Hazardous-Area Cable Management

Cable Glands & Conduit Systems

Gulf Union Ozone supplies a complete range of ATEX and IECEx certified cable glands, hazardous-area conduit systems, cable cleats and junction boxes for Saudi Arabia oil & gas, petrochemical, refining and industrial electrical installations. Our portfolio covers Ex d (flameproof) and Ex e (increased safety) cable glands in nickel-plated brass, 316 stainless and aluminium for Zone 1 and Zone 2 classified areas to Saudi Aramco SAES-B-006 and SAES-B-068 requirements. Armoured cable glands for SWA, DSTA and STA cables are stocked in sizes M16 to M100, rated IP66/IP68 for LV and HV power cables on Saudi industrial projects. ATEX Zone 1 and Zone 2 conduit fittings — elbows, unions, sealing fittings and male adaptors — are available in galvanised steel, aluminium and stainless steel with BSP, NPT and metric thread options. Cable cleats to IEC 61914, rated for short-circuit forces up to 63 kA peak, cover single-core and trefoil three-core HV cable runs at Saudi substation and switchgear installations. GRP and stainless ATEX junction boxes (Ex d and Ex e, 4–60 way) and full ranges of sealing accessories are stocked for same-day dispatch from Jeddah. All products carry IECEx certificates accepted as equivalent to ATEX by SASO and Saudi Aramco. ISO 9001:2015 certified, CR 4030570569.

WhatsApp for Quote Submit RFQ

ATEX IECEx cable glands conduit systems and cable cleats for hazardous area Saudi Arabia oil and gas — Gulf Union Ozone Jeddah

Cable Gland & Conduit Categories

Product Types in Stock

Gulf Union Ozone carries six hazardous-area cable management product families for Saudi Arabia oil & gas, petrochemical and industrial electrical projects, with ATEX and IECEx certification and IEC 60079-14 installation compliance documentation for every supply.

Type 01

ATEX Cable Glands

Ex d (flameproof) and Ex e (increased safety) cable glands in nickel-plated brass, stainless 316 and aluminium for Zone 1 and Zone 2 hazardous areas on Saudi Aramco and SABIC plants; IP66/IP68 rated. Thread forms include metric (M16–M100), BSP and NPT; IECEx certified for temperature classes T1–T6; cable OD ranges from 5 mm up to 68 mm; installation per IEC 60079-14.

Type 02

Armoured Cable Glands

SWA, DSTA and STA armoured cable glands in sizes M16–M100 with compression armour clamp; IP66/IP68, suitable for HV and LV power cables on Saudi industrial projects. Armour clamp grips SWA, DSTA and STA armour wires positively without cutting; inner seal and outer seal compress independently to handle wide tolerances on armoured cable sheath dimensions; earth continuity through the gland body.

Type 03

Conduit Fittings

ATEX Zone 1 and Zone 2 conduit fittings — elbows, unions, female adaptors, male adaptors and sealing fittings in galvanised steel, aluminium and stainless; BSP, NPT and metric thread options. Sealing fittings are filled with approved cable sealing compound to prevent the passage of gas and flame along the conduit; required at every entry into an Ex d or Ex e enclosure per IEC 60079-14.

Type 04

Cable Cleats

Aluminium alloy and stainless steel cable cleats for single-core and trefoil three-core HV cables; rated to IEC 61914 for short-circuit withstand on Saudi substation cable runs. Short-circuit ratings of 25 kA, 40 kA and 63 kA peak current available; trefoil formation cleats maintain correct cable geometry on 11 kV and 33 kV circuits; IEC 61914 test reports supplied with each cleat type for engineering compliance.

Type 05

Junction Boxes

GRP and stainless ATEX Zone 1/2 junction boxes with Ex d or Ex e certification; IP66/IP67; terminal block configurations 4–60 way; cable-entry options pre-drilled or with blind knockouts. GRP (glass-reinforced polyester) boxes resist Saudi Arabia coastal corrosion; stainless steel Ex d boxes for offshore and high-temperature locations; DIN-rail terminal blocks; earth bar; lid gasket inspected and replaced at every service.

Type 06

Sealing Accessories

Cable-gland sealing washers, reducer rings, lockrings, counter flanges and thread-seal PTFE tape for correct installation of cable-gland assemblies to IEC 60079-14 (electrical installations in hazardous areas). Stopping plugs in nylon and brass to close unused cable-gland entries; reducer rings to adapt large apertures to smaller cable-gland sizes; earthing lockrings to maintain electrical earth continuity between gland and enclosure.

Product Catalog

Complete Cable Glands & Conduit Range — 28+ Products

All ATEX and IECEx certified products supplied with certificates, installation datasheets and cable-gland selection data. SASO and Saudi Aramco accepted IECEx certification. ISO 9001:2015 QMS (CR 4030570569). Inventory updated: September 2026.

Product	ATEX Category	Material	Cable OD Range	IP Rating
Ex d Cable Gland — M20, Nickel-Plated Brass	II 2G Ex d IIC T6 / Zone 1 & 2	Nickel-plated brass	5–14 mm cable OD	IP66 / IP68
Ex d Cable Gland — M25, Nickel-Plated Brass	II 2G Ex d IIC T6 / Zone 1 & 2	Nickel-plated brass	9–18 mm cable OD	IP66 / IP68
Ex d Cable Gland — M32, Nickel-Plated Brass	II 2G Ex d IIC T6 / Zone 1 & 2	Nickel-plated brass	14–24 mm cable OD	IP66 / IP68
Ex d Cable Gland — M40, Nickel-Plated Brass	II 2G Ex d IIC T6 / Zone 1 & 2	Nickel-plated brass	20–32 mm cable OD	IP66 / IP68
Ex d Cable Gland — M50, Nickel-Plated Brass	II 2G Ex d IIC T6 / Zone 1 & 2	Nickel-plated brass	28–42 mm cable OD	IP66 / IP68
Ex d Cable Gland — M63–M75, Nickel-Plated Brass	II 2G Ex d IIC T6 / Zone 1 & 2	Nickel-plated brass	36–55 mm cable OD	IP66 / IP68
Ex e Cable Gland — M20–M32, SS 316	II 2G Ex e II T6 / Zone 1 & 2	Stainless steel 316	5–24 mm cable OD	IP66 / IP68
Ex e Cable Gland — M40–M50, SS 316	II 2G Ex e II T6 / Zone 1 & 2	Stainless steel 316	20–42 mm cable OD	IP66 / IP68
Ex e Cable Gland — M63–M75, SS 316	II 2G Ex e II T6 / Zone 1 & 2	Stainless steel 316	36–55 mm cable OD	IP66 / IP68
Armoured Cable Gland — SWA/DSTA, M20–M50, Brass	II 2G Ex d IIC / Zone 1 & 2	Nickel-plated brass	5–42 mm cable OD (armoured)	IP66 / IP68
Armoured Cable Gland — SWA/DSTA, M63–M100, Brass	II 2G Ex d IIC / Zone 1 & 2	Nickel-plated brass	36–68 mm cable OD (armoured)	IP66 / IP68
Armoured Cable Gland — STA, M50–M100, SS 316	II 2G Ex d IIC / Zone 1 & 2	Stainless steel 316	28–68 mm cable OD (STA armoured)	IP66 / IP68
Unarmoured Cable Gland — M16–M50, Brass (Indoor/Outdoor)	Zone 2 / Non-hazardous area	Brass or nickel-plated brass	3–40 mm cable OD	IP66
Conduit Elbow — 1/2"–2", Galvanised Steel, Zone 1/2	II 2G Ex e / Zone 1 & 2	Hot-dip galvanised steel	1/2" to 2" NPT / BSP conduit	IP54 (conduit system)
Conduit Elbow — 1/2"–2", Aluminium, Zone 1/2	II 2G Ex e / Zone 1 & 2	LM6 aluminium alloy	1/2" to 2" NPT / BSP conduit	IP54 (conduit system)
Conduit Union — 1/2"–2", Steel/Aluminium	II 2G Ex e / Zone 1 & 2	Galvanised steel or aluminium	1/2" to 2" NPT / BSP conduit	IP54 (conduit system)
Conduit Sealing Fitting — 1/2"–2", Aluminium, Zone 1/2	II 2G Ex d / Zone 1 & 2	LM6 aluminium, sealing compound included	1/2" to 2" NPT / BSP conduit	IP66 (sealed)
Conduit Male Adaptor — 1/2"–2" NPT to Metric	II 2G Ex e / Zone 1 & 2	Galvanised steel or nickel-plated brass	NPT 1/2"–2" to metric M20–M63	IP54 (conduit system)
Cable Cleat — Single-Core, Aluminium Alloy, IEC 61914	Non-hazardous / safe area substations	Aluminium alloy (LM25)	Cable OD 20–120 mm	N/A (cable cleat)
Cable Cleat — Trefoil, Aluminium Alloy, 25 kA, 11 kV	IEC 61914, rated 25 kA peak	Aluminium alloy (LM25)	Trefoil — 3× cable OD 40–85 mm	N/A (cable cleat)
Cable Cleat — Trefoil, SS 316, 63 kA, 33 kV/132 kV	IEC 61914, rated 63 kA peak	Stainless steel 316	Trefoil — 3× cable OD 60–140 mm	N/A (cable cleat)
GRP Junction Box — Ex d, 4–16 Way (Zone 1)	II 2G Ex d IIC T6 / Zone 1 & 2	GRP (glass-reinforced polyester)	Multiple cable entries, pre-drilled or blank	IP66 / IP67
GRP Junction Box — Ex e, 20–60 Way (Zone 1/2)	II 2G Ex e II T6 / Zone 1 & 2	GRP (glass-reinforced polyester)	Multiple cable entries, pre-drilled or blank	IP66 / IP67
Stainless Junction Box — Ex d, 4–24 Way (Zone 1)	II 2G Ex d IIC T6 / Zone 1	Stainless steel 316L	Multiple cable entries, pre-drilled or blank	IP66 / IP67
Stopping Plugs — M16–M75, Nylon & Brass	Zone 1 & 2 (IEC 60079-14 compliant)	Nylon PA66 or nickel-plated brass	M16, M20, M25, M32, M40, M50, M63, M75	IP66 (when fitted)
Reducer Rings — Various metric sizes	Zone 1 & 2 (IEC 60079-14)	Nickel-plated brass	M20→M16, M25→M20, M32→M25, M40→M32	IP66 (when fitted)
Earthing Lockrings — M20–M75	Zone 1 & 2 (earth continuity)	Nickel-plated brass or stainless 316	M20, M25, M32, M40, M50, M63, M75	N/A (lockring accessory)
Brass Compression Glands — Non-ATEX, Dry Indoor Areas	Non-hazardous area, indoor/dry service	Brass, unplated	Cable OD 3–52 mm; M16–M63	IP54 / IP65

Why Us

Why Saudi Arabia Electrical Teams Choose Gulf Union Ozone for Cable Glands & Conduit

⚡

ATEX Zone 1 & Zone 2 Stocked

Gulf Union Ozone holds the largest range of ATEX Ex d and Ex e cable glands in the GCC in stock at Jeddah; same-day dispatch for urgent Saudi Aramco and SABIC shutdown needs. Sizes M16–M100 in brass, stainless and aluminium available from stock without minimum order.

✅

IECEx Certified Products

All hazardous-area cable glands and junction boxes carry IECEx certificates accepted by SASO and Saudi Aramco as equivalent to ATEX for classified-area installations. Full certificate documentation and installation datasheets supplied with every order for Saudi Aramco and SABIC project compliance files.

📄

Saudi Aramco SAES Compliance

Products are selected to meet SAES-B-006 (Electrical Equipment), SAES-B-068 (Area Classification) and IEC 60079-14 (installation standard) requirements specified in Saudi Aramco engineering standards. Material certificates and ATEX/IECEx test reports supplied for each product type.

🔧

Technical Selection Support

Gulf Union Ozone provides cable-gland selection based on cable OD, armouring type, area classification and IP requirement; sizing spreadsheets and installation datasheets supplied at no charge. Cable cleat spacing calculations based on IEC 61914 and system fault level also available on request.

Also Stocked at Gulf Union Ozone

Cable Management

Cable Trays & Management Systems

Perforated, ladder and solid-bottom cable trays in galvanised steel, aluminium and fibreglass for Saudi Arabia industrial cable routing; NEMA VE 1 and IEC 61537 rated; stainless steel options for offshore and corrosive environments.

Cables

Cable Assemblies

Instrument, control, power and data cables with ATEX and IECEx certified jacket compounds for Saudi Arabia hazardous-area installations; armoured and unarmoured options; SWA and DSTA armour; BASEC, SASO and IEC 60502 certified.

Electrical

Electrical Enclosures

ATEX Zone 1 and Zone 2 GRP and stainless steel Ex d and Ex e electrical enclosures, motor control centre panels and distribution boards for Saudi Arabia oil & gas and petrochemical electrical installations; IECEx certified.

Electrical

Electric Motors

ATEX Ex d and Ex e LV and MV electric motors for Zone 1 and Zone 2 hazardous areas in Saudi Arabia; IE3 efficiency class; IEC 60034 rated; foot, flange and face-mount configurations for pump, compressor and fan drives at Saudi Aramco facilities.

Frequently Asked Questions

Cable Glands & Conduit Systems in Saudi Arabia — Common Questions

What cable gland type is required for Zone 1 hazardous areas on Saudi Aramco projects?

Saudi Aramco SAES-B-006 requires Ex d IIC (flameproof) or Ex e II (increased safety) cable glands for Zone 1 areas. Ex d glands are preferred for power cables entering junction boxes and motor terminal boxes; Ex e glands are used for instrumentation cables entering Ex e enclosures. All glands must be ATEX or IECEx certified and installed per IEC 60079-14. Gulf Union Ozone supplies glands in nickel-plated brass (for standard Zone 1 service), 316 stainless (for offshore or coastal Saudi projects) and aluminium (for weight-critical applications).

How are cable cleats rated for short-circuit withstand?

Cable cleats are tested to IEC 61914 by applying the peak short-circuit current force to the cable and cleat assembly. The cleat rating is expressed as maximum current (kA peak, e.g. 25 kA, 40 kA, 63 kA) for a specified cable spacing and number of cycles. For Saudi 33 kV or 132 kV HV cable installations, the cleat spacing and peak fault current are calculated from the system fault level; Gulf Union Ozone selects aluminium alloy or stainless steel trefoil cleats to match. IEC 61914 test reports are provided with each cleat type.

What is the difference between Ex d and Ex e cable glands?

Ex d (flameproof) glands are designed so that if an internal ignition occurs, the flame cannot propagate to the external hazardous atmosphere; they rely on long, close-tolerance flame paths in the gland body. They are mandatory for entries into Ex d enclosures (flameproof terminal boxes and junction boxes). Ex e (increased safety) glands prevent ignition by improved mechanical construction, keeping surface temperatures and sparking risk low; they are used with Ex e enclosures. Ex d glands can also be used in Ex e enclosures but not vice versa. Gulf Union Ozone's catalogue covers both types in M16–M100 metric threads.

Get a Quote

Request a Cable Glands & Conduit Quotation

To get a fast quotation, provide: product type (Ex d / Ex e / armoured / conduit fitting / cable cleat / junction box), thread size (metric / NPT / BSP), material (brass / stainless / aluminium), area classification (Zone 1 / Zone 2), cable OD or armour type, IP rating required, and delivery location in Saudi Arabia.

WhatsApp — Cable Gland Quote Email Inquiry Submit RFQ Form

Recent Deliveries

• ATEX cable gland assemblies — Saudi Aramco Abqaiq gas plant, March 2026
• Hazardous-area conduit systems — SAFCO fertiliser plant, Jubail, January 2026
• Cable cleats and conduit fittings — Ma’aden aluminium smelter, Ras Al-Khair, November 2025

CR 4030570569 | ISO 9001:2015 | Jeddah, Saudi Arabia — Saudi Aramco vendor compliance · SAEP-347 credentials

Technical content reviewed by Gulf Union Ozone's Engineering Team, Jeddah — 2026