Industrial Paints & Protective Coatings Supplier Saudi Arabia
Gulf Union Ozone Trading Co. supplies a comprehensive range of Jotun and Hempel industrial protective coating systems to oil & gas operators, marine yards, EPC contractors, and industrial facilities across Saudi Arabia. Our stocked portfolio includes two-component epoxy primers, high-build epoxy coatings, polyurethane topcoats, zinc-rich cathodic-protection primers, coal tar epoxy, intumescent passive fire protection, and specialty linings for tanks and pipelines. Every product is dispatched from our Jeddah warehouse with full technical data sheets, safety data sheets, and batch certificates. Surface preparation guidance to Sa 2.5 / SSPC-SP 10 standards is available on request. We serve Jubail, Yanbu, Dammam, Riyadh, and all major KSA industrial zones with same-day dispatch on stocked items.
Request a Quote on WhatsApp
Main Coating System Categories
Jotun Epoxy Systems
Penguard, Jotamastic, Protecto, and Tankguard series — two-component epoxy primers and high-build mid-coats engineered for harsh chemical and splash-zone environments.
Hempel Epoxy Systems
Hempadur, Hempadur Mastic, and Hempacore series — industry-proven two-component epoxy coatings with excellent adhesion on grit-blasted steel for offshore and industrial use.
Zinc-Rich Primers
Organic and inorganic zinc silicate primers including Jotun Barrier and Hempel Hempazinc — 60–80 µm DFT cathodic protection as first coat in full paint systems.
Polyurethane Topcoats
Jotun Hardtop AX and Hempel Hempathane — two-component aliphatic polyurethane finishes providing UV and colour stability, gloss retention, and chemical resistance.
Industrial Paints & Coatings — Full Product List
55+ stocked products. Contact us for pricing, availability, and technical data sheets.
| # | Product | Brand | Type / Chemistry | DFT (µm unless noted) | Application |
|---|---|---|---|---|---|
| 1 | Penguard Express | Jotun | Epoxy primer | 75–125 | Fast-cure primer for structural steel; oil & gas, industrial |
| 2 | Penguard HB | Jotun | High-build epoxy | 100–250 | High-build epoxy mid-coat; structural steel, offshore, petrochemical |
| 3 | Hardtop AX | Jotun | Aliphatic polyurethane topcoat | 50–75 | UV-stable PU finish; topsides, process piping, atmospheric exposure |
| 4 | Jotamastic 87 | Jotun | Epoxy mastic | 100–300 | Surface-tolerant epoxy mastic; maintenance, overcoating, minimal prep |
| 5 | Barrier | Jotun | Zinc-rich epoxy primer | 60–80 | Cathodic-protection primer; structural steel, bridges, petrochemical |
| 6 | Hardtop Flexi | Jotun | Flexible polyurethane | 50–75 | Flexible topcoat for moving joints, splash zones, and roof structures |
| 7 | Protecto 390 | Jotun | Glass flake epoxy lining | 250–500 | Internal lining for crude oil, product, and water storage tanks |
| 8 | Tankguard HB | Jotun | High-build epoxy tank lining | 125–250 | Internal tank lining; petroleum product and chemical storage |
| 9 | Jotachar JF750 | Jotun | Epoxy intumescent (PFP) | 1.5–25 mm | Passive fire protection of structural steel; 1–3 hr fire rating |
| 10 | Sealer 77 | Jotun | Alkyd sealer | 25–40 | Sealer/primer for galvanized surfaces and aged alkyd coatings |
| 11 | Hempadur 15300 | Hempel | Epoxy primer | 75–125 | Two-component primer; structural steel, machinery, marine structures |
| 12 | Hempadur 45143 | Hempel | High-build epoxy | 125–200 | Anti-corrosive mid-coat; offshore topsides, jetties, industrial steel |
| 13 | Hempathane 55210 | Hempel | Polyurethane topcoat | 50–75 | Gloss finish; UV-stable topcoat for atmospheric and offshore exposure |
| 14 | Hempalin Primer 12050 | Hempel | Alkyd primer | 40–75 | One-pack alkyd primer; general metal, maintenance, light-duty steel |
| 15 | Hempazinc 17360 | Hempel | Zinc-rich epoxy primer | 60–80 | Cathodic-protection epoxy zinc primer; bridges, steel structures, tanks |
| 16 | Hempacore One | Hempel | Epoxy intumescent (PFP) | Up to 25 mm | Passive fire protection for structural steel; 1–3 hr certified rating |
| 17 | Hempadur Mastic 45880 | Hempel | Epoxy mastic | 125–200 | Surface-tolerant maintenance coating; minimally prepared steel |
| 18 | Hempacryl 46410 | Hempel | Acrylic topcoat | 50–75 | Water-borne acrylic finish; low-VOC, interior/exterior steel and concrete |
| 19 | Cold Galvanizing Compound — 95% Zinc | Generic | Cold galvanizing / zinc-rich | 40–75 | Brush/spray applied; weld seam repair, maintenance, touch-up of galvanized |
| 20 | Epoxy Putty Repair Compound | Generic | 2-part epoxy putty | As required | Surface filling, void repair on steel and concrete prior to painting |
| 21 | Coal Tar Epoxy | Generic | Coal tar modified epoxy | 400–500 | Below-ground and submerged steel; piles, pipelines, tank exteriors |
| 22 | Bituminous Paint | Generic | Bitumen / bituminous | 75–125 | Underground pipework, culverts, and general waterproofing |
| 23 | Chlorinated Rubber Paint | Generic | Chlorinated rubber | 40–75 | Chemical-resistant coating; acid environments, pools, concrete |
| 24 | Red Oxide Alkyd Primer | Generic | Alkyd primer | 40–60 | One-pack anti-corrosion primer; fabricated steel, general maintenance |
| 25 | Aluminum High Temp Paint (600 °C) | Generic | Silicone aluminum | 25–40 | Boilers, exhaust stacks, furnaces, high-temperature steel surfaces |
| 26 | Heat-Resistant Paint (400 °C) | Generic | Modified alkyd / silicone | 25–50 | Process equipment, hot pipework, and moderate-temperature steel |
| 27 | Pipeline Wrap Tape — Denso 225 | Denso | Petrolatum tape / corrosion tape | N/A (tape) | Corrosion protection of buried/above-ground pipeline joints and fittings |
| 28 | Aluminium Foil Tape — Self-Adhesive | Generic | Aluminium foil PSA tape | N/A (tape) | HVAC insulation, duct sealing, thermal jacketing, repair |
| 29 | VCI Corrosion Inhibitor Paper | Generic | Volatile corrosion inhibitor | N/A | Temporary preservation of machined parts, steel during storage/transit |
| 30 | 2-Part Epoxy Adhesive | Generic | Two-component epoxy | N/A | Structural bonding of metals, ceramics, and plastics |
| 31 | Rust Converter Primer | Generic | Tannic acid / phosphoric acid | 40–75 | Convert active rust to stable substrate; maintenance on rusted steel |
| 32 | Quick-Dry Alkyd Topcoat | Generic | Alkyd topcoat (1K) | 40–60 | Fast-dry decorative and protective finish; general industrial steel |
| 33 | Intumescent Fire Sealant (1–3 hr rated) | Generic | Intumescent sealant | N/A | Fire stopping at pipe, cable, and duct penetrations through fire walls |
| 34 | Epoxy Floor Paint — 2-Part | Generic | Two-component epoxy floor | 100–200 | Industrial and warehouse floors; chemical-resistant, easy-clean surface |
| 35 | Anti-Slip Epoxy Floor Coating | Generic | Two-component epoxy + aggregate | 200–400 | Ramps, wet areas, and safety-critical factory floors |
| 36 | Tank Lining Epoxy — Food Grade | Generic | NSF/FDA-compliant epoxy lining | 250–500 | Potable water tanks, food and beverage storage, pharma vessels |
| 37 | High-Build Epoxy Coal Tar Pitch | Generic | Coal tar pitch epoxy HB | 300–500 | Offshore jacket legs, quay walls, tidal zones, buried structures |
| 38 | Marine Antifouling Paint | Generic | Antifouling — SPC or ablative | 75–150 | Vessel hulls, boat hulls, marine structures below waterline |
| 39 | Surface Cleaner / Degreaser Solvent | Generic | Solvent degreaser (SSPC-SP 1) | N/A | Pre-blast cleaning of oil, grease, and contamination from steel surfaces |
| 40 | Paint Thinner — Slow / Medium / Fast Dry | Generic | Aromatic / aliphatic solvent | N/A | Viscosity adjustment and tool cleaning for solvent-borne paint systems |
| 41 | Primer Undercoat — 1-Part PU | Generic | Single-component polyurethane | 40–75 | Moisture-cure primer; maintenance in damp conditions, galvanized steel |
| 42 | 2-Component PU Topcoat — Gloss | Generic | Two-component aliphatic PU | 50–75 | High-gloss finish; colour retention, chemical splash resistance |
| 43 | Floor Marking Paint — Yellow / Red / White | Generic | Quick-dry epoxy / alkyd | 75–125 | Factory, warehouse, and car park floor demarcation lines and symbols |
| 44 | Epoxy Bonding Primer | Generic | Two-component epoxy bond coat | 40–75 | Inter-coat adhesion promoter between dissimilar coating systems |
| 45 | Water-Based Acrylic Primer | Generic | Waterborne acrylic | 40–75 | Low-VOC primer for light-duty steel and concrete; interior use |
| 46 | Zinc Phosphate Primer | Generic | Alkyd zinc phosphate (1K) | 40–75 | Anti-corrosion primer for fabricated steel, general engineering |
| 47 | Silicone Sealant — High Temperature | Generic | High-temp silicone (up to 300 °C) | N/A | Sealing joints and penetrations in high-temperature process areas |
| 48 | Mastic Sealant — Gun Grade | Generic | Polyurethane / polysulfide mastic | N/A | Movement joints, concrete expansion gaps, cladding perimeters |
| 49 | Brushable Epoxy Touch-Up Kit | Generic | Two-component epoxy (brush grade) | 50–150 | Field touch-up and repair of coating defects, holidays, and damage |
| 50 | Airless Spray Equipment Maintenance Kit | Generic | Filters, tips, seals, lubricant | N/A | Preventive maintenance consumables for airless spray application rigs |
| 51 | Paint Brushes & Rollers Set | Generic | Natural/synthetic bristle; foam roller | N/A | Manual application tooling for primers, mid-coats, and topcoats |
| 52 | Penguard Primer | Jotun | Epoxy primer | 75–100 | General epoxy primer; new construction steel and maintenance work |
| 53 | Hempadur Zinc 17360 Inorganic | Hempel | Inorganic zinc silicate | 60–80 | High-performance shop primer and field primer for blast-cleaned steel |
| 54 | Jotun Resist 86 | Jotun | Inorganic zinc silicate | 60–80 | Shop primer for prefabricated structural steel; excellent weldability |
| 55 | Hempel Hempalin Enamel 52140 | Hempel | Alkyd enamel topcoat | 40–75 | Decorative topcoat; general industrial and architectural steel |
| 56 | Epoxy Amine Cured Tank Coating | Generic | Amine-cured epoxy | 150–300 | Chemical storage tanks, process vessels, secondary containment linings |
| 57 | Jotun Megaseal ST | Jotun | Epoxy surface tolerant | 75–150 | Surface-tolerant primer for poorly prepared or pitted steel surfaces |
Surface Preparation & Measurement Standards
Surface Preparation Standards
- Sa 2.5 — Near-white metal blast (ISO 8501-1); required for most epoxy systems
- Sa 3 — White metal blast; required for zinc silicate and immersed service
- SSPC-SP 10 — Near-white blast (US equivalent to Sa 2.5)
- SSPC-SP 6 — Commercial blast; suitable for alkyd and surface-tolerant epoxy
- SSPC-SP 1 — Solvent cleaning; degreasing prior to abrasive blasting
- ISO 8503 — Surface profile (Rz) assessment for anchor pattern
DFT Measurement Standards
- ISO 19840 — DFT measurement on rough surfaces; correction values applied
- SSPC-PA 2 — US standard for thickness measurement frequency on steel
- ISO 2808 — Methods for measurement of film thickness
Temperature Resistance Ranges
- Standard epoxy: up to 120 °C dry heat
- High-temp alkyd/silicone: up to 400 °C
- Silicone aluminium: up to 600 °C
- High-temp silicone sealant: up to 300 °C
- PFP intumescent: rated per BS 476 / ASTM E119 fire curves
Why Gulf Union Ozone for Industrial Coatings in KSA
Same-Day Dispatch
Stocked items ship same day from our Jeddah warehouse to all KSA regions including Jubail, Yanbu, Dammam, and Riyadh.
Documentation Ready
Full TDS, MSDS/SDS, batch certificates, and COC available for every shipment — essential for Aramco, SABIC, and SEC projects.
ISO 9001:2015 Certified
Our quality management system ensures consistent product handling, traceability, and reliable supply to industrial and EPC clients.
Nationwide KSA Coverage
Servicing contractors and facilities across the entire Kingdom — Western Province, Eastern Province, Riyadh Region, and beyond.
Related Products & Services
Request a Quote for Industrial Paints & Coatings
Need a Jotun or Hempel coating system for your project? Our team can advise on the correct surface prep standard, coating specification, and product availability. Same-day dispatch on stocked items from Jeddah, Saudi Arabia.
CR 4030570569 | ISO 9001:2015 | Jeddah, Saudi Arabia | Inventory updated: August 2026