Vibration Control Solutions

Anti-Vibration Mounts & Isolators Supplier Saudi Arabia — Elastomeric Mounts, Spring Isolators, Inertia Bases & Flexible Connectors In Stock

Gulf Union Ozone supplies a comprehensive range of vibration isolation and control products for Saudi Arabia's industrial, oil and gas, HVAC, and infrastructure sectors. Our portfolio covers elastomeric anti-vibration mounts in natural rubber and neoprene — sandwich, bobbin, conical, and pad types — for loads from 10 kg to 2 000 kg per mount, with ISO 10846-tested dynamic stiffness and loss-factor data for structural vibration isolation design. Free-standing and housed steel spring isolators with static deflections from 25 to 150 mm provide low-frequency isolation for Saudi HVAC air-handling units, cooling towers, and chiller plants. Concrete-filled steel inertia bases add mass to centrifugal pump, fan, and compressor skids to improve isolator performance on light-steel Saudi plant structures. Rubber buffers, seismic restraints, and snubbers control lateral and uplift forces during seismic and shock events in compliance with IBC 2021 and ASCE 7. For piping systems, EPDM, neoprene, and Buna-N flexible pipe connectors in DN15–DN600 (to 16 bar, ANSI and PN flanges) absorb pump vibration and thermal expansion. Wire-rope isolators in marine-grade 316 stainless steel are available for high-temperature, H2S-exposure, or offshore environments where rubber elastomers degrade. Gulf Union Ozone cross-references OEM anti-vibration specifications from Grundfos, Sulzer, EBARA, and Howden and supplies direct-replacement mounts. ISO 9001:2015 certified. CR 4030570569. Stocked in Jeddah.

WhatsApp for Quote Submit RFQ

Anti-vibration mounts and spring isolators for Saudi Arabia pumps, fans and compressors — Gulf Union Ozone Jeddah

Anti-Vibration Product Categories

Product Types in Stock

Gulf Union Ozone supplies six anti-vibration and vibration isolation product families for Saudi Arabia industrial, oil and gas, HVAC, and marine applications — with ISO 10846 vibration test data, seismic restraint certification, and H2S-resistant options for sour-service environments.

Type 01

Elastomeric Anti-Vibration Mounts

Sandwich, bobbin, conical and pad mounts in natural rubber and neoprene; 10 kg to 2 000 kg load per mount; ISO 10846-tested insertion loss for Saudi pump, fan and compressor bases. Elastomeric mounts are the most widely used vibration isolation element in Saudi industrial plants — fitted beneath centrifugal pumps, diesel generators, air compressors, and HVAC equipment to reduce structure-borne noise and vibration transmission to building floors and steelwork. Gulf Union Ozone supplies a comprehensive range of mount geometries including flat sandwich mounts (bolt-through), stud-mounted bobbin isolators, conical mounts for combined axial and radial isolation, and anti-vibration cork/rubber and neoprene pads. All supplied with ISO 10846-2 dynamic stiffness data for structural insertion loss prediction.

Type 02

Spring Isolators

Free-standing and housed steel-coil spring isolators with levelling and corrosion-resistant finish; deflections 25–150 mm for low-frequency isolation of Saudi HVAC air-handling units and cooling towers. Spring isolators achieve much lower natural frequencies than elastomeric mounts — essential for isolating low-speed rotating equipment (400–1500 rpm) where rubber mount deflections would be insufficient. Free-standing open-spring isolators suit open-plan plant rooms; housed spring isolators provide seismic restraint and uplift control for high-seismic-zone installations. Gulf Union Ozone's spring isolators feature hot-dip galvanised or epoxy-coated spring elements for outdoor Saudi coastal environments, built-in levelling bolts, and neoprene base pads to isolate high-frequency structure-borne noise not attenuated by the spring alone.

Type 03

Inertia Bases

Concrete-filled steel inertia frames for centrifugal pumps, fans and compressors; add mass to reduce dynamic deflection and improve isolator efficiency on light-steel Saudi plant structures. Inertia bases increase the supported mass, which lowers the dynamic amplification ratio and reduces the vibration transmitted to the building structure under start-up transients and variable-speed operation. Gulf Union Ozone supplies welded structural steel base frames engineered to OEM pump or fan footprint, with in-fill ready for site concrete pouring. Standard frames include anchor bolt pockets for equipment bolting, conduit sleeves for cable routing, and levelling provisions. Sized and designed to customer pump/fan data; AISC structural steel standard. Suitable for Saudi process plant, desalination, and power station applications.

Type 04

Rubber Buffers

Cylindrical, square and bonded-bolt rubber buffers for restraining lateral movement during seismic and shock events; used on Saudi industrial machinery, generators and transformers. Rubber buffers act as snubbers — they allow free vibration isolation during normal operation but limit excessive equipment displacement under wind loads, seismic events, or short-circuit forces on generators and transformers. Gulf Union Ozone supplies cylindrical rubber buffers (compression type) for general lateral restraint, square rubber buffers with metal end plates for bolted installations, and bonded-metal-rubber buffers in compression and shear modes. Available in natural rubber (general service) and neoprene (oil-mist and ozone-resistant). Load ratings from 100 N to 100 kN; deflection to 30% strain at rated load.

Type 05

Flexible Pipe Connectors

EPDM, neoprene and Buna-N elastomeric pipe connectors that absorb pump vibration and thermal expansion; DN15–DN600, rated to 16 bar, ANSI and PN flanges, WRAS-approved potable water option. Flexible pipe connectors are installed on pump suction and discharge flanges to prevent vibration transmission from the pump into the pipework and to accommodate minor misalignment and thermal movement. Gulf Union Ozone supplies EPDM-lined connectors (best for chlorinated water and ozone service — ideal for Saudi desalination and HVAC chilled water systems), neoprene connectors (general service and oil-mist environments), and PTFE-lined stainless braid connectors for chemical and high-temperature service. Available with ANSI Class 150 and PN10/PN16 flanges; WRAS-approved EPDM connectors for potable water. DN25–DN600 from stock in Jeddah.

Type 06

Wire-Rope Isolators

All-metal stainless-steel wire-rope isolators for high-temperature or corrosive environments where rubber degrades; used on Saudi offshore platforms and petrochemical plants with H₂S exposure. Wire-rope isolators consist of loops of stainless-steel wire rope wound through aluminium alloy retaining bars — the wire-rope strands provide both the restoring (spring) force and the damping through inter-strand Coulomb friction. Because there is no rubber, they are unaffected by ozone, H2S, aromatic hydrocarbons, UV radiation, or temperatures up to 200°C — making them the preferred choice for Saudi offshore, petrochemical, and coastal industrial environments. Gulf Union Ozone stocks marine-grade 316 SS wire-rope isolators in horizontal, vertical, and 3D omnidirectional configurations; load range 5 kg to 500 kg per isolator. Natural frequency 8–25 Hz; inherent seismic snubbing with no separate restraint required.

Product Catalog

Complete Anti-Vibration Mounts & Isolators Range — 27+ Products

All elastomeric mounts supplied with ISO 10846-2 dynamic stiffness data. Seismic restraint products comply with IBC 2021 and ASCE 7. ISO 9001:2015 (CR 4030570569). Stocked in Jeddah; delivery across Saudi Arabia.

Product	Static Deflection	Load Range	Frequency Range	Application
Natural Rubber Sandwich Mount — Type A (Light)	3–5 mm	10–50 kg per mount	fn 14–22 Hz	Small pumps, fans, and generators — Saudi HVAC and utility plant
Natural Rubber Sandwich Mount — Type B (Medium)	5–8 mm	50–200 kg per mount	fn 11–14 Hz	Centrifugal pumps, compressors — Saudi water treatment and process plant
Natural Rubber Sandwich Mount — Type C (Heavy)	8–12 mm	200–500 kg per mount	fn 9–11 Hz	Heavy pumps, diesel generators, process compressors — Saudi oil & gas
Natural Rubber Sandwich Mount — Type D (Extra Heavy)	10–16 mm	500–2 000 kg per mount	fn 7–10 Hz	Large compressor trains, power generators — Saudi Aramco & SEC facilities
Conical Anti-Vibration Mount (Axial + Radial)	6–15 mm (axial)	50–500 kg per mount	fn 8–14 Hz	Combined axial and radial isolation — rotating machinery on Saudi platforms
Bobbin (Stud) Anti-Vibration Mount	4–10 mm	10–150 kg per mount	fn 10–16 Hz	Electrical panels, compressor skid feet, fan scroll isolators — Saudi plants
Anti-Vibration Pad — Cork/Rubber Composite	1–3 mm (typical)	Variable (load per cm²)	fn 18–30 Hz	Underlay for machinery base plates — Saudi industrial factories and workshops
Anti-Vibration Pad — Ribbed Neoprene	2–5 mm	Variable (load per cm²)	fn 14–22 Hz	Oil-resistant pad underlay — compressors, hydraulic power units, Saudi plants
Spring Isolator — Free-Standing Open Coil	25–75 mm	50–2 000 kg per unit	fn 3–6 Hz	AHU, cooling tower, chiller plant — Saudi HVAC and district cooling
Spring Isolator — Housed with Seismic Restraint	25–75 mm	100–3 000 kg per unit	fn 3–6 Hz	IBC 2021 / ASCE 7 seismic restraint — critical HVAC in Saudi hospitals and airports
Spring Isolator — Levelling Type with Neoprene Cap	50–150 mm	200–5 000 kg per unit	fn 2–4 Hz	Low-speed fans, cooling towers on roof structures — Saudi commercial buildings
Inertia Base — Welded Steel Frame (Unfilled)	N/A (adds load mass)	Custom to pump/fan footprint	Improves isolator efficiency	Centrifugal pump and fan skid base — Saudi process & desalination plants
Inertia Base — Concrete-Filled Steel Frame	N/A (adds load mass)	Custom to OEM footprint	Improves isolator efficiency 20–40%	Compressor, heavy pump, generator base — Saudi oil & gas plant structures
Rubber Buffer — Cylindrical Compression Type	To 30% strain at rated load	0.1–10 kN per buffer	Snubber / lateral restraint	Lateral restraint for isolated machinery — Saudi generators and compressors
Rubber Buffer — Square Bonded-Metal Type	To 25% compression	0.5–50 kN per buffer	Snubber / shock restraint	Transformer and reactor shock mounts — Saudi substations and power plants
Large Rubber Buffer — Seismic Restraint Type	To 20% strain	10–100 kN per buffer	IBC 2021 / ASCE 7	Seismic bump stops for AHU and chiller units in Saudi critical facilities
Wire-Rope Isolator — Horizontal (1D)	8–20 mm	5–100 kg per unit	fn 10–20 Hz	Electronic enclosures, control panels — Saudi petrochemical plant H2S zones
Wire-Rope Isolator — Vertical (1D)	10–25 mm	10–200 kg per unit	fn 8–18 Hz	Equipment on vibrating structures — Saudi offshore platforms and FPSO
Wire-Rope Isolator — 3D Omnidirectional	10–30 mm (all axes)	20–500 kg per unit	fn 8–15 Hz all axes	Multi-axis isolation with seismic snubbing — H2S / ozone / high-temperature service
Flexible Pipe Connector — EPDM DN25–DN100	±20 mm axial / ±15° angular	DN25–DN100 / 16 bar	Absorbs pump vibration	Chilled water, potable water, desalination pump connections — Saudi plants
Flexible Pipe Connector — EPDM DN150–DN600	±25 mm axial / ±10° angular	DN150–DN600 / 16 bar	Absorbs pump vibration	Large HVAC, cooling tower, and desalination pump suction/discharge connections
Flexible Pipe Connector — Neoprene (Oil-Resistant)	±20 mm axial	DN25–DN400 / 16 bar	Absorbs pump vibration	Oil-mist or lubricant-wetted environments — Saudi compressor and lube oil systems
Flexible Pipe Connector — PTFE-Lined SS Braid	±10 mm axial	DN15–DN300 / 25 bar	Absorbs vibration and thermal	Chemical service, hot water, and steam condensate — Saudi process plants
Seismic Restraint — Spring Snubber (Vertical)	Uplift restraint	To 5 000 kg per snubber	IBC 2021 / ASCE 7	Seismic uplift restraint for spring-mounted equipment — Saudi critical facilities
Generator Anti-Vibration Frame (Skid-Mounted)	Custom deflection	To 20 000 kg (generator set)	fn 5–10 Hz	Diesel and gas generator sets — Saudi hospitals, data centres, oil & gas camps
Pipe Hanger with Vibration Isolation	10–25 mm spring deflection	10–500 kg per hanger	fn 3–6 Hz	Structure-borne noise reduction in pipe hangers — Saudi hospital and hotel HVAC
Compressor Skid Anti-Vibration Mount Set	12–20 mm	500–5 000 kg total load	fn 7–10 Hz	Reciprocating and screw compressor skid isolation — Saudi oil & gas plants

Why Us

Why Saudi Arabia Plant Engineers Choose Gulf Union Ozone for Anti-Vibration Mounts & Isolators

📄

ISO 10846 Vibration Test Data

All elastomeric mounts supplied with dynamic stiffness and loss-factor data per ISO 10846-2 for vibration isolation prediction in Saudi plant structural analysis. Required for HVAC vibration compliance reports and machine foundation design for Saudi Aramco and Ministry of Municipal projects.

🏗

Seismic Restraint Compliance

Spring isolators and rubber mounts with integral seismic snubbers comply with IBC 2021 and ASCE 7 seismic restraint requirements adopted by Saudi building codes for critical industrial equipment. Compliance documentation provided for hospital, airport, and oil and gas project submissions.

⚠

H₂S-Resistant Options

Wire-rope isolators and Viton-based elastomeric mounts available for Saudi offshore and sour-service environments where rubber degradation from H2S or aromatic hydrocarbons is a risk. Marine-grade 316 SS wire-rope isolators in stock; Viton mounts to order with 4-week lead time.

🔧

OEM Specification Matching

Cross-references pump and fan OEM anti-vibration specifications (Grundfos, Sulzer, EBARA, Howden) and supplies direct-replacement mounts with equivalent static deflection and load rating. Saves Saudi plant engineers time in specification review and procurement approval.

Also Stocked at Gulf Union Ozone

Acoustic

Noise & Vibration Control

Acoustic enclosures, silencers, vibration damping sheets, and noise barriers for Saudi industrial machinery, compressor stations, and HVAC plant rooms — engineered to local noise limits.

Piping

Expansion Joints

Metallic bellows, fabric, and rubber expansion joints for thermal expansion, vibration absorption, and misalignment compensation in Saudi Arabia process and utility piping systems.

Rotating Equipment

Air Compressors

Reciprocating, screw, and centrifugal air compressors for Saudi Arabia industrial and oil & gas applications — complete with anti-vibration skid packages and flexible connector kits.

Fans

Industrial Fans & Blowers

Centrifugal and axial fans, blowers, and duct fans for Saudi HVAC, process ventilation, and combustion air supply — supplied with anti-vibration mounts and flexible duct connectors.

Frequently Asked Questions

Anti-Vibration Mounts & Isolators in Saudi Arabia — Common Questions

How is the natural frequency of an anti-vibration mount calculated?

The natural frequency (fn) of an isolator is calculated from its static deflection (δ) under the supported load: fn = 1/(2π) × √(g/δ), where g = 9.81 m/s². For effective isolation (above 80% vibration reduction), the excitation frequency must be at least 1.41× the mount natural frequency (ideally 3–5× for above 90% isolation). A centrifugal pump running at 1500 rpm (25 Hz excitation) requires a mount with fn ≤ 8 Hz, achieved with a static deflection of at least 16 mm. Gulf Union Ozone's engineering team calculates mount selection from equipment weight, centre of gravity and speed.

What type of flexible pipe connector suits a Saudi desalination pump?

For Saudi desalination service (seawater or brackish water at up to 50°C and 16 bar), EPDM-lined flexible connectors with stainless-steel braid reinforcement are recommended. EPDM has excellent resistance to chlorinated water and ozone; the stainless braid handles pressure thrust and provides mechanical protection. For hot-water or steam-condensate lines, EPDM or PTFE-lined stainless braid connectors are used. Gulf Union Ozone supplies WRAS-approved EPDM flexible connectors in DN25–DN600 with ANSI 150# and PN10/PN16 flanges from stock in Jeddah.

When should wire-rope isolators be specified instead of rubber mounts for Saudi plants?

Wire-rope isolators are preferred over rubber mounts in three scenarios: (1) high-temperature environments above 70°C where rubber creeps or degrades; (2) chemically aggressive environments with H2S, aromatic solvents or ozone that attack elastomers (common in Saudi oil and gas); (3) installations requiring multi-directional isolation (horizontal + vertical + rocking) without separate restraints. Wire-rope isolators provide omnidirectional isolation with inherent snubbing, all-metal construction (no rubber to age) and are salt-spray resistant for Saudi offshore and coastal applications. Gulf Union Ozone stocks marine-grade 316 stainless-steel wire-rope isolators from 5 kg to 500 kg capacity.

Get a Quote

Request an Anti-Vibration Mounts & Isolators Quotation

To get a fast quotation, provide: equipment type (pump / fan / compressor / generator), equipment weight and number of mount points, operating speed (rpm), required static deflection or natural frequency target, environmental conditions (temperature, chemical exposure, seismic zone), and delivery location in Saudi Arabia.

WhatsApp — Vibration Isolation Quote Email Inquiry Submit RFQ Form

Recent Deliveries

• Anti-vibration mount package for centrifugal pump skids — SWCC Jeddah desalination plant, March 2026
• Spring isolators for HVAC units — King Abdulaziz International Airport expansion, January 2026
• Inertia bases for compressor train — Saudi Aramco Berri gas plant, November 2025

CR 4030570569 | ISO 9001:2015 | Jeddah, Saudi Arabia — Saudi Aramco vendor compliance · SAEP-347 credentials

Technical content reviewed by Gulf Union Ozone's Engineering Team, Jeddah — 2026