler house pipework
Steam Ball Valve (full bore, SS body) API 6D, BS 5351, ASME B16.34 CF8M / SS 316 body and ball, PTFE seats DN15–DN150, Class 150–300 Steam and condensate isolation in laundry plant
Steam Butterfly Valve (high-performance, triple-offset) EN 593, API 609, ASME B16.34 WCB body, CF8M disc, stellite seat DN50–DN600, PN16 / PN25 Large steam headers, distribution to multiple dryers
Steam Pressure Reducing Valve (PRV, direct-acting) BS EN ISO 4126-1, ASME B31.1, PED 2014/68/EU WCB / SS 316 body, SS internals DN15–DN100, up to 14 bar inlet Reducing boiler steam pressure for laundry equipment
Steam Safety Relief Valve (spring-loaded) ASME Section VIII Div.1, API 520 / API 521 SS 316 / WCB body, SS nozzle & disc DN15–DN100, set pressure 1–25 bar Pressure vessel and steam header overpressure protection
Steam Solenoid Valve (2/2-way, normally closed) IEC 60730, EN 161, CE, UL 429 SS 304 body, SS 316 core tube, PTFE seal DN10–DN50, PN16, 24 VDC / 230 VAC coil Automated steam supply/cut-off on dryers and presses
Steam Control Valve (pneumatic actuated, globe type) ISA-75.01.01, IEC 60534-2, ASME B16.34 CF8M trim, WCB / CF8M body DN15–DN200, Class 150–600 Automated steam temperature and pressure control
Steam Swing Check Valve API 594, ASME B16.34, BS 1868 WCB body, SS 316 disc and hinge DN25–DN300, Class 150–600 Backflow prevention in steam distribution mains
Condensate Check Valve (piston / lift type) ASME B16.34, BS 5153 SS 316 body, piston and spring DN15–DN80, Class 800 Condensate return line backflow prevention
Condensate Return Pump (electric, centrifugal) EN 733, ISO 2858, IEC 60034 Cast iron / SS 316 casing and impeller 2–50 m³/hr, 10–60 m head Hot condensate collection and return to boiler
Hot Water Circulation Pump (in-line, centrifugal) EN 733, EN ISO 2858, IEC 60034 Cast iron / SS 316 body DN32–DN150, up to 100°C service Hot wash water circulation in laundry plant
Chemical Dosing Pump (diaphragm, motor-driven) ISO 15783, ATEX II 2G, CE SS 316 / PVDF liquid end, PTFE diaphragm 0.5–100 L/hr, up to 10 bar discharge Detergent, softener, bleach dosing in washers
Drainage / Effluent Pump (submersible) IEC 60034, CE, EN 60335-2-41 Cast iron / SS 304 casing 5–100 m³/hr, DN40–DN150 discharge Washer drain, collection pit, effluent transfer
Y-Strainer (steam and hot water service) ASME B16.34, BS 1904, DIN 86501 WCB / SS 316 body, SS 316 screen DN15–DN200, PN40; screen mesh 50–500 µm Upstream protection of steam traps and control valves
Basket Strainer (duplex, switchable) ASME B16.34, PED 2014/68/EU SS 316 body and basket DN25–DN300, PN16–PN40 Continuous operation water filtration without shutdown
Lint Trap Filter Housing (washer drain) ISO 9001:2015, CE SS 304 housing and basket DN50–DN100 inlet/outlet Lint capture on washer drain to protect sewer
Cartridge Filter Housing (10" / 20" Big Blue) ASME Section VIII, NSF/ANSI 61, CE SS 316L housing, polypropylene head 5–50 GPM, 1–50 µm cartridge Pre-treatment water filtration before softener or RO
Magnetic Pipeline Filter (in-line) ISO 9001:2015, CE, PED SS 316 body, neodymium magnet core DN15–DN100, PN16 Ferrous particle removal protecting pumps and valves
Lint Collector / Exhaust Duct Filter (dryer) ISO 9001:2015, CE, EN 13501-1 SS 304 / aluminum frame, SS woven mesh 200–600 mm duct diameter Dryer exhaust lint capture to prevent fire hazard
Water Softener — Ion Exchange Resin Vessel ASME Section VIII, NSF/ANSI 61, ISO 9001 FRP / SS 304 pressure vessel 200–3000 L resin, 0.5–20 m³/hr flow Ion exchange hardness removal for wash water
Reverse Osmosis Unit (membrane system) ISO 9001:2015, CE, NSF/ANSI 58 SS 316 frame, FilmTec / Hydranautics membranes 500–5000 L/hr permeate High-purity water for specialist laundry washing
Chemical Dosing Tank with Agitator ISO 9001:2015, CE HDPE / SS 304 tank, PP agitator 20–500 L capacity Chemical preparation and dosing for wash programmes
Steam Pressure Gauge (Bourdon tube, glycerin-filled) EN 837-1, ASME B40.100 SS 316 Bourdon tube, SS case 0–16 bar; 63 mm or 100 mm dial Local steam line and vessel pressure indication
Bimetallic Thermometer (stem type) EN 13190, ASME B40.200 SS 304 stem and case 0–200°C; 63 mm or 100 mm dial Local steam and hot water temperature indication
Pressure Transmitter (4–20 mA, 2-wire) IEC 61511, ATEX II 2G Ex ia, CE SS 316L wetted diaphragm 0–25 bar, 4–20 mA output PLC-based steam pressure monitoring and control
RTD Temperature Sensor with Thermowell (Pt100) IEC 60751, DIN 43760, EN 60584 SS 316 thermowell, Pt100 element -50 to +300°C, DIN B accuracy Steam and process temperature measurement for PLC
Steam Flow Meter (vortex shedding type) ISO 5167, ASME MFC-3M, CE SS 316 wetted parts, flanged body DN25–DN200, up to 350°C / 40 bar Saturated / superheated steam consumption metering
Condensate Separator (inline moisture separator) ASME Section VIII, ASME B31.1 Carbon steel / SS 304 DN25–DN150, PN16–PN40 Removing entrained moisture from steam supply lines
Steam Header / Distribution Manifold ASME B31.1, ASME B16.11, EN 13480 Carbon steel (A106 Gr.B) / SS 316 DN50–DN200 header, PN40 Distributing steam to multiple dryers and presses
Steam Pipe Insulation Section (pre-formed) ASTM C547, BS EN 14303, ISO 10456 Mineral wool / calcium silicate, Al jacketing DN15–DN300, up to 650°C service temp. Steam pipe heat retention, personnel protection
V-Belt Drive — Classical / Narrow Section ISO 4184, DIN 2215, BS 3790 Rubber compound, polyester cord reinforcement Sections A, B, C, D / SPA, SPB, SPC Washer/dryer drum drive, motor-to-pulley power transmission
Synchronous Timing Belt (toothed drive) ISO 5296-1, DIN 7721, RMA IP-24 Neoprene / polyurethane, fiberglass cord Pitches T5, T10, AT10, HTD 5M, 8M, 14M Synchronous drum drive, no-slip positioning in washers
Deep Groove Ball Bearing (single row) ISO 15:2017, DIN 625, ABEC-3 / P6 Chrome steel 52100 / SS AISI 440C 6200–6320 series, bore 10–100 mm Drum shaft and motor bearings in washers and dryers
Cylindrical Roller Bearing (single row) ISO 15:2017, DIN 5412, ABEC-3 / P6 100Cr6 chrome steel, brass or steel cage NU 200–NU 320 series High-radial-load drum shaft support bearings
Mechanical Seal (single, unbalanced, spring-loaded) ISO 3069, EN 12756, API 682 Carbon / Silicon Carbide faces, SS 316 hardware DN15–DN80 shaft diameter Pump shaft sealing in hot water and condensate pumps
Drive Pulley / V-Belt Sheave (cast iron) ISO 4183, DIN 2211, BS 3790 Grey cast iron GG25 / GG20 OD 100–500 mm, 1–8 grooves Motor and drum shaft V-belt drive system
Drum Paddle / Lifter (washer/dryer internal) ISO 9001:2015, CE Polypropylene (PP) or SS 304 Standard sizes for 20–120 kg machines Linen tumbling and mechanical action inside drum
Door Gasket / Drum Seal (EPDM, front-load washer) ISO 1629, ISO 9001:2015, CE EPDM rubber, chemical-resistant formulation OD 400–700 mm, fits 10–120 kg machines Water-tight door seal preventing leakage in operation
Shock Absorber / Vibration Damper (drum suspension) ISO 9001:2015, CE, DIN 74363 Steel body, NBR / EPDM rubber friction pad 300–600 N load rating, 60–120 mm stroke Drum suspension and vibration damping in washers
Drum Suspension Spring (coil, front-load washer) ISO 2162, DIN 2098, EN 10270-1 High-carbon spring steel, zinc-plated Stiffness 3–20 N/mm, wire dia. 4–8 mm Upper drum suspension in front-load washer frames
3-Phase Induction Motor — IE3 Premium Efficiency IEC 60034-1, IEC 60034-30-1, NEMA MG-1 IP55 aluminum / cast iron frame 0.37–22 kW; B3, B5, B14 mounting Drum drive motor in washers, dryers, and extractor
Motor Contactor (IEC, AC3 duty) IEC 60947-4-1, UL 508, CE Thermoplastic housing, silver alloy contacts AC3 9–95 A, coil 24 VDC or 230 VAC Motor starting, stopping, and reversing control
PLC Control Module (washer/dryer programmable) IEC 61131-3, CE, UL 508A Electronic, DIN rail mount, IP20 housing Modular I/O; 24 VDC supply Wash programme automation and cycle control
Water Level Sensor / Pressure Switch (tub pressure) IEC 60947-5-1, CE, EN 60730 PP / brass housing, diaphragm actuated 0–1 bar gauge, 1/8" BSP connection Water level control in washer tub via air dome tube
Water Fill Solenoid Valve (2/2-way, NC) IEC 60730, EN 161, CE, NSF/ANSI 61 Brass / SS 304 body, NBR seal DN15–DN25, PN10; 24 VDC / 230 VAC Cold and hot water fill control in washer tub
Immersion Heating Element (tubular, electric) IEC 60335-2-73, ASME, UL 499 Incoloy 800 / SS 316 sheath 1–15 kW; DN15 / DN25 flange mount Direct electric water heating in washer tub or vessel
Steam Heating Coil (finned, laundry vessel) ASME Section VIII, EN 13445, BS PD 5500 SS 316L tube, SS 304 fins and headers 2–50 kW heat output; steam 4–8 bar Indirect steam heating of wash water in laundry vessel
Door Safety Interlock Switch (washer lid lock) IEC 60947-5-1, EN 60335-1, CE Thermoplastic housing, stainless contacts 250 VAC / 6 A rated, IP40 Washer door locked/unlocked safety interlock circuit
Variable Frequency Drive / Inverter (drum speed) IEC 61800-5-1, IEC 61800-3, CE, UL 508C IP20 / IP54 enclosure, aluminum heatsink 0.37–22 kW, 380–480 V / 3-phase Variable drum speed from wash to extract in washers
Thermal Overload Relay (motor protection) IEC 60947-4-1, UL 508, CE Thermoplastic, bimetallic trip element 0.1–630 A adjustable range Motor overcurrent protection in laundry machine panels
Soap / Detergent Dispenser (multi-compartment, pneumatic) ISO 9001:2015, CE, EN 60335-1 SS 304 / PP housing, EPDM valves 3–6 product compartments, 24 VDC Automatic liquid detergent, softener, bleach dispensing
Linen Cart / Transport Trolley (mesh or solid-sided) ISO 9001:2015, EN 1089-3, CE SS 304 or galvanized steel frame, polyamide casters 100–300 kg load capacity, 60–200 L Soiled and clean linen transport within laundry facility
Technical Specifications

Key Standards & Material Grades

All laundry equipment and components are selected to internationally recognised standards. Documentation packages include MTCs, CoCs, dimensional reports, and test certificates as applicable.

Steam System Components

Parameter Specification
Steam trap standard BS EN ISO 6553 / EN 26842
Valve design pressure class ASME Class 150 / 300 / 600
Valve face-to-face dimensions ASME B16.10 / EN 558
PRV / SRV design BS EN ISO 4126-1 / ASME Section VIII
Hydrostatic test pressure 1.5 × rated pressure per API 598
Preferred body material (steam) ASTM A216 WCB / ASTM A351 CF8M
Max. steam temperature (SS valves) 425°C (saturated / superheated)

Washing Machine & Dryer Standards

Equipment Type Standard
Washer-extractor safety EN 60335-2-7 / IEC 60335-2-7
Commercial laundry safety ISO 10472 (Parts 1–6)
Tumble dryer safety EN 60335-2-11 / IEC 60335-2-11
Washer-disinfector performance EN ISO 15883-1 / HTM 01-04
Flatwork ironer safety EN 60335-2-44 / ISO 10472-4
Drum material (standard) AISI 304 / AISI 316L stainless
EMC / electrical marking CE (2014/30/EU + 2014/35/EU)

Certifications Held by Gulf Union Ozone

Certification Detail
ISO 9001:2015 Quality Management System, CR 4030570569
EN 10204 3.1 MTCs Material Test Certificates, mill-traceable
CoC + Dimensional CoC and dimensional reports issued per order
Why Choose Us

Why Industrial Buyers in Saudi Arabia Choose Gulf Union Ozone

From hotels in Riyadh to hospital laundries in Jeddah and industrial uniform services in Jubail — Gulf Union Ozone delivers laundry equipment and parts with documentation, speed, and local support.

⚡

Local Stock — Same-Day Dispatch

Jeddah warehouse holds safety stock of steam traps, valves, bearings, belts, seals, and laundry machine spare parts. In-stock items can be dispatched the same day an order is confirmed, cutting lead time compared to overseas procurement.

📄

Documentation Ready to Ship

Every shipment includes EN 10204 3.1 Material Test Certificates, Certificates of Conformance, dimensional inspection reports, and packing lists with full batch and lot traceability. Calibration certificates for instrumentation items available on request.

🏅

ISO 9001:2015 Documented Quality

Gulf Union Ozone is ISO 9001:2015 certified (CR 4030570569). Our quality management system covers incoming inspection, MTC verification, storage, and final dispatch checks. Spot-check dimensional and hardness testing available for critical parts.

🗺

Nationwide KSA Delivery

We deliver to all 13 Saudi regions: Al Jubail, Yanbu, Ras Tanura, Riyadh, Dammam, Khobar, Abha, Taif, Madinah, Makkah, Tabuk, Qassim, and Jizan. Freight-forwarding coordination available for urgent or oversized laundry equipment.

Related Categories

Related Products & Categories

Gulf Union Ozone supplies complementary industrial categories for plant maintenance, utilities, and mechanical systems across Saudi Arabia.

Category

Industrial Valves

Ball valves, gate valves, butterfly valves, globe valves, and check valves. ASME B16.34 rated. Carbon steel and stainless steel. SAEP-347 compatible stock.
Category

Pipe Fittings

Elbows, tees, reducers, unions, and couplings. Butt-weld and socket-weld to ASME B16.9 / ASME B16.11. Carbon steel, stainless steel 304 / 316L.
Category

Water Pumps

Centrifugal, submersible, booster, and fire pump sets. EN 733 / ISO 2858 rated. Cast iron and SS 316 impellers. For water supply, drainage, and circulation applications.
Services

Supply Capabilities

Full documentation packages, expediting, freight forwarding, and local sourcing. ISO 9001:2015 quality management. Same-day dispatch from Jeddah warehouse for stocked items.
Request a Quote

Request a Laundry Machines & Parts Quotation

To receive a quotation, please share your equipment model, required part numbers or specifications, quantity, and required delivery location in Saudi Arabia. For steam system components include nominal pipe size, pressure rating, and material class. We respond to all RFQs within one business day.

Email Your RFQ Submit RFQ Form

CR 4030570569 | ISO 9001:2015 | Jeddah, Saudi Arabia

Inventory updated: August 2026

In Summary

Gulf Union Ozone Trading Co. supplies Commercial & Industrial Laundry Machines to industrial customers across Saudi Arabia with delivery from our Jeddah warehouse — serving oil field camps, contractor yards, industrial facilities, and government projects.

In Summary

Commercial & Industrial Laundry Machines from Gulf Union Ozone serves Saudi Aramco contractor camps, SABIC, SADARA, SEC utilities, NEOM construction sites, and major industrial facilities requiring reliable supply with fast delivery across the Kingdom.

In Summary

Gulf Union Ozone stocks a wide range of Commercial & Industrial Laundry Machines — contact us for immediate availability confirmation and a competitive quotation with delivery to your project location.

In Summary

For urgent Commercial & Industrial Laundry Machines procurement in Saudi Arabia, WhatsApp +966 55 098 8062 — our team confirms stock availability within the hour and provides competitive quotations with delivery to all Saudi cities and industrial zones.