Clean Room & ESD Equipment Saudi Arabia

Clean Room & ESD Control Categories

Product Types in Stock

Gulf Union Ozone carries six cleanroom and ESD control product families to internationally recognised ISO 14644-1, IEC 61340-5-1, and ANSI/ESD S20.20 standards, with full test documentation and packing traceability for every shipment into Saudi Arabia.

Type 01

Cleanroom Coveralls & Apparel (SMS / Tyvek / Polyester)

Cleanroom coveralls in three materials for ISO 14644-1 classifications: (1) SMS polypropylene non-woven (35–60 gsm) in white, suitable for ISO Class 7–8 (Class 10,000–100,000) — one-time use; (2) DuPont Tyvek 500 and Tyvek 600 Type 5/6 for ISO Class 6–8 pharmaceutical and chemical cleanrooms with chemical splash resistance; (3) laundered polyester woven coveralls with ESD grid (carbon-fibre stripe, surface resistivity 10⁵–10⁹ Ω) for ISO Class 5–7 reusable garments in electronics assembly. Accessories: cleanroom hoods, boot covers (non-slip sole, ESD rated), sleeve covers, and face masks (Type IIR surgical, FFP2). All garments supplied in sealed bags with lot number and cleanroom packing statement.

Type 02

Cleanroom Gloves — Nitrile, Vinyl & Neoprene

Powder-free nitrile cleanroom gloves (12-inch extended cuff, AQL 1.0, EN 374 Class C) in ESD-safe formulation — surface resistivity 10⁶–10⁹ Ω, suitable for ISO Class 5–7 electronics and pharmaceutical assembly. Available in sizes XS, S, M, L, XL; 100 gloves per foil-clean bag. Powder-free vinyl (PVC) gloves for ISO Class 7–8 light-duty applications — lower cost, latex-free. Latex-free neoprene gloves for pharmaceutical solvent resistance. Double-gloving liner gloves (thin polyethylene) for thermal protection under nitrile. All gloves packed in cleanroom Class 5 environment; tested to ASTM D5250 (vinyl) and ASTM D6319 (nitrile). Silicone-free formulation available for aerospace applications.

Type 03

Cleanroom Wipes & Consumables

Polyester knit cleanroom wipes (70% polyester / 30% nylon, 150 gsm) — ultrasonically sealed or laser-cut edges, zero particle shed. Sizes: 9×9 inch and 12×12 inch, laundered and packaged in Class 5 cleanroom, 150 wipes per foil bag. Microfibre cleanroom wipes (100% polyester, 200 gsm) for ISO Class 5–6 critical wiping. Pre-saturated IPA (70% isopropanol / 30% DI water) wipes in foil-sealed individual sachets for surface decontamination. Cleanroom paper (non-particle-shedding, low-lint cellulose blend) for documentation. Tacky roller mats and replacement sheets (sticky adhesive layers, BOPP film) for cleanroom entrance zones. ESD-safe cleanroom bags — polyethylene zip-seal in antistatic pink, blue, or clear formulations.

Type 04

ESD Floor Tiles & Antistatic Floor Mats

ESD floor tiles in carbon-fibre composite (vinyl) construction — resistance 1×10⁵ to 1×10⁹ Ω (IEC 61340-4-1 / ANSI/ESD S7.1 Resistance to Ground test), suitable for full EPA flooring in electronics assembly and PCB shops. Tile size 600×600mm, thickness 3mm, snap-together interlocking system; bonded or loose-lay installation. Antistatic rubber floor mats (2-layer construction, 2mm + 3mm) — top layer 10⁶–10⁹ Ω dissipative, bottom layer conductive; with ground snap connector and 15-foot coiled ground cord. Vinyl antistatic mats (ESD table/workbench mats) in 600×900mm, 600×1200mm, and custom sizes. Antistatic floor paint (epoxy ESD coating) also available on request for concrete cleanroom floors.

Type 05

ESD Wrist Straps, Continuous Monitors & Ionizing Blowers

ESD wrist straps to IEC 61340-5-1: adjustable woven band with embedded carbon fibre, 1MΩ protection resistor, banana-plug or 4mm snap-socket ground connection. Wrist strap tester (go/no-go) for daily operator self-testing. Continuous wrist strap monitors with audible and visual alarm on open circuit or resistance out of 750kΩ–35MΩ window — DIN-rail or desktop mount. Dual-wire continuous monitoring system for simultaneous wrist strap and foot grounder monitoring. Ionizing air blowers — DC corona discharge, switchable ion balance (±2V), air volume 1.5–5 m³/min, for bench-top and over-conveyor mounting to neutralize static charge on PCBs, components, and packaging materials in Saudi Arabia EPA zones. Also available: ionizing air guns (hand-held) for local spot neutralization.

Type 06

ESD Storage Bags, Trays & Shielding Packaging

Metal-in static shielding bags (Faraday cage, pink polyethylene outer, aluminium-polyester laminate inner) — charge energy less than 35nJ per ANSI/ESD S11.31; sizes 100×150mm to 400×600mm. ESD moisture barrier bags (foil laminate) for component shipment and long-term storage with desiccant. Pink polyethylene foam sheets and rolls (surface resistivity 10⁵–10⁹ Ω) for component cushioning — sizes 25mm, 50mm, 100mm thickness. ESD conductive black polyethylene bags and tote bins (10³–10⁵ Ω) for component movement within EPA. ESD trays and matrix trays in carbon-loaded polypropylene (10³–10⁶ Ω) for component racking in SMT lines and PCB assembly in Saudi Arabia electronics facilities. ESD label tape and floor marking tape also stocked.

Product Catalog

Complete Clean Room & ESD Control Range — 28 Products

All cleanroom and ESD products supplied with relevant test documentation — IEC 61340-4-1 resistance data, IEST-RP-CC004 particle reports for wipes, EN 374 glove certificates, and ISO 9001:2015 QMS traceability (CR 4030570569).

Product	Standard / Spec	Material	Grade / Size	Application
Cleanroom Coverall — SMS, White, One-Time Use	ISO 14644-1 Class 7–8	Polypropylene SMS non-woven 45 gsm	Sizes S, M, L, XL, XXL	Pharmaceutical packaging, food processing, ISO 7–8 cleanrooms KSA
Cleanroom Coverall — Tyvek 500 (Type 5/6)	ISO 14644-1 Class 6–8 / EN 13982-1	DuPont Tyvek spunbonded polyethylene	Sizes S to XXXL	Pharmaceutical, chemical cleanrooms — chemical splash resistance
Cleanroom Coverall — Polyester ESD Grid (Reusable)	ISO 14644-1 Class 5–7 / IEC 61340-5-1	100% polyester, carbon grid stripe	Sizes S, M, L, XL; laundered 50×; 10⁵–10⁹ Ω	Electronics assembly, semiconductor, ISO Class 5–7 EPA
Cleanroom Hood — SMS, White	ISO 14644-1 Class 7–8	SMS non-woven PP	One-size-fits-all	Cleanroom headwear for food, pharma ISO Class 7–8 environments
Cleanroom Boot Cover — ESD, Non-Slip	ISO 14644-1 / IEC 61340-5-1	PP SMS top, anti-slip CPE sole	Sizes M, L, XL	Cleanroom entrance — anti-contamination, ESD shoe cover
Nitrile Gloves — 12-inch, Powder-Free, AQL 1.0	ISO 14644-1 Class 5–7 / EN 374	ESD-safe nitrile, 0.10mm, 12-inch cuff	S, M, L, XL; 100 per foil bag	Electronics, pharma, medical device assembly ISO Class 5–7 KSA
Vinyl Gloves — Powder-Free, AQL 1.5	ISO 14644-1 Class 7–8 / ASTM D5250	PVC (vinyl), 0.08mm, non-latex	S, M, L, XL; 100 per cleanroom bag	Light-duty ISO Class 7–8 cleanroom assembly, pharma packing
Neoprene Gloves — Powder-Free, Solvent Resistant	ISO 14644-1 / EN 374	Neoprene rubber, 0.30mm, 12-inch	S, M, L, XL	Pharmaceutical solvent handling, chemical cleanroom processes
Polyester Knit Cleanroom Wipe — 9×9 inch	ISO 14644-1 Class 5–7 / IEST-RP-CC004	70% polyester / 30% nylon; US edge-sealed	9×9 inch; 150 wipes per sealed bag	Critical surface wiping, IPA saturation, ISO Class 5–7 cleanrooms
Polyester Knit Cleanroom Wipe — 12×12 inch	ISO 14644-1 Class 5–7	70% polyester / 30% nylon; laser-cut	12×12 inch; 150 wipes per sealed bag	Larger surface area wiping — tables, equipment surfaces, walls
Microfibre Cleanroom Wipe — 9×9 inch	ISO 14644-1 Class 4–6	100% polyester microfibre 200 gsm	9×9 inch; 100 per vacuum-sealed bag	Ultra-critical wiping ISO Class 4–6, semiconductor, optics fab
IPA Pre-Saturated Wipes — 70% IPA / 30% DI Water	ISO 14644-1 / USP 795	Polyester wipe, 70:30 IPA blend foil pack	50 sachets per pouch	Surface decontamination, cleanroom equipment wipe-down KSA
Tacky Mat — Sticky Adhesive Entry Roller	ISO 14644-1 Class 6–8	BOPP film, 30-layer adhesive sheets	600×900mm and 900×1200mm	Cleanroom entrance contamination trap — footwear decontamination
ESD Floor Tile — Carbon Fibre Composite Vinyl	IEC 61340-4-1 / ANSI/ESD S7.1	Carbon-loaded vinyl, 3mm	600×600mm; 10⁵–10⁹ Ω RTG	Full EPA cleanroom floor, electronics assembly shop, PCB stores
Antistatic Rubber Floor Mat — 2-Layer	IEC 61340-4-1 / ANSI/ESD S7.1	Two-layer rubber: dissipative top, conductive base	600×900mm, 600×1200mm; 10⁶–10⁹ Ω	Operator workstation EPA mat, component inspection bench
ESD Workbench Mat — Vinyl, Blue or Grey	IEC 61340-4-1 / ESD S4.1	Carbon-loaded PVC, 2mm	600×900mm, 600×1200mm; 10⁶–10⁹ Ω	Electronics workbench surface ESD protection, soldering station
ESD Wrist Strap — Adjustable, 4mm Snap	IEC 61340-5-1 / ANSI/ESD S1.1	Carbon-fibre woven band, 1MΩ resistor	One size adjustable; tested 750kΩ–35MΩ	Operator grounding at EPA workstation — IEC 61340-5-1 compliant
ESD Wrist Strap Tester — Go/No-Go	ANSI/ESD S1.1	ABS enclosure, LED indicators	Tests wrist strap + person 750kΩ–35MΩ	Daily operator self-test before entering EPA — simple go/no-go
Continuous Wrist Strap Monitor — Single Wire	IEC 61340-5-1	ABS DIN-rail mount, audible + LED alarm	Window 750kΩ–35MΩ; 24VDC / 5VDC	Continuous real-time wrist strap monitoring at SMT line operators
Ionizing Air Blower — DC Fan, Bench-Top	ANSI/ESD S3.1	ABS housing, DC corona discharge	Air volume 1.5 m³/min; ±2V ion balance	Static charge neutralization on PCBs, reels, trays — bench-top KSA
Ionizing Air Blower — High Volume, Over-Conveyor	ANSI/ESD S3.1	Steel + ABS, high-output DC emitter	Air volume 5 m³/min; ±5V balance	Conveyor-mounted ionizer for SMT pick-and-place line, auto-reels
Ionizing Air Gun — Hand-Held	ANSI/ESD S3.1	ABS, compressed air operated	0.5–6 bar input; ±2V discharge	Spot neutralization — bare die handling, critical component release
ESD Shielding Bag — Metal-In, Zip-Seal	ANSI/ESD S11.31 / IEC 61340	Aluminium-polyester laminate, PE outer	Sizes 100×150mm to 400×600mm; <35nJ	PCB and component storage, inter-site shipment
ESD Moisture Barrier Bag — Foil Laminate	MIL-PRF-81705E Type I	Aluminium foil laminate, zip-seal	Sizes 150×200mm to 500×700mm	Long-term component storage with desiccant — ICs, modules, ASICs
ESD Pink PE Foam — Sheet	ANSI/ESD STM11.31	Low-density PE, pink carbon-loaded	25mm, 50mm thick; 1000×2000mm sheets	PCB and component cushioning in ESD trays and shipment boxes
ESD Conductive Black Tote Bin	IEC 61340-5-1	Carbon-loaded polypropylene PP	300×200×150mm, 400×300×200mm; 10³–10⁵ Ω	Component transport within EPA — boards, reels, WIP trays
ESD Component Tray — Matrix, Carbon PP	IEC 61340-5-1	Carbon-loaded PP; grid pockets	IC: 28-pin to 208-pin SOIC formats; 10³–10⁶ Ω	SMT line IC and chip carrier storage, rework station trays
ESD Floor Marking Tape — Yellow/Black	IEC 61340-5-1	Carbon-loaded PVC film, adhesive	50mm wide; 33m roll; 10⁶–10⁹ Ω	EPA boundary marking, workstation zoning in cleanroom shop-floor

Why Us

Why Electronics and Pharmaceutical Facilities in Saudi Arabia Choose Gulf Union Ozone for Cleanroom & ESD Supplies

⚡

ISO 14644 & IEC 61340 Compliance

Our cleanroom and ESD products are sourced and documented to ISO 14644-1 and IEC 61340-5-1 / ANSI/ESD S20.20 — the standards required for electronics manufacturing, pharmaceutical, and semiconductor EPA qualification in Saudi Arabia.

📄

Full Test Documentation

IEC 61340-4-1 resistance test data, IEST-RP-CC004 particle count reports for wipes, and EN 374 glove classification certificates supplied with every order for cleanroom and EPA audit files.

🎆

ISO 9001:2015 Certified Quality

Gulf Union Ozone is ISO 9001:2015 certified (CR 4030570569), Jeddah, Saudi Arabia — product segregation, storage, and traceability for cleanroom and ESD sensitive items.

🗺

Nationwide KSA Delivery

Same-day dispatch from Jeddah warehouse. Deliveries to Riyadh, Dammam, Jubail, Yanbu, Jizan, and all 18 Saudi regions for electronics assembly and pharmaceutical facilities.

Also Stocked at Gulf Union Ozone

MRO

Rope Access Equipment

IRATA-standard descenders, ascenders, static ropes, and rescue devices for industrial rope access in Saudi Arabia.

MRO

MRO Supplies

Industrial maintenance, repair, and operations consumables for facilities management and production support across Saudi Arabia.

Filtration

Industrial Filters

HEPA, ULPA, and industrial air filtration solutions for cleanroom make-up air units and process equipment in Saudi Arabia.

Safety

Safety Equipment

PPE, respiratory protection, gas detection, and industrial safety supplies for industrial facilities in Saudi Arabia.

FAQ

Frequently Asked Questions — Clean Room & ESD Control Equipment Saudi Arabia

What ISO cleanroom classes do your consumables and garments cover in Saudi Arabia?

Gulf Union Ozone supplies cleanroom consumables and garments rated for ISO 14644-1 Class 3 through Class 8 cleanrooms. SMS polypropylene coveralls suit ISO Class 7–8 (Class 10,000–100,000) environments such as pharmaceutical packaging, electronics assembly, and food processing in Saudi Arabia. Polyester woven cleanroom coveralls are rated ISO Class 5–7 (Class 100–10,000) for electronics manufacturing and semiconductor facilities. Tyvek Type 5/6 coveralls provide ISO Class 6–8 with chemical splash resistance for pharmaceutical and chemical cleanrooms. Nitrile gloves (12-inch cuffed, powder-free) and cleanroom wipes (polyester knit 70:30 blend, laundered) are rated ISO Class 4–6 for critical assembly. Contact us via WhatsApp 966550988062.

Do you supply IEC 61340-5-1 and ANSI/ESD S20.20 certified ESD control products in Saudi Arabia?

Yes. Gulf Union Ozone supplies a complete range of ESD control products conforming to IEC 61340-5-1 and ANSI/ESD S20.20 standards — the two internationally accepted ESD protection standards required in electronics manufacturing and PCB assembly environments. Our range includes ESD floor tiles (carbon-fibre composite, resistance 10⁵–10⁹ Ω per IEC 61340-4-1), antistatic rubber and vinyl floor mats (10⁶–10⁹ Ω), ESD wrist straps (1MΩ resistor, tested to 10⁶ Ω), continuous wrist strap monitors, and ionizing air blowers for charge neutralization on sensitive components. ESD storage bags (metal-in shielding ≤35nJ, Faraday cage), pink polyethylene foam, and ESD trays also stocked. Full documentation available for EPA (ESD Protected Area) audit.

What cleanroom wipes and gloves do you stock for electronics assembly and pharmaceutical use in Saudi Arabia?

Gulf Union Ozone stocks polyester knit cleanroom wipes (70% polyester / 30% nylon) in 9×9-inch and 12×12-inch sizes — laundered and packaged in cleanroom ISO Class 5 environment, with laser-cut or ultrasonic-sealed edges to prevent particle shedding. Microfibre wipes (100% polyester, 150–200 gsm) for ISO Class 5–6. Pre-saturated IPA wipes in foil packs also available. For gloves: 12-inch powder-free nitrile cleanroom gloves (AQL 1.0, ESD-safe formulation, Class C per EN 374) in sizes S, M, L, XL; powder-free vinyl gloves for ISO Class 7–8; and cleanroom-rated latex-free neoprene gloves. All gloves individually foil-packed for particle-controlled dispensing in Saudi Arabia semiconductor and pharmaceutical cleanrooms. Contact us at WhatsApp 966550988062 or email info@gulfunionozone.com.

Get a Quote

Request a Clean Room & ESD Equipment Quotation

To get a fast quotation, provide: ISO cleanroom class, ESD standard (IEC 61340-5-1 / ANSI/ESD S20.20), product type, quantity, and delivery location in Saudi Arabia.

WhatsApp — Cleanroom & ESD Quote Email Inquiry Submit RFQ Form

Recent Deliveries

• ESD flooring and grounding systems for an electronics assembly facility in a Jeddah industrial zone, 2025
• ISO Class 7 clean room consumables for a semiconductor testing laboratory in Riyadh, 2025
• ESD workstations, wrist straps, and anti-static packaging for a Dammam defence electronics contractor, 2025

CR 4030570569 | ISO 9001:2015 | Jeddah, Saudi Arabia — Saudi Aramco vendor compliance · SAEP-347 credentials

Clean Room & ESD Control Equipment Supplier Saudi Arabia — Coveralls, ESD Mats, Wrist Straps & Ionizers In Stock