| XLPE/SWA/PVC Power Cable 0.6/1kV |
IEC 60502-1, BS 6724 |
Copper conductors, XLPE insulation, steel wire armour, PVC sheath |
1.5mm² – 400mm², single/multi-core |
Power distribution in industrial plants, substations, MCC feeders |
| XLPE/SWA Power Cable 3.6/6kV (MV) |
IEC 60502-1, BS 6622 |
Copper, XLPE, semi-con screens, SWA, PVC sheath |
16mm² – 300mm², 3-core |
Medium-voltage feeders, ring main units, substation outgoing |
| XLPE Power Cable 8.7/15kV (MV) |
IEC 60502-2, BS 7835 |
Copper, XLPE, semi-con tape screens, lead sheath option |
35mm² – 240mm², 3-core |
MV distribution networks, underground utility cables |
| PVC Insulated Multicore Control Cable |
IEC 60227, BS 5308-1 |
Stranded copper conductors, PVC insulation & sheath |
0.75mm² – 6mm², 2–37 cores |
Instrumentation, PLC I/O wiring, control panels |
| LSZH Armoured Power Cable 0.6/1kV |
IEC 60502-1, IEC 60332-3-24, IEC 60754 |
Copper, XLPE, SWA, LSZH outer sheath |
1.5mm² – 240mm², single/multi-core |
Offshore platforms, tunnels, confined spaces, public buildings |
| Fire Resistant Cable (FRC / CWZ) LSZH |
BS 7629-1, IEC 60331-21, IEC 60332-1 |
Copper, mica glass tape, LSZH sheath |
1.5mm² – 16mm², 2–4 core, 90-min circuit integrity |
Fire alarm systems, emergency lighting, evacuation circuits |
| Flexible Rubber Trailing Cable |
IEC 60245-4 (designation 60245 IEC 66), BS EN 50525-2-21 |
Flexible copper conductors, EPDM insulation, CR (neoprene) outer sheath |
1.5mm² – 95mm², 3–5 core |
Mobile equipment, cranes, hoists, reeling cables |
| Thermocouple Extension Cable (K-type) |
IEC 60584-3, ASTM E230 |
NiCr / NiAl alloy conductors, PVC or PTFE insulation, overall screened |
1 pair, 2 pair, overall shielded, -40°C to +200°C |
Temperature measurement and data logging in industrial processes |
| Miniature Circuit Breaker (MCB) 1-Pole |
IEC 60898-1, EN 60898-1 |
Thermoplastic housing, silver alloy contacts, bi-metal trip |
1A – 63A, B / C / D trip curve, 6kA |
Residential and light commercial final circuit protection |
| Miniature Circuit Breaker (MCB) 3-Pole |
IEC 60898-1, EN 60898-1 |
Thermoplastic housing, silver alloy contacts, bi-metal trip |
6A – 63A, B / C curve, 10kA |
Three-phase distribution boards, motor branch protection |
| Moulded Case Circuit Breaker (MCCB) 3-Pole |
IEC 60947-2, EN 60947-2 |
Glass-reinforced thermoplastic, silver contact tips, electronic or TMD trip |
16A – 1600A, 25–85kA breaking capacity |
LV power distribution panels, sub-main protection in MCCs |
| Air Circuit Breaker (ACB) 3-Pole / 4-Pole |
IEC 60947-2, EN 60947-2 |
Steel enclosure, silver-alloy arc contacts, drawout or fixed |
630A – 6300A, up to 100kA, electronic trip unit |
Main LV switchboards, MCC incoming, bus coupler, tie breaker |
| Residual Current Circuit Breaker (RCCB) 2P/4P |
IEC 61008-1, EN 61008-1 |
Thermoplastic housing, toroidal core current transformer |
25A – 125A, 30mA / 100mA / 300mA sensitivity |
Earth leakage protection in distribution boards and panels |
| RCBO (MCB + RCD Combined) 1P+N |
IEC 61009-1, EN 61009-1 |
Thermoplastic, silver contacts, 6kA short-circuit rated |
6A – 40A, 30mA sensitivity, B / C curve |
Individual circuit protection with combined overcurrent and earth fault |
| HRC Fuse — gG / gL Type |
IEC 60269-1, IEC 60269-2, BS 88 |
Ceramic body, silver fuse element, quartz sand filler |
2A – 800A, 80kA breaking capacity, 400V / 690V |
Short-circuit protection for cables, busbars, motor starters |
| Fuse Base / Holder (DIN knife contact) |
IEC 60269-3, EN 60269-3 |
Thermoplastic base, copper knife contacts, DIN rail mount |
00 / 0 / 1 / 2 / 3 fuse size, 63A – 400A |
Main distribution boards, panel HRC fuse carriers |
| Surge Protection Device (SPD) Type 1+2 |
IEC 61643-11, EN 61643-11 |
Zinc oxide varistors + spark gap, thermoplastic enclosure |
Iimp 25kA, Imax 40kA, 1P / 3P+N, 230/400V |
Main distribution boards, lightning and transient overvoltage protection |
| AC Contactor 3-Pole (AC-3 duty) |
IEC 60947-4-1, EN 60947-4-1 |
Thermoplastic housing, AgSnO2 contacts, laminated core |
9A – 800A (AC-3), coil 24/48/110/230/400V AC or 24/48V DC |
Three-phase motor switching, power switching in MCCs and starters |
| AC Contactor 4-Pole (AC-1 duty) |
IEC 60947-4-1, IEC 60947-1 |
Thermoplastic housing, AgSnO2 contacts, 4 main poles |
25A – 200A (AC-1), 400/690V |
Resistive load switching, capacitor banks, 4-wire circuits |
| Thermal Overload Relay (bimetallic) |
IEC 60947-4-1, EN 60947-4-1 |
Bimetal strip, thermoplastic housing, manual / auto reset |
0.1A – 630A, adjustable setting range |
Motor overload and phase-failure protection in starters |
| Electronic Overload Relay (solid-state) |
IEC 60947-4-1, IEC 60529 (IP20) |
Solid-state electronics, self-powered from motor current, thermoplastic |
0.3A – 100A, trip class 5 / 10 / 20 / 30 |
Pump, compressor, and conveyor motor protection — higher accuracy |
| Motor Protection Circuit Breaker (MPCB) |
IEC 60947-2, IEC 60947-4-1 |
Thermoplastic, thermal-magnetic trip, rotary handle |
0.1A – 100A, up to 50kA, adjustable Ir |
Direct motor protection in panels, replacing MCCB + overload relay |
| DOL Direct-On-Line Motor Starter |
IEC 60947-4-1, IEC 61439-1 |
Steel enclosure RAL 7035, IP54 / IP55, contactor + overload inside |
0.37kW – 75kW, 400/690V, 50Hz |
Small and medium motor direct-on-line starting applications |
| Star-Delta Starter (automatic timer) |
IEC 60947-4-1, IEC 61439-1 |
Steel enclosure IP54, 3 contactors + timer + overload relay |
5.5kW – 630kW, 400/690V, adjustable transition timer |
Reduced-voltage starting of large squirrel-cage induction motors |
| Reversing Contactor Starter Assembly |
IEC 60947-4-1, IEC 60947-5-1 |
Mechanically & electrically interlocked contactor pair, thermoplastic |
1.1kW – 200kW, 400V |
Bi-directional motor drives: conveyors, lifts, valve actuators |
| Soft Starter (3-phase thyristor) |
IEC 60947-4-2, IEC 61800-3 |
SCR thyristors, aluminium heatsink, IP20 (IP55 option) |
4kW – 1000kW, 230–690V, 50/60Hz |
Smooth motor acceleration for pumps, fans, and compressors |
| Variable Frequency Drive (VFD / Inverter) |
IEC 61800-3 (C2/C3), IEC 61800-5-1, CE, UL 508C |
IGBT inverter, aluminium housing, IP20 / IP55 / IP66 options |
0.37kW – 800kW, 400V / 690V, 50/60Hz |
Variable speed drives for HVAC, pumps, compressors, conveyors |
| IE3 Premium Efficiency AC Induction Motor (3-phase) |
IEC 60034-1, IEC 60034-30-1 (IE3), NEMA MG1 |
Cast iron or aluminium frame, copper windings, IP55, class F insulation |
0.12kW – 375kW, 400/690V, B3/B5/B14 mounting, 2/4/6 pole |
General industrial drives: pumps, fans, compressors, conveyors |
| ATEX Explosion-Proof Motor (Ex d / Ex e) |
IEC 60034-1, IEC 60079-1, IEC 60079-7, ATEX II 2G Ex d/e IIC T3/T4 |
Cast iron frame, IP65, class F insulation, IECEx certified |
0.37kW – 200kW, 400/690V, 2/4/6 pole, Zone 1 & Zone 2 |
Oil & gas, petrochemical, chemical plants — hazardous areas |
| DC Electromagnetic Brake Motor |
IEC 60034-1, EN 60034-5 |
Cast iron frame, IP55, DC electromagnet brake, copper windings |
0.12kW – 75kW, 400V, brake torque 3–300 Nm |
Hoists, cranes, conveyors — rapid and safe stopping required |
| Push Button NO/NC (22mm flush) |
IEC 60947-5-1, EN 60947-5-1, IP65 (IEC 60529) |
Thermoplastic body, optional metal bezel, silver contact element |
22mm panel cut-out, standard operator colours (green/red/black) |
Machine start / stop, panel control on MCCs and starters |
| Emergency Stop Pushbutton (mushroom head) |
IEC 60947-5-5, ISO 13850, EN ISO 13849-1 (PLd) |
Yellow/red housing, latching mushroom head, key-release or twist-release |
40mm head, 22mm panel cut-out, 1NC + 1NC contacts |
Machine safety stop circuits, hazardous area manual initiation |
| Selector Switch 2/3-Position (22mm) |
IEC 60947-5-1, IP65 |
Thermoplastic, silver alloy contacts, key/knob operator |
22mm cut-out, spring-return or maintained positions |
Mode selection (Auto / Manual / Off) in control panels |
| Rotary Cam Switch (4-pole panel mount) |
IEC 60947-3, EN 60947-3 |
Thermoplastic housing, silver-plated copper contacts, cam-operated |
10A – 100A, 400V AC, up to 12 positions |
Main isolators, changeover switches, reversing switches in panels |
| LED Pilot Light / Indicator (22mm) |
IEC 60947-5-1, IP65 (IEC 60529) |
Thermoplastic body, LED lamp element, integral resistor |
22mm, 24V / 110V / 230V AC/DC, multiple colours |
Run / fault / alarm status indication on control panels |
| Limit Switch (roller plunger, IP67) |
IEC 60947-5-1, IP67 (IEC 60529) |
Die-cast zinc alloy body, stainless steel roller plunger, snap-action |
SPDT or DPDT contacts, 10A 400V, various actuator styles |
End-of-travel position sensing on conveyors, gates, presses |
| Inductive Proximity Sensor (PNP/NPN) |
IEC 60947-5-2, EN 60947-5-2, IP67 |
Stainless steel or PBT thermoplastic housing, M12 PVC cable |
M8 / M12 / M18 / M30, sensing range 1–20mm, 10–30V DC |
Metal object detection in automation, machine tooling, robotics |
| Photoelectric Sensor (diffuse / through-beam) |
IEC 60947-5-2, IP67 |
Polycarbonate or stainless housing, M12 or pigtail output |
Sensing range 0.1–15m, PNP/NPN, 10–30V DC |
Object / level detection on conveyor lines, packaging machines |
| 24VDC DIN Rail Power Supply (SMPS) |
IEC 61558, IEC 62477, UL 508A, CE marked |
Switched-mode, aluminium housing, DIN TS35 rail mount |
2.5A / 5A / 10A / 20A / 40A, 100–240V AC input, 24V DC output |
PLC control circuits, relay coils, 24V instrumentation power |
| Isolation Transformer (1-phase, medical grade) |
IEC 61558-2-4, EN 61558-2-15 |
Copper windings, CRGO silicon steel core, IP23 ventilated |
0.25kVA – 10kVA, 230V/230V, class F insulation |
Medical equipment, IT rooms, sensitive laboratory instruments |
| Control Transformer (3-phase to 110V AC) |
IEC 61558-2-2, BS EN 61558-2-2 |
Copper windings, CRGO core, IP23 or IP44 |
0.25kVA – 25kVA, 415V primary / 110V secondary, 50Hz |
Control circuit supply in MCCs, motor starters, switchboards |
| Current Transformer (wound primary type) |
IEC 61869-2, BS EN 61869-2 |
Epoxy resin encapsulated, copper secondary winding |
50/5A – 3000/5A ratio, accuracy class 0.5 / 1 / 3, 5VA – 30VA burden |
Metering circuits, protection relay current input, power monitoring |
| Power Factor Correction Capacitor (LV) |
IEC 60831-1, EN 60831-1 |
Metallised polypropylene film, aluminium can, thermoplastic end cap |
2.5kVAr – 50kVAr, 400V / 440V, 50Hz, self-healing |
Power factor correction panels, reactive power compensation |
| DIN Rail Screw Terminal Block (feed-through) |
IEC 60947-7-1, DIN VDE 0611 |
PA (polyamide) housing, copper alloy current bar, nickel-plated screw |
1.5mm² – 95mm² per pole, DIN TS35 rail mount |
Control panel field wiring terminations, marshalling racks |
| DIN Rail (35mm TS35, 7.5mm & 15mm height) |
IEC 60715, EN 60715 |
Hot-dip galvanised steel or aluminium, perforated or slotted |
35mm width, supplied in 1m and 2m lengths |
Mounting MCBs, contactors, relays, and terminals in enclosures |
| Copper Busbar — Flat Hard-Drawn (ETP) |
IEC 60028, BS 1433, EN 13601 |
99.9% electrolytic tough pitch copper (ETP), bright or tin-plated |
12×3mm – 100×10mm cross-section, 2m / 3m lengths |
LV panel busbars, earthing conductors, main distribution connections |
| Busbar Trunking System (LV, aluminium) |
IEC 61439-6, IEC 60439-2 |
Aluminium conductors, extruded aluminium housing, IP54 |
40A – 5000A, 400V / 690V, standard 3m section lengths |
Factory power distribution, riser mains in multi-storey buildings |
| Wire End Ferrule (insulated, PA sleeve) |
DIN 46228-4, IEC 60947-7-1 |
Electrolytic copper pin, LLDPE colour-coded insulation sleeve |
0.25mm² – 16mm², standard DIN colour coding |
Stranded wire termination in terminal blocks and equipment connectors |
| Copper Compression Cable Lug (tin-plated) |
IEC 61238-1, DIN 46235, BS 4579 |
Electrolytic copper, tin electro-plated, long barrel crimp |
6mm² – 630mm², stud sizes M6 – M20 |
LV cable termination on switchgear busbars, motors, and transformers |
| Heat Shrink Tubing (dual-wall with adhesive) |
IEC 60684-2, MIL-DTL-23053/4 |
Polyolefin outer, hot-melt adhesive liner, 3:1 shrink ratio |
Ø3mm – Ø150mm expanded diameter, black or clear |
Cable jointing, connector insulation, moisture-sealing terminations |
| Nylon Cable Tie (UV-stabilised PA66) |
IEC 62275, UL 62275, RoHS compliant |
PA66 polyamide with UV stabiliser (for outdoor use) |
100mm – 920mm length, tensile strength up to 550N |
Cable bundling and management in panels, trays, and outdoor installations |
| Brass Cable Gland (metric, nickel-plated) |
EN 62444, BS 6121-1 |
Nickel-plated brass body, neoprene seal, PVC shroud option |
M16 – M80 metric thread, IP68 (10m / 30 min) |
Cable entry sealing into panels, junction boxes, motor terminal boxes |
| 316 SS Cable Gland (for SWA armoured cable) |
EN 62444, BS 6121-1 |
316L stainless steel, EPDM seal, armour clamping ring |
M20 – M80, IP68, suitable for SWA and SWBA cable |
Marine, offshore, and corrosive environment cable terminations |
| ATEX Ex-proof Cable Gland (Ex e / Ex d) |
IEC 60079-1, IEC 60079-7, ATEX II 2GD Ex e/d |
Nickel brass or 316 SS, IECEx and ATEX certified |
M20 – M63, IP66/IP68, Ex e / Ex d certified |
Hazardous area cable entries — Zone 1 and Zone 2 applications |
| Perforated Cable Tray (hot-dip galvanised) |
EN 61537, BS EN 61537 |
Hot-dip galvanised (HDG) mild steel to BS EN ISO 1461 |
50 – 600mm wide, 50 / 75 / 100mm depth, 3m sections |
Cable routing in plant rooms, substations, cable basements |
| Cable Ladder (hot-dip galvanised) |
EN 61537, BS EN 61537 |
Hot-dip galvanised mild steel, welded rung construction |
100 – 900mm wide, rung spacing 250mm / 300mm, 3m sections |
Heavy cable routes, bulk power cable runs in industrial plants |
| Galvanised Steel Conduit (heavy gauge) |
IEC 61386-22, BS 4568, BS EN 61386 |
Hot-dip galvanised steel, threaded ends, heavy-gauge wall |
Ø20mm – Ø50mm, 3.75m lengths, metric or BSP thread |
Industrial wiring protection in oil & gas, petrochemical facilities |
| Flexible Metal Conduit (galvanised steel) |
IEC 61386-23, UL 360 |
Galvanised steel interlocked spiral, PVC jacketed option |
Ø12mm – Ø50mm, sold per metre |
Motor termination connections, vibrating equipment, last 500mm drops |
| Rigid PVC Conduit & Fittings (HI) |
IEC 61386-21, EN 50086-2-1 |
Heavy-impact (HI) rigid PVC, self-extinguishing, UV-stabilised |
Ø16mm – Ø63mm, 3m lengths, matching elbows/boxes |
Surface and concealed wiring in commercial and light industrial buildings |
| GRP Junction Box (IP66/IP67) |
IEC 60529, IEC 62208, BS EN 62208 |
Glass reinforced polyester (GRP), stainless captive screws, neoprene gasket |
100×100×75mm – 600×400×200mm, RAL 7035 grey |
Outdoor field junction wiring, coastal and corrosive environments |
| Steel Control Panel Enclosure (freestanding IP54) |
IEC 61439-1, IEC 60529 IP54 / IP65 |
2mm mild steel, powder coated RAL 7035, stainless hinges/locks |
W600–W2000 × H800–H2400 × D300–D800mm |
MCCs, LV switchboards, motor starters, distribution panels |
| Anti-Condensation Heater (thermostat-controlled) |
IEC 60068-1, DIN VDE 0632, CE marked |
Aluminium alloy body, PTC heating element, adjustable thermostat |
15W – 150W, 110V / 230V AC, DIN rail or screw mount |
Preventing condensation in outdoor panels, switchgear, and cabinets |
| Electromechanical Interface Relay (plug-in) |
IEC 61810-1, IEC 60947-5-1 |
Thermoplastic housing, AgNi or AgSnO2 contacts, octal or Minature base |
8-pin / 11-pin / 14-pin, coil 24VDC or 24/110/230V AC, 2CO or 4CO |
Control circuit switching, PLC output isolation, signal conditioning |
| Time Delay Relay (on-delay / off-delay) |
IEC 61812-1, EN 61812-1 |
Electronic timing circuit, thermoplastic, DIN rail or panel mount |
0.1s – 100h timing range, 24/110/230V AC/DC, SPDT or DPDT |
Star-delta transition timing, pump sequencing, alarm delays |
| Phase Sequence & Phase Failure Relay |
IEC 60255, DIN VDE 0435 |
Electronic, DIN rail mount, LED indication, relay output |
3-phase 380–440V AC, SPDT output relay, adjustable voltage window |
Motor protection against wrong phase sequence, phase loss, voltage imbalance |
| Solid State Relay (SSR), DC control / AC load |
IEC 60947-4-3, UL 508, CE marked |
SCR or TRIAC output, aluminium heatsink base, epoxy sealed |
10A – 120A output, 24–380V AC, 3–32V DC control input |
Noiseless switching, high-cycle applications, heating element control |
| Digital Panel Ammeter (96×96mm) |
IEC 61557-12, IEC 62053-21 |
Thermoplastic housing, LED / LCD display, snap-in bezel |
0–999A, CT input 5A, 96×96mm or 72×72mm |
Current monitoring on motor starters, distribution panels |
| DIN Rail Multifunction Power Analyser |
IEC 61557-12, IEC 62053-22 (class 0.5S) |
Thermoplastic housing, backlit LCD, Modbus RTU RS485 output |
V / A / kW / kVAr / kWh / PF / Hz, 3-phase 4-wire, 400V |
Energy monitoring, sub-metering, SCADA data collection |
| Multifunction kWh Energy Meter (DIN rail) |
IEC 62053-21 (class 1), EN 62053-21, MID approved |
Thermoplastic, backlit LCD, pulse output, Modbus RTU |
5(63)A direct connection or CT input, single/three-phase |
Tenant sub-metering, energy management, billing systems |
