| Angle Grinder 4½" 750W |
IEC 60745-2-3, EN 50144 |
Aluminum alloy body, steel spindle guard |
115mm disc, 11,000 rpm |
Metal grinding, deburring, surface prep |
| Angle Grinder 5" 850W |
IEC 60745-2-3, EN 50144 |
Aluminum alloy gear housing, steel guard |
125mm disc, 10,000 rpm |
Heavy grinding, weld bead removal |
| Angle Grinder 7" 2,000W |
IEC 60745-2-3, UL 45 |
Cast aluminum gear housing, steel body |
180mm disc, 8,500 rpm |
Large surface grinding, masonry cutting |
| Angle Grinder 9" 2,400W |
IEC 60745-2-3, UL 45 |
Die-cast aluminum body, steel wheel guard |
230mm disc, 6,500 rpm |
Heavy structural steel, stone cutting |
| Variable Speed Angle Grinder 5" |
IEC 60745-2-3, EN 50636-2-115 |
Aluminum housing, sealed ball bearings |
125mm disc, 2,800–11,000 rpm |
Stainless steel polishing, controlled grinding |
| Jigsaw 7.0A Barrel Grip |
IEC 60745-2-11, UL 45 |
Aluminum base plate, glass-fiber housing |
26mm stroke, 500–3,100 spm |
Metal sheet cutting, pipe notching |
| Jigsaw 6.5A Top Handle |
IEC 60745-2-11, EN 60745 |
Cast aluminum sole plate, polymer body |
26mm stroke, 800–2,800 spm |
Sheet metal, plastic, composite cutting |
| Orbital Jigsaw 5.5A |
IEC 60745-2-11, UL 45 |
Aluminum die-cast base, glass-fiber body |
22mm stroke, 500–3,100 spm |
Steel plate cutting, HVAC ductwork |
| Reciprocating Saw 12A Corded |
IEC 60745-2-11, UL 45 |
Magnesium gearcase, glass-fiber housing |
31mm (1¼") stroke, 0–2,900 spm |
Demolition, pipe and structural cutting |
| Reciprocating Saw 13A Corded |
IEC 60745-2-11, EN 60745 |
Magnesium housing, over-molded grip |
28mm stroke, 0–3,000 spm |
Pipe cutting, general demolition |
| Cordless Reciprocating Saw 20V |
IEC 62841-2-11, UL 62841 |
Magnesium boot, composite housing |
29mm stroke, 0–3,000 spm |
Remote-area pipe cutting, maintenance |
| Horizontal Band Saw 4¾"×4¾" |
ANSI B11.10, ISO 11148-10 |
Cast iron bow and vice, steel frame |
Capacity 120×120mm round/square |
Carbon steel bar and pipe cutting |
| Vertical Band Saw 12" |
ANSI B11.10, EN 848 |
Cast iron table, welded steel frame |
Throat: 305mm, blade 3–20mm wide |
Profile cutting, contour and curve cutting |
| Metal-Cutting Band Saw 14" |
ANSI B11.10, CE |
Cast iron table, welded steel column |
Round capacity: 355mm diameter |
Carbon steel bar and structural cutting |
| Portable Band Saw 6"×9" |
IEC 60745, ANSI B11.10 |
Die-cast aluminum body, glass-fiber housing |
Capacity 159×228mm, blade 14 TPI |
Pipe, conduit, strut cutting on site |
| Circular Saw 7¼" 15A |
IEC 60745-2-5, UL 45 |
Magnesium shoe and upper guard, aluminum base |
185mm blade, 5,800 rpm |
Sheet metal, wood, composite cutting |
| Compound Miter Saw 10" |
IEC 61029-2-9, UL 987 |
Cast aluminum table and fence, steel guard |
254mm blade, 0–45° bevel, 0–48° miter |
Precision crosscuts, angle cuts, trim work |
| Cold Saw 12" 1,500W |
EN 847-1, ISO 1174 |
Cast iron base, steel column and arm |
305mm HSS or TCT blade, 25–52 rpm |
Burr-free ferrous metal cutting |
| Abrasive Cut-Off Machine 14" |
ASME B7.1, OSHA 1910.243, UL 45 |
Cast iron base, steel spark guard |
355mm abrasive wheel, 3,900 rpm |
Structural steel, rebar, pipe cutting |
| Rotary Hammer SDS-Plus 800W |
IEC 60745-2-6, EN 60745 |
Aluminum alloy housing, sealed gearbox |
SDS-Plus, 0–1,050 rpm, 0–4,300 bpm, 2.7J |
Concrete drilling, chiseling |
| Rotary Hammer SDS-Max 1,100W |
IEC 60745-2-6, UL 45 |
Aluminum alloy, glass-fiber reinforced housing |
SDS-Max, 0–325 rpm, 0–2,900 bpm, 8.5J |
Heavy concrete, reinforced slab drilling |
| Rotary Hammer SDS-Max 1,400W (Hilti TE 70) |
IEC 60745-2-6, CE, ATEX optional |
Aluminum and glass-fiber composite body |
SDS-Max, 0–250 rpm, 0–2,300 bpm, 12J |
Anchor holes, structural concrete drilling |
| Demolition Hammer 1,600W |
IEC 60745-2-6, UL 45 |
Cast aluminum and glass-fiber housing |
Hex 28mm shank, 1,500–2,900 bpm, 35J |
Concrete breaking, wall chasing |
| Breaker/Chipping Hammer 1,500W |
IEC 60745-2-6, EN 60745 |
Aluminum alloy housing, rubber over-mold |
Hex 30mm shank, 1,400–2,800 bpm, 41J |
Foundation breaking, demolition |
| Impact Wrench ½" Pneumatic 7,500 rpm |
ISO 5393, ASME B107.17, EN 792-5 |
Chrome-molybdenum alloy steel anvil, aluminum housing |
½" sq. drive, 627 Nm max torque |
Bolt fastening, mechanical maintenance |
| Impact Wrench ¾" Pneumatic |
ISO 5393, ASME B107.17, EN 792-5 |
Alloy steel anvil, composite housing |
¾" sq. drive, 2,033 Nm max torque |
Heavy equipment assembly, flange bolting |
| Impact Wrench 1" Pneumatic |
ISO 5393, ASME B107.17, EN 792-5 |
Chrome-molybdenum steel anvil, cast aluminum body |
1" sq. drive, 3,390 Nm max torque |
Heavy structural bolting, large flange assembly |
| Cordless Impact Wrench ½" 18V |
IEC 62841-2-2, UL 62841 |
Magnesium gear housing, glass-fiber body |
½" sq. drive, 610 Nm max torque |
General maintenance, auto and plant work |
| Cordless Impact Driver ¼" 18V |
IEC 62841-2-2, UL 62841 |
Magnesium gear case, composite shell |
¼" hex, 306 Nm max torque, 0–3,600 rpm |
Screw driving, fastening applications |
| Corded Drill ½" VSR 7.5A |
IEC 60745-2-1, UL 45 |
Die-cast aluminum housing, steel chuck |
½" keyed chuck, 0–3,000 rpm |
General metal and wood drilling |
| Hammer Drill ½" 800W |
IEC 60745-2-1, EN 60745 |
Aluminum alloy body, sealed gearbox |
½" chuck, 0–3,000 rpm, 48,000 bpm |
Masonry and concrete drilling |
| Right Angle Drill ½" 4.5A |
IEC 60745-2-1, UL 45 |
Aluminum housing, right-angle gearhead |
½" keyed chuck, 0–1,350 rpm |
Confined space and corner drilling |
| Magnetic Drill Press 35mm |
EN ISO 28927-4, ANSI B11.12 |
Ductile iron magnetic base, steel column |
Annular cutter cap.: Ø12–Ø35mm, 2,000N holding |
On-site structural steel plate drilling |
| Annular Cutter Set HSS-Co (10 piece) |
ASME B94.19, DIN 1897 |
High Speed Steel M35 (HSS-Co 5%) |
Ø12–Ø50mm × 50mm depth, 19mm Weldon shank |
Mag-drill hole cutting in structural steel |
| Diamond Core Drill 230V |
IEC 61029-2-6, EN 13236 |
Steel core barrel, PCD diamond segments |
Ø52–Ø202mm, wet core drilling, 1,800 rpm |
Concrete core sampling, utility openings |
| Diamond Core Bit Set (Wet) |
EN 13236, ISO 6474 |
Steel barrel, 10mm sintered diamond segments |
Ø52mm–Ø202mm |
Water-cooled concrete and masonry coring |
| Die Grinder Straight 6mm 300W |
ISO 11148-3, OSHA 1910.242 |
Aluminum alloy body, precision steel collet |
6mm collet, 25,000 rpm |
Deburring, porting, weld bead cleanup |
| Die Grinder Right Angle 6mm |
ISO 11148-3, EN 792-2 |
Aluminum housing, angle head assembly |
6mm collet, 0–22,000 rpm |
Internal grinding, confined area work |
| Bench Grinder 8" 750W |
ANSI B7.1, EN 13236, OSHA 1910.215 |
Cast iron wheel guards, steel base and spindle |
200mm (8") wheel, 3,600 rpm |
Tool sharpening, metal deburring |
| Pedestal Grinder 10" 1,100W |
ANSI B7.1, OSHA 1910.215 |
Cast iron housing, welded steel pedestal |
250mm (10") wheel, 3,500 rpm |
Heavy-duty sharpening, shop grinding |
| Belt Sander 4"×24" 8.8A |
IEC 60745-2-4, UL 45 |
Aluminum alloy front and rear rollers, cast plate |
4"×24" belt, 0–1,475 ft/min |
Surface finishing, paint and weld spatter removal |
| Random Orbital Sander 5" 2.8A |
IEC 60745-2-4, EN 60745 |
Polypropylene housing, rubber backing pad |
125mm pad, 7,500–12,000 OPM |
Fine finishing, automotive and structural prep |
| Pipe Wrench 14" |
ASME B107.2, ISO 6330 |
Drop-forged alloy steel, heat-treated jaw |
355mm length, max pipe 1½" |
Pipe installation and maintenance |
| Pipe Wrench 18" |
ASME B107.2, ISO 6330 |
Drop-forged alloy steel, heat-treated |
457mm length, max pipe 2" |
Medium bore pipe assembly |
| Pipe Wrench 24" |
ASME B107.2, ISO 6330 |
Drop-forged alloy steel, heat-treated jaw and heel |
610mm length, max pipe 2½" |
Large bore pipe installation, oil & gas |
| Pipe Wrench 36" |
ASME B107.2, ISO 6330 |
Drop-forged alloy steel, hook jaw hardened |
914mm length, max pipe 4" |
Heavy-duty pipe turning, industrial piping |
| Chain Pipe Wrench 18" |
ASME B107.2 |
Forged alloy steel jaw, alloy-steel chain |
Pipe range 1"–4" |
Round and irregular pipe shapes |
| Strap Wrench Rubber |
ASME B107 |
Forged steel handle, high-friction rubber strap |
Pipe range 1"–4" |
Chrome and coated pipe, delicate surfaces |
| Pipe Cutter ½"–2" |
ASME B16.9, ISO 1127 |
Ductile iron frame, hardened steel cutting wheel |
12.7–50mm pipe OD |
Copper, steel, aluminum pipe cutting |
| Pipe Cutter 2"–4" |
ASME B16.9, ISO 1127 |
Ductile iron frame, hardened alloy cutting wheel |
50–100mm pipe OD |
Clean square cuts in medium pipe |
| Pipe Threading Machine ½"–2" |
ASME B1.20.1, ANSI/ASME B2.1 |
Alloy steel self-opening die head, cast iron housing |
½"–2" NPT / BSP threads |
Field and workshop pipe threading |
| Torque Wrench ½" Drive (Click Type) |
ISO 6789-1:2017, ASME B107.14 |
Chrome vanadium steel body and ratchet head |
½" drive, 25–250 Nm, ±4% accuracy |
Calibrated bolt tightening, flange assembly |
| Torque Wrench ¾" Drive (Click Type) |
ISO 6789-1:2017, ASME B107.14 |
Chrome vanadium steel, calibrated spring |
¾" drive, 100–600 Nm, ±4% accuracy |
Heavy flange bolting, pressure vessel assembly |
| Hydraulic Torque Wrench Square Drive |
ASME PCC-1, ISO 9001:2015 |
Alloy steel body, hardened chrome reaction arm |
500–35,000 Nm capacity range |
High-integrity flange bolting, pressure systems |
| Multi-Tool Oscillating 350W |
IEC 60745-2-4, CE |
Aluminum housing, universal tool mount |
1.6° oscillation angle, 10,000–20,000 OPM |
Cutting, sanding, scraping in tight spaces |
| Sheet Metal Nibbler 16-Gauge |
IEC 60745-2-15, CE |
Aluminum alloy body, hardened steel punch/die |
Up to 16-gauge (1.6mm) mild steel |
Sheet metal cutting, HVAC ductwork fabrication |
| Electric Metal Shear 2.8mm |
IEC 60745-2-15, UL 45 |
Hardened steel shear blades, aluminum body |
Up to 2.8mm mild steel, 3,500 spm |
Straight and curved sheet metal cuts |
| Cordless SDS-Plus Rotary Hammer 22V |
IEC 62841-2-6, CE |
Glass-fiber reinforced polymer housing |
SDS-Plus, 2J impact energy, 0–1,500 rpm |
Cordless concrete drilling and chiseling |
| Screw Gun Drywall 5A |
IEC 60745-2-2, UL 45 |
Magnesium housing, adjustable depth nose |
0–4,500 rpm, adjustable clutch |
Drywall, framing, steel deck fastening |
| Electric Pipe Beveling Machine |
ASME B31.3, AWS D1.1 |
Carbon steel beveling head, alloy cutter inserts |
1"–4" pipe, Schedule 10–80 |
Weld prep beveling, field pipe preparation |
| Pneumatic Pipe Beveling Machine |
ASME B31.3, EN 792 |
Alloy steel body, pneumatic vane motor |
2"–6" pipe range, 5–7 bar air supply |
On-site weld prep in explosive atmospheres |
| Hacksaw Frame Heavy Duty |
ANSI B107.22, ISO 6163 |
Chrome vanadium steel frame, bi-metal blade |
300mm (12") blade, 14–32 TPI |
Manual pipe and bar cutting |
| Bi-Metal Reciprocating Saw Blades (Pack) |
ISO 3855, DIN 1786 |
High-speed steel teeth, spring steel body |
150–300mm length, 6–18 TPI |
Metal pipe, conduit, nail-embedded wood |
| Abrasive Grinding Disc 4½" (Box of 25) |
ASME B7.1, EN 12413, ISO 603 |
Aluminum oxide abrasive, fiberglass reinforced |
115mm×6mm×22.2mm, max 13,300 rpm |
Steel and stainless steel grinding |
| Abrasive Cutting Disc 4½" (Box of 25) |
ASME B7.1, EN 12413 |
Aluminum oxide, double fiberglass reinforced |
115mm×1mm×22.2mm, max 13,300 rpm |
Steel pipe and bar parting cuts |
| Diamond Cutting Blade 9" (Dry/Wet) |
EN 13236, ANSI B7.1 |
Steel core, sintered diamond segments |
230mm OD, 22.2mm bore, max 6,650 rpm |
Concrete, masonry, granite cutting |
| Wire Brush Cup 4½" Knotted |
ISO 16089, ASME B7.1 |
High-tensile knotted carbon steel wire |
115mm cup, 22.2mm bore, max 12,000 rpm |
Rust, scale, and weld spatter removal |
| SDS-Plus Drill Bit Set (5-piece) |
DIN 8035, ISO 5468 |
Carbide tip, hardened alloy steel shank |
Ø6–Ø16mm × 160mm length |
Concrete and masonry anchor drilling |
| HSS Twist Drill Bit Set (19-piece) |
DIN 338, ISO 235 |
High Speed Steel M2, titanium nitride coated |
Ø1mm–Ø10mm, 118° point angle |
Steel, aluminum, plastics drilling |
