Coolers — Saudi Arabia

Coolers Supplier Saudi Arabia — Evaporative, Refrigeration & Cooling Tower

Gulf Union Ozone Trading Co. supplies industrial evaporative air coolers, cooling tower fill and components, refrigeration condensing units, heat exchangers, and refrigeration monitoring instruments from our Jeddah warehouse. Our cooling product range supports manufacturing plants, food processing facilities, cold chain logistics, HVAC contractors, and industrial facilities across Saudi Arabia. ISO 9001:2015 certified (CR 4030570569). Full documentation including Certificates of Conformance, data sheets, and dimensional reports supplied with every order. Same-day dispatch for in-stock items.

Submit RFQ
Industrial evaporative air coolers and cooling tower components stocked in Saudi Arabia — Gulf Union Ozone
Cooling Equipment Categories

Product Types in Stock

From evaporative media pads to refrigeration controllers, Gulf Union Ozone covers the full spectrum of industrial cooling equipment for Saudi Arabia's industrial and commercial sectors.

Type 01

Evaporative Air Coolers

Direct and indirect evaporative air coolers for industrial workshops, warehouses, and open production areas. Airflow range 5,000–60,000 m³/h. Units conform to IEC 60335-2-98 and ASHRAE 55 thermal comfort standards. Bodies in galvanised steel, powder-coated carbon steel, or polypropylene. Includes cellulose 7090 and 5090 cooling media, rigid cross-fluted PVC media, distribution manifolds, float valves, circulation pumps, and replacement fan blades. Cooling efficiency 70–95% depending on media depth and inlet air conditions.

Type 02

Cooling Tower Components

Complete range of cooling tower internals and replacement parts: induced-draft and cross-flow FRP tower shells, PVC S-wave and XF-19060 cross-corrugated fill media, PVC drift eliminators to CTI STD-140, full-cone spray nozzles, FRP fan blades, gear reducers to AGMA 6013, TEFC motors to IEC 60034, basin strainers in SS 304/316, blowdown conductivity controllers, chemical dosing pumps, and electric basin anti-freeze heaters. All fill media rated to BS 4485 and CTI STD-136.

Type 03

Industrial Refrigeration Units

Air-cooled and water-cooled condensing units from 2 kW to 500 kW; hermetic, semi-hermetic, scroll, and screw compressor configurations. Refrigerants: R-404A, R-448A, R-449A, R-507A, R-134a, R-407C. Units comply with EN 378 (safety and environmental) and ASHRAE 15. Cold room evaporators (unit coolers) for positive and negative temperature applications. Shell-and-tube and plate heat exchangers for chilled water systems. Full CE marking and pressure vessel certification per PED 2014/68/EU.

Type 04

Heat Exchangers & Coils

Shell-and-tube heat exchangers to TEMA C/R/B and ASME Section VIII Div. 1; gasketed and brazed plate heat exchangers; direct-expansion (DX) coils; chilled-water coils to AHRI 410; condenser coils and microchannel coils for air-cooled condensing units; evaporator fin-and-tube coils to AHRI 420. Materials: carbon steel, SS 304, SS 316L, copper, titanium. Working pressures up to 45 bar. Custom face areas and row configurations available.

Type 05

Refrigeration Controls & Monitoring

Full range of refrigeration monitoring and control instruments: digital microprocessor controllers to IEC 61010-1, electronic expansion valves (EEV), pressure transmitters to IEC 61326-1, refrigerant leak detectors to EN 14624, suction and discharge pressure gauges to EN 837-1, thermostatic expansion valves (TXV), solenoid valves (UL 429 / EN 161), filter driers, sight glasses with moisture indicators, oil separators, liquid receivers, suction line accumulators, and pressure relief valves per ASME Section VIII UG-125.

Type 06

Cooling System Accessories

Supporting components for cooling and refrigeration systems: vibration isolators (spring and rubber anti-vibration mounts to ISO 10816), water flow switches (SPDT, paddle type, SS 304 wetted parts), fan coil units (ceiling cassette and ducted type), package rooftop air conditioners (ASHRAE 90.1), cooling tower water treatment dosing systems, conductivity-based blowdown controllers, chemical metering pumps in PVDF and SS 316, and basin level control assemblies. All accessories supplied with manufacturer data sheets and conformance documentation.

Product Catalog

Complete Coolers Range — 57 Products

All products stocked in Jeddah, Saudi Arabia. Full Certificates of Conformance, data sheets, and dimensional reports available. Submit an RFQ for pricing and lead times.

Product Standard / Spec Material Size Range Application
Direct Evaporative Air Cooler (Industrial) IEC 60335-2-98 / ASHRAE 55 Galvanised Steel / PP Frame 5,000–60,000 m³/h Industrial workshops, warehouses, factories
Indirect Evaporative Air Cooler ASHRAE 90.1 / EN 13053 Aluminium / SS 304 Heat Exchanger 10,000–80,000 m³/h Food processing, pharmaceutical, clean rooms
Two-Stage Evaporative Cooler ASHRAE 55 / ISO 7547 Galvanised Steel / Aluminium Fins 8,000–50,000 m³/h High ambient temp zones, telecom shelters
Portable Evaporative Cooler IEC 60335-2-98 ABS / Galvanised Steel 1,500–8,000 m³/h Spot cooling, construction sites, event spaces
Rooftop Evaporative Cooler (Downdraft) IEC 60335-2-98 / UL 507 Galvanised Steel / Powder-Coated 6,000–40,000 m³/h Commercial buildings, sports halls, mosques
Cellulose Evaporative Cooling Pad — 7090 ASHRAE 51 / ANSI/AMCA 210 Cross-fluted Cellulose (70°/90°) 100×600–600×1800 mm, 100–200 mm deep Direct evaporative coolers, AHU pre-cooling
Cellulose Evaporative Cooling Pad — 5090 ASHRAE 51 Cross-fluted Cellulose (50°/90°) 100×300–600×1800 mm, 100 mm deep Low-static evaporative coolers, poultry houses
Rigid PVC Cooling Media — Flute 45°/45° ISO 5801 / CTI STD-136 PVC (chlorinated, fire-retardant) 300×600 mm, 150–300 mm deep Industrial evaporative coolers, AHU sections
Evaporative Cooler Distribution Manifold ISO 9001:2015 PP / ABS / UV-Stabilised Polymer DN15–DN50, custom lengths Water distribution across evaporative media
Counter-Flow FRP Cooling Tower (Induced Draft) BS 4485 / CTI STD-201 FRP Shell / PVC Fill / SS 304 Basin 10–1,000 TR HVAC, process cooling, power plants
Cross-Flow Cooling Tower (Mechanical Draft) BS 4485 / CTI STD-201 FRP / Galvanised Steel Frame 50–5,000 TR Large HVAC plants, industrial cooling loops
PVC Cooling Tower Fill Media — S-Wave CTI STD-136 / ISO 15138 PVC (self-extinguishing, FR grade) 600×1000×300 mm modules Counter-flow and cross-flow cooling towers
PVC Fill Media — XF-19060 Cross-Corrugated CTI STD-136 PVC (chlorinated) 600×1000×150–300 mm High-efficiency counter-flow towers
Drift Eliminator — PVC CTI STD-140 / BS 4485 PVC (UV-stabilised, FR) Custom panel sizes, ≤0.001% drift loss All cooling tower types, Legionella control
Cooling Tower Spray Nozzle (Full Cone) CTI STD-136 / ISO 9001 ABS / PVC (chemical resistant) DN15–DN50, 360° full cone Water distribution over fill media
Cooling Tower Fan — FRP Aerofoil Blade ISO 5801 / AMCA 210 FRP Blade / Carbon Steel Hub 1.0–6.0 m diameter, variable pitch Induced-draft cooling tower air movement
Cooling Tower Gear Reducer AGMA 6013 / CTI STD-111 Cast Iron Housing / Alloy Steel Gears 5–500 HP input, ratio 3:1–20:1 Cooling tower fan drive systems
Cooling Tower Motor — TEFC IEC 60034-1 / NEMA MG-1 Cast Iron / Aluminium Frame 0.75–200 kW, IE2/IE3 efficiency Cooling tower fan and pump drives
Cooling Tower Basin Strainer BS 5154 / ISO 9001 SS 304 / SS 316L DN50–DN200, mesh 1.6–3.2 mm Basin water filtration, debris removal
Cooling Tower Blowdown Conductivity Controller IEC 61010-1 / ISO 9001 ABS Enclosure / SS 316 Probe 0–10,000 µS/cm, relay output Automatic blowdown, cycles-of-concentration control
Cooling Tower Chemical Dosing System ISO 9001 / EN 12729 HDPE Tank / SS 316 Pump Head 10–500 L/h dosing capacity Scale & corrosion inhibition, biocide dosing
Cooling Tower Basin Electric Heater IEC 60335-2-30 / NEMA 4X Incoloy 800 / SS 316 Sheath 1–50 kW, 230 V / 415 V Basin anti-freeze protection in cold nights
Air-Cooled Condensing Unit EN 378 / ASHRAE 15 / PED 2014/68/EU Galvanised Steel Frame / Copper Coil 2–100 kW, R-404A / R-448A / R-134a Cold rooms, blast freezers, beverage cooling
Water-Cooled Condensing Unit ASHRAE 15 / EN 378 / ASME VIII Carbon Steel Frame / SS 316 HEX 10–500 kW, R-407C / R-134a Industrial refrigeration, process chilling
Hermetic Reciprocating Compressor IEC 60335-2-34 / ASHRAE 15 Cast Iron Dome / Steel Valves 0.5–7.5 HP (R-134a / R-404A) Domestic refrigerators, small cold rooms
Semi-Hermetic Reciprocating Compressor IEC 60335-2-34 / EN 378 Cast Iron Body / Steel Connecting Rods 2–50 HP (R-404A / R-448A / R-507A) Medium cold stores, food processing refrigeration
Open-Type Reciprocating Compressor ASHRAE 15 / EN 378 Cast Iron / Alloy Steel Crank 5–200 HP, belt or direct drive Large refrigeration plants, ammonia systems
Scroll Compressor Refrigeration Unit EN 378-2 / ASHRAE 15 Steel Housing / Aluminium Scrolls 1.5–30 kW (R-410A / R-407C) Light commercial refrigeration, chilled water
Screw Compressor Refrigeration Unit ASHRAE 15 / EN 378 / ASME VIII Ductile Iron / SS Rotors 50–500 kW (R-134a / R-507A) Industrial cold storage, process chilling
Ammonia Refrigeration Unit Cooler (Evaporator) IIAR 2 / ASME B31.5 / EN 378 SS 304 / Carbon Steel (NH₃ rated) 5–200 kW, −40°C to −5°C evap. Ammonia cold rooms, ice plants, frozen food
Shell & Tube Heat Exchanger (Cooling) TEMA C/R/B / ASME VIII Div.1 Carbon Steel Shell / SS 316L Tubes DN100–DN600 shell, 0.5–200 m² Process cooling, lube oil cooling, CW systems
Gasketed Plate Heat Exchanger ASME VIII / EN 14276 SS 316 / Titanium Plates, NBR/EPDM Gaskets 10–5,000 m² total area, ≤25 bar HVAC chilling, district cooling, food processing
Brazed Plate Heat Exchanger EN 14276 / PED 2014/68/EU SS 316L Plates / Copper Brazing 5–500 kW, ≤30 bar / ≤120°C Refrigeration circuits, chilled water, heat pumps
Double Pipe Heat Exchanger ASME VIII Div.1 / TEMA Carbon Steel / SS 304 Inner Pipe DN25–DN100, counter-current flow High-pressure fluid cooling, viscous products
Chilled Water Coil — Fin & Tube (Cooling Coil) AHRI 410 / ASHRAE 33 Copper Tubes / Aluminium Fins 4–8 row, custom face area AHU cooling sections, fan coil units
Direct Expansion (DX) Evaporator Coil AHRI 210/240 / ASHRAE 37 Copper Tubes / Aluminium Fins 2–8 row, 1–100 kW capacity Air conditioning, refrigerated showcases
Air-Cooled Condenser Coil (Microchannel) AHRI 460 / EN 378 Aluminium Microchannels / Fins Custom face area, 5–200 kW Air-cooled condensing units, RTUs
Ceiling Cassette Fan Coil Unit (4-Way) ISO 5151 / EN 1397 Steel Casing / Copper-Aluminium Coil 200–2,000 CFM, 2–10 kW cooling Office cooling, retail, light industrial
Digital Refrigeration Controller (Microprocessor) IEC 61010-1 / EN 60730-1 ABS Enclosure / Electronic PCB −50°C to +99°C, NTC/PTC/PT100 inputs Cold rooms, blast freezers, display cabinets
Electronic Expansion Valve (EEV) — Stepper Motor IEC 60730-1 / EN 378 Brass Body / SS 316 Needle DN6–DN35, 0–500 steps Superheat control in DX refrigeration circuits
Pressure Transmitter (Refrigerant Service) IEC 61326-1 / EN 837-1 SS 316L Wetted Parts, IP65 0–60 bar, 4–20 mA / 0–10 V output Suction & discharge pressure monitoring
Thermostatic Expansion Valve (TXV / TEV) ASHRAE 63.1 / EN 13136 Brass Body / SS Sensing Bulb DN6–DN35, internal / external equaliser Evaporator superheat control, DX systems
Refrigerant Leak Detector (Fixed, Multi-Zone) EN 14624 / IEC 60079-29-1 ABS / Electronic Electrochemical Sensor 0–1,000 ppm, 4–20 mA alarm output Compressor rooms, cold stores, plant rooms
Suction / Discharge Pressure Gauge EN 837-1 / ASME B40.100 Brass / SS 316 Bourdon Tube DN50–DN100, −1 to 30 bar dual scale Refrigerant suction & discharge line monitoring
Bulb & Capillary Thermostat (Refrigeration) EN 60730-1 / UL 873 Brass Sensing Bulb / Bakelite Housing −30°C to +30°C, SPDT switch Commercial refrigeration thermostat control
Solenoid Valve — Refrigerant Service (NC) UL 429 / EN 161 / ATEX (optional) Brass Body / NBR Seal / SS 304 Core DN6–DN50, ≤45 bar MOP Liquid line, suction line & hot gas control
Filter Drier — Core-Replaceable (Refrigerant) ASHRAE 63.2 / ARI 710 Steel Shell / Molecular Sieve & Desiccant Core DN10–DN50, ≤45 bar MWP Refrigerant moisture & acid removal, liquid line
Sight Glass with Moisture Indicator ASHRAE 63.2 / EN 378 Brass / Copper, Borosilicate Glass DN10–DN35, ≤45 bar, colour-change indicator Liquid line moisture detection, refrigerant view
Oil Separator — Refrigeration ASME VIII Div.1 / EN 378 Carbon Steel / SS 304 Internals DN25–DN100, efficiency ≥98% Compressor discharge oil separation
Liquid Receiver (High-Pressure) ASME VIII Div.1 / EN 378 Carbon Steel (SA-516 Gr.70) 5–500 L, ≤28 bar MAWP Refrigerant liquid storage after condenser
Suction Line Accumulator ASME VIII Div.1 / ASHRAE 15 Carbon Steel / SS 304 2–100 L, matched to compressor HP Liquid flood-back protection for compressors
Refrigerant Service Ball Valve (Packed) ASHRAE 15 / EN 12284 Brass / Bronze Body, PTFE Seats DN10–DN50, ≤45 bar, access port Refrigerant line isolation and servicing
Check Valve — Refrigerant Discharge Line EN 13709 / EN 378 Brass / SS 316 Spring & Disc DN10–DN50, lift check type Compressor discharge backflow prevention
Pressure Relief Valve — Refrigerant Vessel ASME VIII UG-125 / EN 4126-1 Brass / SS 316 Trim DN15–DN50, set pressure 18–32 bar Overpressure protection — receivers, vessels
Spring Vibration Isolator (Compressor Mount) ISO 10816-3 / NEMA MG-1 Steel Spring / Neoprene Cap Load 50–5,000 kg, 1 Hz nat. frequency Compressor and AHU vibration isolation
Anti-Vibration Rubber Mount (Compressor Pad) ISO 10816 / DIN 45635 Natural Rubber / Steel Insert, M10–M24 Load 20–2,000 kg per mount Hermetic and semi-hermetic compressor mounting
Water Flow Switch — Paddle Type (Cooling Loop) IEC 60947-5-1 / UL 508 SS 304 Wetted Parts, SPDT Switch DN25–DN200 pipe, 0.1–3.0 m/s flow Chiller low-flow protection, pump interlock
High/Low Pressure Switch (Refrigerant) EN 12263 / UL 984 Brass / ABS Housing, SPDT Contact LP: −0.5 to 8 bar / HP: 6 to 45 bar Compressor safety cutout on pressure limits
Hot Gas Bypass Valve ASHRAE 15 / ARI 760 Brass Body / Stainless Internals DN10–DN35, evap. pressure pilot Capacity control at low load, anti-freeze
Condenser Pressure Regulating Valve ASHRAE 15 / EN 12263 Brass / Bronze Body DN15–DN50, 5–25 bar set range Condenser pressure maintenance in winter
Discharge Muffler — Refrigerant Compressor ASHRAE 15 / ISO 9001 Carbon Steel / SS 304 DN10–DN50, gas pulsation attenuation Noise & pulsation reduction on discharge line
Flexible Braided Hose — Refrigerant Service EN 13480-3 / ASME B31.5 SS 304 Corrugated / SS 316 Braid DN10–DN50, ≤45 bar, −196°C to +300°C Vibration isolation between compressor & pipework
Refrigeration Pipe Insulation — Closed Cell ASTM C534 / EN ISO 13787 Closed-Cell Elastomeric Foam (NBR/PVC) ID 10–160 mm, 6–50 mm wall, λ ≤0.037 W/mK Suction line & chilled water pipe insulation
Evaporator Defrost Timer (Analogue) EN 60730-1 / UL 508 ABS / Polycarbonate DIN-Rail 1–6 defrost cycles/day, 1–90 min duration Cold room evaporator automatic defrost control
Fin-Row Defrost Heater — Aluminium-Sheathed IEC 60335-2-30 / UL 1995 Incoloy / Aluminium Sheath 200–2,400 W, custom length Evaporator coil electric defrost
Ambient Temperature & Humidity Transmitter IEC 61326-1 / EN 60068-2 ABS Housing / Capacitive Sensor, IP54 −40°C to +60°C / 0–100% RH, 4–20 mA Cold store monitoring, evaporative cooler control
Technical Specifications

Cooler Product Specifications & Standards

Gulf Union Ozone supplies cooling equipment built to recognised international standards for performance, safety and energy efficiency. Documentation for all listed standards is available on request.

Evaporative Cooler Performance Data

Parameter Specification
Airflow range 1,500–80,000 m³/h
Cooling media efficiency (7090) 88–95% saturation efficiency
Cooling media efficiency (5090) 75–85% saturation efficiency
Air-side pressure drop (100 mm media) 20–45 Pa at 1.5 m/s face velocity
Water flow rate per pad 0.1–0.25 L/min per 300 mm width
Motor protection class IP55 minimum (outdoor units IP65)
Design standard IEC 60335-2-98 / ASHRAE 55

Cooling Tower Fill Media Data

Property Value
Material PVC (FR-grade, self-extinguishing)
Max operating temperature 55°C continuous
Specific surface area 150–250 m²/m³
Standards CTI STD-136 / BS 4485

Refrigeration Unit Specifications

Parameter Specification
Capacity range 0.5 kW (hermetic) to 500 kW (screw)
Accepted refrigerants R-134a, R-404A, R-448A, R-449A, R-507A, R-407C, R-410A, NH₃
Evaporating temperature −45°C to +10°C
Safety standard EN 378-1/2/3/4 / ASHRAE 15
Pressure vessel certification PED 2014/68/EU / ASME VIII Div.1
Electrical supply 380–420 V / 3Ph / 50 Hz (KSA standard)
Environmental class IP54 outdoor / IP21 indoor

Standards Compliance Reference

Standard Scope
EN 378 Refrigeration safety & environmental
ASHRAE 15 Safety for refrigeration systems
CTI STD-201 / BS 4485 Cooling tower performance acceptance
AHRI 410 / 420 / 460 Cooling and heating coil ratings
ASME VIII Div.1 Unfired pressure vessels (receivers, HEX)
Why Choose Us

Why Industrial Buyers in Saudi Arabia Choose Gulf Union Ozone

⚡

Local Stock — Same-Day Dispatch

Safety stock of evaporative cooler media pads, cooling tower fill, refrigeration controls and accessories held at our Jeddah warehouse. Same-day dispatch for in-stock items. Urgent orders accepted before 14:00 AST.

📄

Documentation Ready to Ship

EN 10204 3.1 Material Test Certificates for metallic pressure components, Certificates of Conformance, dimensional inspection reports, manufacturer data sheets, and packing lists with lot and serial numbers — all prepared before dispatch.

🏅

ISO 9001:2015 Documented Quality

Gulf Union Ozone (CR 4030570569) operates a certified ISO 9001:2015 quality management system. Every cooler and refrigeration product is verified against its MTC and data sheet. Spot dimensional checks performed before dispatch on critical items.

🗺

Nationwide KSA Delivery

We deliver cooling equipment to all 18 Saudi regions — Al Jubail, Yanbu, Ras Tanura, Riyadh, Dammam, Dhahran, Jubail Industrial City, NEOM, and beyond. Freight arranged by air, road or sea for large cooling tower units.

Related Categories

Related Industrial Products

Cat 01

Valves

Ball valves, gate valves, butterfly valves and check valves in carbon steel and stainless steel. ASME rated, SAEP-347 compatible.
Cat 02

Pipe Fittings

Butt-weld and socket-weld fittings — elbows, tees, reducers, caps. ASTM A234, A403 and A420 grades. ASME B16.9 and B16.11 dimensions.
Cat 28

Water Pumps

Centrifugal, submersible and end-suction water pumps for cooling water circuits, condensate transfer, and cooling tower basin duty.
Services

Supply Capabilities

From RFQ to doorstep: documentation, inspection, expediting, packing, and KSA-wide logistics for industrial cooling and refrigeration equipment.
Get a Quote

Request a Coolers Quotation

To receive a quotation for evaporative air coolers, cooling tower components, refrigeration units or monitoring instruments, please share the product name, standard or specification, required size or capacity, quantity, and delivery location in Saudi Arabia. We will respond with pricing and lead time within one business day.

Email: info@gulfunionozone.com Submit RFQ Form

CR 4030570569 | ISO 9001:2015 | Jeddah, Saudi Arabia

Inventory updated: August 2026

In Summary

Gulf Union Ozone Trading Co. supplies Coolers to industrial customers across Saudi Arabia with delivery from our Jeddah warehouse — all products ship with original certificates and compliance documentation for Aramco, SABIC, and government projects.

In Summary

Coolers from Gulf Union Ozone serves Saudi Aramco operations, SABIC, SADARA, SEC utilities, NEOM mega-projects, and major industrial facilities across the Kingdom — our inventory covers the most common specifications and grades.

In Summary

Gulf Union Ozone stocks a comprehensive range of Coolers — contact us for immediate availability confirmation and a competitive quotation with full compliance documentation.

In Summary

For urgent Coolers procurement in Saudi Arabia, WhatsApp +966 55 098 8062 — our team confirms stock availability within the hour and provides competitive quotations for Aramco, SABIC, SEC, and government projects.