Hand Tools & Hardware — Saudi Arabia

Hand Tools & Hardware Supplier Saudi Arabia — Spanners, Torque Wrenches & Pipe Tools In Stock

Gulf Union Ozone stocks a comprehensive range of industrial hand tools and hardware for construction, oil & gas, petrochemical, maintenance, and manufacturing operations across Saudi Arabia. Our range covers spanners and wrenches (combination, open-end, ring, adjustable, pipe, strap), torque wrenches and precision tools (click-type, dial, electronic, multipliers), pliers and gripping tools, screwdrivers and bit sets, hammers and striking tools including ATEX non-sparking copper-beryllium types for hazardous areas, and precision measuring tools (verniers, micrometers, feeler gauges, spirit levels). Chrome-vanadium and high-speed steel construction. ISO 9001:2015 certified (CR 4030570569). Same-day dispatch from our Jeddah warehouse to all KSA regions.

Submit RFQ
Industrial hand tools — spanners, torque wrenches, pipe tools and measuring instruments stocked in Jeddah Saudi Arabia — Gulf Union Ozone
Tool TypesHand · Striking · Measuring · Cutting
StandardsISO 3318 · DIN · ASME B107
MaterialsChrome-Vanadium · High-Speed Steel
DispatchSame-day from Jeddah
QualityISO 9001:2015
Hand Tools & Hardware Categories

Product Types in Stock

Gulf Union Ozone carries six core categories of industrial hand tools covering wrenching, torquing, gripping, driving, striking, and measuring requirements for Saudi Arabia oil & gas, EPC construction, and industrial maintenance sites. All tools supplied with compliance documentation and manufacturer guarantees.

Type 01

Spanners & Wrenches

Combination spanners (open-end one side, ring the other) in chrome-vanadium steel, sizes 6mm to 75mm and 1/4" to 3", individually and in sets. Open-end spanners and ring spanners — double-ended, offset ring for use in confined spaces behind flanges and pipework. Adjustable wrenches (Crescent-type) in 150mm, 200mm, 250mm, 300mm, and 450mm jaw capacities for general maintenance use. Offset ring spanners with 15° offset for better torque angle clearance on deep-set bolt heads. Pipe wrenches (Stillson-type) in cast iron jaw with serrated steel gripping jaw — 200mm to 900mm overall length for gripping and turning pipe, fittings, and round section bar. Chain pipe wrenches for grip on large-diameter pipe and cylindrical components. Strap wrenches for gripping polished surfaces, filter cartridges, and plastic pipe without surface damage. All wrenches drop-forged chrome-vanadium, hardened and tempered, with polished chrome finish.

Type 02

Torque Wrenches & Precision Tools

Click-type torque wrenches in 1/4" drive (5–25 Nm), 3/8" drive (20–110 Nm), 1/2" drive (40–210 Nm), 3/4" drive (100–600 Nm), and 1" drive (300–1,500 Nm) — all supplied with factory calibration certificates traceable to national standards. Accuracy ±4% clockwise. Dial-type torque wrenches with direct reading analogue scale for applications requiring continuous torque monitoring during tightening — 0–100 Nm to 0–3,000 Nm. Electronic digital torque wrenches with LCD display, peak-hold and track modes, audible and visual alert, and USB data output for quality records — for Saudi Aramco SAES-L-109 flange bolting compliance. Torque multipliers (planetary gear type) for high-torque flange bolting — 5:1, 10:1, and 25:1 ratios to 40,000 Nm output. Torque screwdrivers with adjustable preset clutch — 0.1 to 20 Nm range for small fastener assembly.

Type 03

Pliers & Gripping Tools

Combination pliers (linesman pliers) with wire-gripping jaws, cutter, and insulated handles — 150mm, 180mm, and 200mm lengths in drop-forged chrome-vanadium. Needle-nose pliers (long-nose) for working in confined spaces — 150mm and 200mm, straight and angled jaw versions. Circlip pliers in internal and external types for retaining ring assembly and removal on shafts and bores from 8mm to 300mm diameter — straight and angled tip, fixed and adjustable versions. Locking pliers (Mole grips / Vise-Grips) — standard jaw, long-nose, C-clamp, and chain-type in 150mm to 250mm for clamping, welding, and temporary holding. Pipe pliers (Channellock-type) with multi-position adjustment for gripping pipe, conduit, and irregular shapes. Chain pliers for large-diameter pipe and cylindrical sections. All pliers drop-forged, heat-treated, and polished-chrome finish.

Type 04

Screwdrivers & Bits

Flathead screwdrivers in SL3, SL5, SL6, SL8 tip sizes — chrome-vanadium blade with acetate or bi-material handle. Phillips screwdrivers PH1, PH2, PH3 in 100mm to 300mm blade lengths. Pozidriv screwdrivers PZ1, PZ2, PZ3 for European and metric fasteners common in Saudi Arabia industrial equipment. Torx (star) screwdrivers T10 to T50 for automotive, electrical, and precision industrial equipment. Hex (Allen) key sets in metric 1.5–19mm and imperial 1/16"–3/4" in ball-end and standard-end L-key form for socket-head cap screws. Insulated screwdrivers (1,000V VDE rated EN 60900) for electrical panel and switchgear maintenance. Impact driver sets for use with a hammer to break stubborn screws. Magnetic bit holders in 1/4" hex shank with 25mm and 50mm bits for use with power drills — bit sets in S2 steel with all drive profiles. Security (tamper-resistant) Torx, one-way, and tri-wing bit sets also stocked.

Type 05

Hammers, Chisels & Striking Tools

Ball-peen (engineer's) hammers in 225g, 450g, 675g, 900g, and 1,360g head weights — drop-forged carbon steel head, fibreglass or hickory handle for metal forming, riveting, and general engineering work. Sledgehammers in 1.8 kg, 3.6 kg, 5.4 kg, and 6.4 kg head weights with long fibreglass handles for demolition, concrete breaking, and driving stakes. Rubber mallets (dead-blow) with rubber head for assembly of pressed parts and shock-absorbing strikes without marking the work surface. Non-sparking copper-beryllium (Cu-Be) hammers — ball-peen and sledge types — for use in Zone 1 and Zone 2 hazardous areas in Saudi Arabia refineries and gas plants; supplied with material certification confirming Group IIC suitability. Cold chisels in octagonal bar stock 150mm to 300mm for concrete, brick, and metalwork cutting. Punches — centre punches, pin punches, and drift pins in chrome-vanadium for bearing fitting and alignment. Non-sparking Cu-Be chisels and punches also stocked for ATEX hazardous area use.

Type 06

Measuring & Layout Tools

Steel rules (rule steel) in 150mm, 300mm, 600mm, and 1,000mm — hardened stainless steel with metric and imperial graduations to 0.5mm resolution. Vernier calipers in 0–150mm, 0–200mm, and 0–300mm measuring range with 0.02mm vernier resolution — hardened steel jaws. Digital calipers with 0.01mm resolution, data output, and IP54 dust protection for workshop and maintenance use. Outside micrometers in 0–25mm, 25–50mm, 50–75mm, and 75–100mm ranges with 0.01mm graduation and ratchet thimble — supplied in fitted case with standard. Feeler gauges in sets of 25 blades (0.05–1.0mm) for spark plug gap, valve clearance, and coupling alignment checks. Spirit levels (vials) in 300mm, 600mm, and 1,200mm aluminium bodies with accuracy 0.5mm/m for pipework and equipment levelling. Plumb bobs in 200g, 500g, and 1,000g brass for vertical alignment and setting out. Chalk lines (chalk reels) in 30m and 50m for marking straight reference lines on structural steel and concrete.

Product Catalog

Complete Hand Tools & Hardware Range — 30+ Products

All tools supplied with manufacturer guarantees and, where applicable, calibration certificates and ATEX material certifications. ISO 9001:2015 QMS (CR 4030570569). Contact us for specific sizes and project quantities.

Product Standard / Spec Material Size / Range Application
Combination Spanner Set (Metric) ISO 3318; DIN 3113 Form B Drop-forged chrome-vanadium, chrome-plated 6–32mm (14-piece set) General mechanical maintenance — most commonly specified KSA spanner set
Open-End Spanner Set (Metric) ISO 3318; DIN 3110 Drop-forged chrome-vanadium 6–32mm (double-ended, 8-piece) Pipework and equipment assembly in confined or angled spaces
Adjustable Wrench (Crescent) ASME B107.8M; ISO 6787 Drop-forged chrome-vanadium 150 / 200 / 250 / 300 / 450mm General maintenance — one wrench fits multiple bolt sizes
Pipe Wrench — Stillson Type ASME B107.2M Malleable iron body, hardened steel jaw 200 / 300 / 350 / 450 / 600 / 900mm Gripping and turning pipe, conduit, and round section bar
Chain Pipe Wrench ASME B107.2M Alloy steel body, hardened chain Up to 200mm pipe OD Large-diameter pipe and casing gripping — drilling and pipelaying
Strap Wrench General purpose; non-marring Nylon strap, steel handle Pipe OD up to 150mm Polished pipe, filter housings, plastic fittings — no surface marking
Click-Type Torque Wrench — 1/2" Drive ISO 6789-1; ASME B107.300; ±4% CW Chrome-vanadium; calibration cert included 40–210 Nm ASME flange bolting, structural bolting, engine assembly — KSA standard
Click-Type Torque Wrench — 3/4" Drive ISO 6789-1; ±4% CW accuracy Chrome-vanadium; calibration cert included 100–600 Nm Heavy-duty flange bolting, pressure vessel studs, structural steel
Digital Electronic Torque Wrench — 1/2" Drive ISO 6789-2; ±2% CW accuracy; USB output Chrome-vanadium; peak-hold + track mode 20–200 Nm; LCD display Quality-record torque data for Saudi Aramco SAES-L-109 flange management
Torque Multiplier — Planetary Gear 10:1 ISO 6789 compatible; reaction arm included Alloy steel gears; 3/4" input, 1" output Output up to 4,000 Nm High-torque flange bolting in confined spaces where hydraulic tools cannot fit
Combination Pliers (Linesman) DIN ISO 5746; EN 60900 (insulated version) Drop-forged chrome-vanadium 150 / 180 / 200mm Wire handling, gripping, and general mechanical work
Circlip Pliers — Internal & External Set DIN ISO 5254 Chrome-vanadium, spring-loaded 8–300mm bore/shaft; straight and angled tip Bearing and seal circlip assembly on shafts and housings
Locking Pliers (Mole Grip) — Standard Jaw ISO 5746 compatible; ASME B107 Drop-forged chrome-vanadium 150 / 200 / 250mm Clamping, welding, and temporary holding in fabrication and assembly
Screwdriver Set — 6 Piece (SL + PH) DIN 5264; DIN ISO 8764 Chrome-vanadium blade, bi-material handle SL3–SL8, PH1–PH3; blade 75–200mm General fastener driving on KSA industrial and construction sites
Insulated Screwdriver Set — 1,000V VDE EN 60900; IEC 60900; VDE GS tested Chrome-vanadium blade, double-insulated handle SL4–SL6, PH1–PH2; 6-piece set Electrical panel, MCC, and switchgear maintenance up to 1,000V
Hex (Allen) Key Set — Metric Ball-End DIN 911; ISO 2936 Chrome-vanadium, black-oxide finish 1.5–19mm (9-piece) Socket-head cap screws on pumps, gearboxes, valves, and machinery
Ball-Peen Hammer ASME B107.50M; DIN 1041 Drop-forged carbon steel head, fibreglass handle 225 / 450 / 675 / 900 / 1,360g Metal forming, riveting, chisel driving — general engineering
Sledgehammer ASME B107.50M Drop-forged carbon steel head, fibreglass long handle 1.8 / 3.6 / 5.4 / 6.4 kg Demolition, concrete breaking, stake driving on KSA construction sites
Non-Sparking Hammer — Cu-Be Ball-Peen (ATEX) ATEX Group IIC compatible; material cert supplied Copper-beryllium alloy head, fibreglass handle 225 / 450 / 675g Zone 1 / Zone 2 hazardous areas — refinery, gas plant, chemical store
Non-Sparking Chisel — Cu-Be Cold Chisel (ATEX) ATEX Group IIC; material cert supplied Copper-beryllium alloy 150 / 200 / 250 / 300mm Metal and concrete cutting in flammable atmosphere hazardous areas
Cold Chisel Set (Chrome-Vanadium) DIN 7256; ASME B107.50M Chrome-vanadium, hardened tip 150–300mm; 6-piece set Concrete, brick, and metalwork cutting — general site use
Centre Punch & Pin Punch Set DIN 7256 / DIN 6453 Chrome-vanadium, knurled body 3 / 5 / 6 / 8 / 10mm pin punches; 5-piece set Bearing fitting, dowel removal, and drilling location marking
Steel Rule — Stainless (300mm) ISO 4035; DIN 866 Hardened stainless steel, satin finish 150 / 300 / 600 / 1,000mm; 0.5mm grad. Workshop measurement and layout — metric and imperial scales
Vernier Caliper — 0–200mm ISO 3599; DIN 862 Hardened stainless steel jaws 0–200mm; 0.02mm resolution OD, ID, depth, and step measurement in workshop and maintenance
Digital Caliper — 0–150mm IP54 ISO 13225; IP54 dust/splash protection Hardened stainless steel; LCD display 0–150mm; 0.01mm resolution Fast, accurate measurement in dusty workshop and field conditions
Outside Micrometer Set (0–75mm) ISO 3611; DIN 863 Hardened alloy steel; ratchet thimble; standard incl. 0–25 / 25–50 / 50–75mm; 3-piece set; 0.01mm Precision OD measurement for shafts, studs, and machined parts
Feeler Gauge Set — 25-Blade DIN 2275; ISO 3098 Hardened stainless steel blades 0.05–1.0mm (25 blades) Valve clearance, coupling alignment, and spark plug gap checking
Spirit Level — Aluminium (600mm) DIN 877; accuracy 0.5mm/m Aluminium body, acrylic vials, rubber end caps 300 / 600 / 1,200mm Pipework and equipment levelling on KSA industrial and construction sites
Chalk Line (Chalk Reel) — 30m General purpose ABS case, braided nylon line, powdered chalk 30m / 50m; blue or red chalk Marking straight reference lines on structural steel, concrete, and formwork
Why Us

Why Industrial Buyers in Saudi Arabia Choose Gulf Union Ozone for Hand Tools

⚡

Local Stock — Same-Day Dispatch

Full hand tool range stocked in Jeddah — spanners, torque wrenches, pliers, screwdrivers, hammers, and measuring tools shipped same-day to any KSA site. No waiting on imported tools when maintenance windows are tight.

📄

Calibration & ATEX Certifications Ready

Torque wrenches ship with factory calibration certificates traceable to national standards. Non-sparking tools ship with material certifications confirming alloy composition — both required at Saudi Aramco and SABIC site gates.

🎍

ISO 9001:2015 Certified Quality

Gulf Union Ozone is ISO 9001:2015 certified (CR 4030570569), Jeddah, Saudi Arabia — giving procurement teams confidence in product traceability and batch consistency on every hand tools order.

🗺

Nationwide KSA Delivery

Delivery to all 18 Saudi regions — Jubail, Yanbu, Dammam, Riyadh, Jizan, Tabuk, Ras Tanura, and beyond. Bulk project tool kits for EPC construction sites fulfilled with consistent lot tracking.

Related Products

Also Stocked at Gulf Union Ozone

Hardware

Fasteners

Bolts, studs, nuts, washers, and anchor bolts in carbon steel, alloy steel, and stainless steel to ASTM, ISO, and DIN standards.
Tools

Power Tools

Angle grinders, drills, impact wrenches, jigsaws, and cordless tool sets for Saudi Arabia industrial and construction sites.
MRO

MRO Supplies

Maintenance, repair, and operations consumables including tapes, sealants, abrasives, lubricants, and site chemicals for KSA industrial sites.
Safety

Lifting & Rigging Equipment

Chain hoists, wire rope slings, shackles, spreader beams, and rigging accessories for KSA industrial and construction projects.
Get a Quote

Request a Hand Tools & Hardware Quotation

To get a fast quotation, share: tool type (spanner / torque wrench / plier / screwdriver / hammer / measuring), size or range, material requirement (chrome-vanadium / non-sparking ATEX), quantity per line item, and delivery location in Saudi Arabia. Bulk project quantities and site tool kits welcome.

Email Inquiry Submit RFQ Form

CR 4030570569 | ISO 9001:2015 | Jeddah, Saudi Arabia

Inventory updated: August 2026

In Summary

Gulf Union Ozone Trading Co. supplies Hand Tools & Hardware to industrial customers across Saudi Arabia with delivery from our Jeddah warehouse — all products ship with original certificates and compliance documentation for Aramco, SABIC, and government projects.

In Summary

Hand Tools & Hardware from Gulf Union Ozone serves Saudi Aramco operations, SABIC, SADARA, SEC utilities, NEOM mega-projects, and major industrial facilities across the Kingdom — our inventory covers the most common specifications, grades, and sizes.

In Summary

Gulf Union Ozone stocks a comprehensive range of Hand Tools & Hardware across various specifications and capacities — contact us for immediate availability confirmation and a competitive quotation with full documentation.

In Summary

For urgent Hand Tools & Hardware procurement in Saudi Arabia, WhatsApp +966 55 098 8062 — our team confirms stock availability within the hour and provides competitive quotations with full compliance documentation for all industrial sectors.