Cooling Towers — Saudi Arabia

Cooling Towers Supplier Saudi Arabia — Induced-Draft, Forced-Draft, Dry Coolers & Adiabatic Coolers In Stock

Gulf Union Ozone supplies a comprehensive range of industrial cooling towers and heat rejection equipment for oil & gas, petrochemical, power generation, HVAC, manufacturing, and water treatment facilities across Saudi Arabia. Our range covers induced-draft counter-flow and cross-flow FRP/GRP cooling towers (50 TR to 5000+ TR), forced-draft cooling towers, natural-draft cooling towers for utility scale, dry coolers (air-cooled heat exchangers) for water-free cooling, and adiabatic pre-cooled coolers for desert climate efficiency — to CTI ATC-105, ISO 16345, and ASHRAE 90.1 standards. FRP/GRP casing, PVC and HDPE fill media, stainless steel sumps, and hot-dip galvanised steel structural frames. Spare parts and replacement fill media also stocked. ISO 9001:2015 certified (CR 4030570569). Same-day dispatch from our Jeddah warehouse.

Submit RFQ
Cooling towers — induced-draft FRP cooling towers, dry coolers and adiabatic coolers stocked in Jeddah Saudi Arabia — Gulf Union Ozone
StandardsCTI ATC-105 · ISO 16345 · ASHRAE 90.1
MaterialsFRP/GRP casing · PVC/HDPE fills · SS sump · Galvanised structure
Range50 TR – 5000+ TR · Evaporative, dry & adiabatic types
DispatchSame-day parts from Jeddah
QualityISO 9001:2015
Cooling Tower Categories

Product Types in Stock

Gulf Union Ozone stocks and supplies six cooling tower and heat rejection equipment families for Saudi Arabia industrial and commercial applications — from factory-assembled FRP induced-draft towers to field-erected natural-draft hyperbolic towers and waterless dry coolers for desert-climate efficiency.

Type 01

Induced-Draft Cooling Towers — Counter-Flow

Induced-draft counter-flow cooling towers in FRP/GRP construction — the most widely used industrial cooling tower type in Saudi Arabia for process cooling in oil & gas, petrochemical, power, and HVAC applications. Air flows vertically upward through the fill media counter-current to the downward-falling hot water, maximising thermal performance per unit footprint. Axial propeller fan mounted at top of tower induces air flow through the fill (induced-draft arrangement) — fan in clean, cool exit-air stream reduces motor temperature and extends motor life. Fill media: counter-flow PVC cellular pack (0.5mm corrugated film, hang-type or block-type). Drift eliminators: PVC, drift rate ≤0.0005% by volume. Casing: UV-resistant FRP/GRP moulded panels; integral cold water sump. Available in factory-assembled modules from 50 TR to 500 TR; field-erected modular multi-cell units to 5000 TR+. Stainless steel SS 304 or SS 316L sump on request. CTI ATC-105 certified thermal performance. Hot-dip galvanised structural steel support frame. Fan drive: direct drive or bevel gearbox. Motor: IE3 efficiency, IP55, TEFC, suitable for ambient to 55°C.

Type 02

Induced-Draft Cooling Towers — Cross-Flow

Induced-draft cross-flow cooling towers where air flows horizontally through the fill media perpendicular to the vertically falling water — offering lower approach temperature for some process cooling duties, easier fill inspection, and lower pump head requirement (reduced water distribution height) compared to counter-flow designs. Preferred for large HVAC chiller cooling systems and refinery cooling water systems where low pump head and gravity-fed distribution is advantageous. Water distribution: open trough-type with hot water basin at top and gravity-fed through distribution nozzles over the splash or film fill. Fill media: cross-flow PVC splash bar or film pack. FRP/GRP casing; induced-draft axial fan at top. Factory-assembled modules 100 TR to 1000 TR; multi-cell field-erected to 5000 TR+. CTI ATC-105 thermal performance certification. Stainless steel or epoxy-coated cold water sump.

Type 03

Forced-Draft Cooling Towers

Forced-draft cooling towers with the fan mounted at the base of the tower inlet, pushing air through the fill media — suited for low-noise, low-profile installations and harsh environments where induced-draft fans would be exposed to warm, humid discharge air. Centrifugal or axial fan at air inlet forces air into the fill section; exit air discharges upward through the tower top without a fan (natural buoyancy assist). Lower fan blade stress compared to induced-draft; fan and motor in ambient air away from discharge plume — suitable for installations with noise restrictions (near residential boundaries in Jeddah and Riyadh industrial zones). FRP/GRP casing; counter-flow or cross-flow fill media PVC or HDPE. Galvanised steel or SS sump. Factory-assembled 50 TR to 500 TR. CTI ATC-105 certified.

Type 04

Natural-Draft Cooling Towers

Hyperbolic natural-draft cooling towers for utility-scale power generation and large petrochemical process cooling in Saudi Arabia — no mechanical fan required; buoyancy-driven air movement through the reinforced concrete hyperbolic shell (typical height 100m–200m). Used at Saudi Arabia power generation stations, SWCC desalination plants, and large integrated refinery/petrochemical complexes (Jubail, Yanbu, Ras Tanura) where large heat rejection capacity (above 20 000 TR) and low long-term operating cost outweigh the high initial capital cost. Film fill PVC or splash fill; reinforced concrete shell; stainless steel water distribution piping; cold water pond with liner. Engineering, procurement, and construction (EPC) subcontracting available. Shell design to BS EN 13791 / ACI 307.

Type 05

Dry Coolers (Air-Cooled Heat Exchangers)

Dry coolers (also called air-cooled fluid coolers or air-blast coolers) reject heat to ambient air via a finned-tube heat exchanger coil — with no evaporation of process fluid, zero water consumption, and no drift or Legionella risk. Essential for inland Saudi Arabia sites with limited water supply, or where HVAC chiller condensers or process fluid coolers require a fully closed-circuit waterless solution. Coil materials: copper tube + aluminium fin (most common, economical) for water-glycol cooling circuits; stainless steel SS 316L tube + SS fin for mild-chemical fluid cooling; all-SS (SS 316L) for corrosive process fluids. Frame: galvanised steel or powder-coat aluminium. Fan: axial propeller, direct drive or gearbox, variable speed drive (VSD) for energy saving during cooler Saudi nights. Capacity range: 50 kW to 5000 kW. EC fan motors for ultra-low energy consumption available. Glycol anti-freeze circuits for cold winter nights (Tabuk, Hail).

Type 06

Adiabatic Coolers

Adiabatic coolers combine the water-saving advantage of a dry cooler with evaporative cooling performance during peak summer heat — water is sprayed onto adiabatic pre-cooling pads upstream of the finned heat exchanger coil, reducing inlet air temperature by 8°C–15°C and dramatically improving cooling capacity during the hottest Saudi summer days (ambient 45–50°C) when dry cooler capacity falls significantly. Water consumption is 70–90% less than equivalent evaporative cooling towers. Pre-cooling pads: cellulose, glass fibre, or evaporation media — only wetted during peak duty. Ideal for data centre cooling, precision HVAC, and pharmaceutical process cooling in Saudi Arabia where cooling reliability during peak summer is critical but water consumption must be minimised. VSD fan drives and PLС-controlled pre-wetting logic for energy optimisation. Capacity range: 50 kW to 3000 kW. Closed-circuit arrangement — process fluid never contacts ambient air or water.

Product Catalog

Complete Cooling Tower & Heat Rejection Range — 28 Products

All cooling towers supplied with CTI ATC-105 or ISO 16345 thermal performance certificates, material certificates (EN 10204 3.1 for SS components), and manufacturer quality data books. ISO 9001:2015 QMS (CR 4030570569).

Product Standard / Spec Material Capacity / Size Application
Induced-Draft Counter-Flow Tower — FRP, 50 TR CTI ATC-105; ISO 16345 FRP casing; PVC counter-flow fill; GS frame 50 TR; design WBT 28°C; factory-assembled Small process cooler, HVAC chiller condenser, compressor cooling
Induced-Draft Counter-Flow Tower — FRP, 100 TR CTI ATC-105; ASHRAE 90.1 FRP casing; PVC cellular fill; GS frame; axial fan 100 TR; design WBT 28°C; single cell; factory-assembled HVAC chiller cooling, generator cooling, process plant cooling
Induced-Draft Counter-Flow Tower — FRP, 250 TR CTI ATC-105; ISO 16345 FRP; PVC fill; SS 304 sump option; bevel gearbox drive 250 TR; design WBT 28°C/32°C; modular 2-cell option Medium industrial cooling — compressor stations, refineries, HVAC
Induced-Draft Counter-Flow Tower — FRP, 500 TR CTI ATC-105; ISO 16345 FRP; high-density PVC fill; SS 316L sump; gear drive 500 TR; single or 2-cell module; field-assembled Process plant CW system, large HVAC system, power plant auxiliary
Induced-Draft Counter-Flow Tower — Modular Multi-Cell, 1000+ TR CTI ATC-105; field-erected; ISO 16345 FRP panels; PVC fill; SS 316L sump; HDG structural steel 1000–5000+ TR; multi-cell; fan per cell; VSD option Major refinery CW system, large petrochemical complex, power plant
Induced-Draft Cross-Flow Tower — FRP, 100 TR CTI ATC-105; ISO 16345 FRP; cross-flow PVC film fill; open basin; axial fan 100 TR; WBT 28°C design; gravity distribution; factory-assembled Low-pump-head HVAC cooling, food processing cooling
Induced-Draft Cross-Flow Tower — FRP, 500 TR CTI ATC-105; ASHRAE 90.1 FRP; cross-flow PVC fill; SS sump; gear-box driven 500 TR; field-assembled; multi-cell option Chilled water plant cooling, large HVAC complex, data centre cooling
Forced-Draft Cooling Tower — FRP, 50 TR CTI ATC-105; noise ≤60 dB(A) at 1m FRP casing; centrifugal fan at base; PVC fill 50 TR; low-profile; low noise; duct-able inlet Urban sites, noise-sensitive installations, roof-mounted cooling
Forced-Draft Cooling Tower — FRP, 200 TR CTI ATC-105; ISO 16345 FRP; centrifugal / axial forced-draft fan; SS sump option 200 TR; design WBT 28°C; fan in ambient air stream Gas processing cooler, compressor inter-cooling, HVAC city centre
Natural-Draft Cooling Tower — Hyperbolic (Utility Scale) CTI ATC-105; BS EN 13791; ACI 307 Reinforced concrete shell; PVC fill; SS water distribution; liner pond 10 000–100 000 TR; shell height 100–200m; fan-free Power generation, SWCC desalination, integrated petrochemical complex
Dry Cooler — Galvanised Steel, 100–300 kW EN 13741; ASHRAE 90.1 Cu tube + aluminium fin coil; HDG steel frame; axial fan 100–300 kW; air-cooled; 400V 3-phase motor Generator cooling, hydraulic oil cooling, small closed-loop cooler
Dry Cooler — Stainless Steel Coil, 500 kW EN 13741; ASHRAE 90.1 SS 316L tube + SS fin coil; SS frame; direct-drive EC fan 500 kW; EC fan; VSD ready; seawater-splash zone rated Chemical process cooling, coastal KSA sites, pharmaceutical cooling
Dry Cooler — High Capacity, 1000–5000 kW EN 13741; ASHRAE 90.1; AMCA 210 Cu tube / Al fin or all-Al; HDG frame; VSD fan per row 1000–5000 kW; multi-row; VSD energy saving; water-free Data centre free cooling, large HVAC closed loop, industrial process
Adiabatic Cooler — Pre-Cooling Pad Type, 200–500 kW EN 13741; ASHRAE 90.1 Cu/Al coil; cellulose pre-cooling pads; HDG frame; VSD 200–500 kW; 70–90% less water than cooling tower Data centre summer cooling, pharmaceutical cooling, process cooling KSA
Adiabatic Cooler — High Capacity, 500–3000 kW EN 13741; ASHRAE 90.1; PLC controlled SS 316L coil; glass-fibre evaporation media; EC fan; VSD 500–3000 kW; PLC pre-wetting; closed-circuit fluid Critical process cooling — minimum water, maximum reliability peak summer
Replacement PVC Fill Media — Counter-Flow Block Type CTI MR-800; ASTM D5757 fire retardant PVC; 0.5mm sheet; self-extinguishing UL94 V-0; hang or block Block 300×300×(150–600)mm; custom cut to size Replacement fill for any induced-draft counter-flow tower in KSA
Replacement PVC Fill Media — Cross-Flow Film Pack CTI MR-800; fire retardant PVC PVC corrugated film; UL94 V-0; custom cut sheets Sheet 300mm wide × any length; 0.3–0.5mm PVC Replacement fill for cross-flow cooling towers across Saudi Arabia
HDPE Fill Media — Chemical-Resistant (Heavy-Duty) CTI MR-800; HDPE chemical resistance HDPE; resistant to acids, alkali, chlorinated water to 60°C Block 300×300×(150–600)mm; temperature to 60°C Cooling towers on chemical plant, acid plant, chrome-plating CW circuits
Drift Eliminator — PVC (Low-Drift, ≤0.0005%) CTI STD-140; drift ≤0.0005% by volume PVC; three-pass sinusoidal profile; anti-microbial additive option Standard block sizes; custom cut for any tower frame Replacement drift eliminators — Legionella risk control in all tower types
Water Distribution Nozzle — ABS / PVC (Rotating & Fixed) ISO 10842; CTI design standards ABS or PVC body; ¾"–2" threaded spigot; free-rotation or fixed Flow 5–200 L/min per nozzle; spray angle 120°; low clog Replacement distribution nozzles for hot water basin headers
Axial Fan Blade Set — FRP, Variable Pitch CTI fan noise standard; AMCA 210 FRP aerofoil blade; adjustable pitch hub; balanced assembly Dia 1.0m–5.0m; 4 to 8 blades; tip speed certified Replacement fan blades for induced-draft and forced-draft towers
Cooling Tower Gear Reducer (Bevel Gearbox) AGMA 6010; CTI compatible Cast iron housing; spiral bevel gears; oil-lubricated; IP55 Output speed 100–200 RPM; input 1450/960 RPM; 5.5–75 kW Replacement gearbox for induced-draft towers — major brand cross-reference
Fan Motor — IE3, TEFC, IP55, 400V 50Hz IEC 60034; IE3 efficiency; IP55 Cast iron frame; Class F insulation; TEFC; suitable 55°C ambient 1.5–90 kW; 2-pole, 4-pole, 6-pole; B3/B14/B35 mounting Replacement fan motors for all cooling tower makes — KSA stocked
Cold Water Basin — SS 316L (Stainless Steel Sump) EN 10204 3.1 MTC; custom-fabricated SS 316L 3mm plate; TIG welded; electropolished interior Custom dimensions; flanged outlet; overflow & drain connections Replacement SS sump for corrosion-prone GRP/CS basins
Anti-Corrosion Coating — Epoxy Basin Lining SSPC SP6/SP10 surface prep; 2-part epoxy 2-part epoxy; 500 µm DFT; immersion grade; NSF 61 option 5L to 200L kit; pot life 30 min; cure 24 hrs at 25°C Extending service life of existing concrete or steel cooling tower sumps
Makeup Water Valve & Float Assembly ASTM D1785 (PVC float); BS 1212 ball valve PVC float; SS 316 rod; brass or PVC body ball valve ½"–2" valve; float dia 100–200mm; adjustable arm Automatic makeup water level control in cold water basin
Cooling Tower Chemical Dosing Unit (Skid-Mounted) ASHRAE 188 Legionella risk management PP chemical tank; SS 316 dosing pump; PVC manifold; pH probe 50–500L tank; biocide + scale inhibitor + corrosion inhibitor dosing Water treatment chemical dosing for cooling water circuit management
Blowdown Valve & Conductivity Controller ASHRAE 188; automatic TDS control SS 316 solenoid valve; conductivity controller; toroidal sensor Conductivity setpoint 0–5000 µS/cm; auto blowdown 230V Automatic cycles-of-concentration control in cooling tower circuits
Why Us

Why Saudi Arabia Industrial Buyers Choose Gulf Union Ozone for Cooling Towers

⚡

CTI ATC-105 Certified Thermal Performance

Every cooling tower supplied with CTI ATC-105 or ISO 16345 factory thermal performance test certificate — ensuring the tower meets rated TR capacity at the specified wet-bulb design temperature for Saudi Arabia desert climate.

📄

Spare Parts & Fill Media Stocked in Jeddah

Replacement PVC fill media, drift eliminators, distribution nozzles, fan blades, and gearboxes stocked in Jeddah for same-day dispatch — minimising cooling system downtime during Saudi Arabia summer peak demand.

🎍

ISO 9001:2015 Certified Quality

Gulf Union Ozone is ISO 9001:2015 certified (CR 4030570569), Jeddah, Saudi Arabia — with full material certification, inspection documentation, and quality data books for all cooling tower equipment.

🗺

Nationwide KSA Delivery

Cooling tower equipment and spare parts delivered to all Saudi Arabia regions including Jubail Industrial City, Yanbu, Dammam, Riyadh, Jizan, and Tabuk. Urgent fill media and parts dispatched same-day.

Related Products

Also Stocked at Gulf Union Ozone

Thermal

Heat Exchangers

Shell & tube heat exchangers, plate heat exchangers, and air-cooled fin-fan exchangers for process cooling and heat recovery across Saudi Arabia industrial plants.
Machinery

Pumps

Cooling water circulation pumps, condenser water pumps, and chemical dosing pumps for cooling tower water systems in Saudi Arabia industrial and HVAC applications.
Filtration

Industrial Filters

Y-strainers, basket strainers, and sand filters for cooling water circuit side-stream filtration to protect heat exchangers and cooling tower fill media from fouling.
MRO

MRO Supplies

Maintenance tools, sealants, gaskets, and consumables for cooling tower inspection, repair, and turnaround activities at Saudi Arabia industrial plants.
FAQ

Frequently Asked Questions — Cooling Towers Saudi Arabia

What type of cooling tower is best for Saudi Arabia's hot desert climate?

For Saudi Arabia's hot desert climate with wet-bulb temperatures of 28°C–35°C and ambient dry-bulb temperatures up to 50°C, induced-draft counter-flow FRP cooling towers are most widely used for process cooling. The FRP casing handles harsh UV and temperature conditions. For process cooling where water consumption must be minimised, dry coolers are preferred. Adiabatic coolers combine dry cooler efficiency with evaporative cooling performance — ideal for data centres and critical process cooling in KSA peak summer conditions. Gulf Union Ozone can advise on the correct cooling tower type for your specific duty and site conditions.

What cooling tower standards and certifications do you supply for Saudi Arabia projects?

Gulf Union Ozone supplies cooling towers certified to CTI ATC-105 for thermal performance testing, ISO 16345 as the international equivalent, and ASHRAE 90.1 for energy efficiency compliance. FRP/GRP casing construction meets ISO 4901 and ASTM C582. PVC fill media meets ASTM standards for chemical resistance and fire rating. All SS components are supplied with EN 10204 3.1 MTCs. Complete manufacturer quality data books with material certificates, factory test reports, and dimensional inspection records are provided with every supply.

Do you supply cooling tower spare parts and replacement fill media for existing towers in Saudi Arabia?

Yes. Gulf Union Ozone supplies replacement PVC fill media (counter-flow and cross-flow types), drift eliminators, water distribution nozzles, FRP fan blades, gear reducers, fan motors, SS sump liners, anti-corrosion basin coatings, and makeup water valve assemblies for existing towers across Saudi Arabia. Provide the tower manufacturer, model number, and year of manufacture via WhatsApp 966550988062 or email and our team will identify compatible parts from Jeddah stock.

Get a Quote

Request a Cooling Tower Quotation

To get a fast quotation, provide: heat load (TR or kW), hot water inlet temperature, cold water outlet temperature, design wet-bulb temperature, site ambient (dry-bulb), site elevation, flow rate (m³/h), cooling type (evaporative / dry / adiabatic), and delivery location in Saudi Arabia.

Email Inquiry Submit RFQ Form

Recent Deliveries

  • • FRP counterflow cooling towers (2,000 RT combined capacity) for a large industrial complex in Jubail, 2025
  • • Replacement fills and drift eliminators for a cooling tower refurbishment at a Yanbu refinery, 2025
  • • Modular crossflow cooling tower units for a district cooling plant in Riyadh, 2025

CR 4030570569 | ISO 9001:2015 | Jeddah, Saudi Arabia  —  Saudi Aramco vendor compliance · SAEP-347 credentials

Technical content reviewed by Gulf Union Ozone’s Engineering Team, Jeddah — 2026

Inventory updated: August 2026

In Summary

Gulf Union Ozone Trading Co. supplies Cooling Towers to industrial customers across Saudi Arabia with delivery from our Jeddah warehouse — all products ship with original Mill Test Certificates and Certificates of Conformance.

In Summary

Cooling Towers from Gulf Union Ozone serves Saudi Aramco SAEP-347 projects, SABIC, SADARA, SEC utilities, NEOM mega-projects, and industrial facilities across the Kingdom — our inventory covers the most common specifications and ratings.

In Summary

Gulf Union Ozone stocks a comprehensive range of Cooling Towers across various specifications, grades, and capacities — contact us for immediate availability confirmation and a quotation with full MTC traceability documentation.

In Summary

For urgent Cooling Towers procurement in Saudi Arabia, WhatsApp +966 55 098 8062 — our team confirms stock availability within the hour and provides competitive quotations with full compliance documentation for Aramco, SABIC, SEC, and government projects.