How should bilingual Arabic/English safety signs be specified for Saudi Arabia SASO compliance?

Saudi Arabia's SASO (Standards, Metrology and Quality Organization) and the General Directorate of Civil Defense (GDCD) require safety signs at industrial and commercial facilities to be bilingual in both Arabic and English. The requirements align with ISO 7010 pictograms combined with bilingual text panels beneath. Key specification points: (1) Pictogram standard — ISO 7010 graphical symbols are universally understood regardless of language and satisfy SASO; mandatory signs (blue circle), prohibition signs (red circle/bar), warning signs (yellow triangle), fire equipment (red square), and emergency/first-aid (green square); (2) Text — Arabic text is displayed right-to-left above or below the ISO 7010 pictogram; English text appears on the same sign below; Noto Sans Arabic or equivalent legible font at minimum 4mm character height for the viewing distance; (3) Material — 1mm rigid PVC for interior dry locations; 1.5mm aluminium for outdoor or high-humidity areas; photoluminescent material for emergency routes; (4) Sizing — minimum sign height to ISO 7010 Annex A based on safe viewing distance: 100×100mm for <5m, 200×200mm for 5–20m, 400×400mm for 20–50m; (5) Fixings — self-adhesive vinyl backing for flat surfaces; screw-mount holes for wall-fixed signs. Gulf Union Ozone supplies bilingual Arabic/English ISO 7010 signs in rigid PVC, aluminium, and stainless steel in all standard sizes from our Jeddah warehouse for next-day delivery across Saudi Arabia.

What photoluminescent emergency exit sign standards apply to Saudi Arabia industrial buildings?

Photoluminescent (glow-in-the-dark) emergency exit signs for Saudi Arabia industrial buildings are specified to ISO 7010 and ISO 15370 (long-afterglow photoluminescent safety signs). The applicable standards are: (1) ISO 7010 sign designations — emergency exit direction signs E001 (running man with arrow variants E002–E009 for left, right, straight directions), assembly point E007, first-aid E003; fire equipment location signs F001 (fire extinguisher), F002 (fire hose reel) in photoluminescent format; (2) Material performance — ISO 15370 specifies afterglow duration and brightness; DIN 67510 Part 4 requires minimum luminance of 0.3 mcd/m² after 10 hours in darkness following 60 minutes of ambient light charging; BS 5499-4 and PSPA Class B or Class C grading are additional benchmarks used by UK and European specification in KSA oil and gas; (3) Application — Saudi Civil Defense and Saudi Aramco facility standards (SAES) require emergency exit signs to remain visible for minimum 60 minutes following power failure — achievable with DIN 67510 Class B photoluminescent material without battery backup; (4) Placement — maximum 20m spacing between directional signs on escape routes per NFPA 101; sign bottom edge at 0.2m above floor for smoke-level visibility. Gulf Union Ozone stocks ISO 7010 / ISO 15370 photoluminescent emergency exit and fire equipment signs (E001–E023, F001–F018) in rigid PVC and aluminium substrates with long-afterglow coating from our Jeddah warehouse.

What are the ANSI A13.1 pipe marker colours for oil and gas process pipework in KSA?

ANSI/ASME A13.1 is the North American standard for pipe marker identification widely adopted in Saudi Arabia's oil and gas, petrochemical, and process plant facilities. The colour coding system identifies the contents of pipes to enable safe operation and emergency response. Key ANSI A13.1 colour categories used in KSA oil and gas facilities: (1) Yellow background with black text — flammable fluids (hydrocarbons: crude oil, LPG, natural gas, naphtha, fuel gas, diesel); (2) Orange background with black text — toxic and corrosive fluids (acids, caustics, chemical streams); (3) Brown background with white text — combustible fluids above their flash point; (4) Green background with white text — water (potable, cooling, fire, raw, treated); (5) Blue background with white text — compressed air and other gases (instrument air, nitrogen, plant air); (6) Red background with white text — fire protection systems (fire water, foam); (7) Purple/violet background with white text — reclaimed water and effluent. Pipe markers are installed in vinyl self-adhesive format at every valve, fitting, branch, and minimum every 15m on straight runs per A13.1. Pipe flow direction arrows in the same colour scheme. Gulf Union Ozone stocks ANSI A13.1 pipe marker kits in self-adhesive vinyl for all services — including custom printing for specific process fluid names and hazard ratings — delivered across Saudi Arabia from our Jeddah warehouse.

Safety Signs & Labels Saudi Arabia

Safety Signs & Labels Categories

Product Types in Stock

Gulf Union Ozone carries six core categories of safety signs, labels, and site identification products for construction, oil and gas, petrochemical, and industrial sites across Saudi Arabia. All signs supplied with compliance documentation referencing the applicable ISO, ANSI, SASO, or GHS standard.

Type 01

ISO 7010 Safety Signs

Complete range of ISO 7010 graphical safety signs for industrial facilities, construction sites, and commercial buildings across Saudi Arabia. Mandatory signs (blue circle, white pictogram) — M001 through M058 covering PPE requirements, eye wash, fire door, no entry without authorisation, and all mandatory action instructions. Warning signs (yellow triangle, black pictogram) — W001 through W072 covering electricity, fire, explosion, toxic, radiation, fall hazard, and machinery hazards. Prohibition signs (red circle and diagonal bar) — P001 through P065 covering no smoking, no naked flame, no entry, no water, and prohibited actions. Fire equipment signs (red background, white pictogram) — F001 through F018 for fire extinguishers, fire hose reels, fire break glass, fire doors, and fire assembly points. First aid and emergency signs (green background, white pictogram) — E001 through E023 for emergency exits, eyewash stations, first aid points, and emergency showers. All signs available in 1mm rigid PVC, 1.5mm aluminium, and 2mm stainless steel. Sizes: 100×100mm, 200×200mm, 300×300mm, 400×400mm, and 600×600mm. Bilingual Arabic/English versions stocked for SASO and Saudi Civil Defense compliance.

Type 02

Warning & Hazard Signs

ANSI Z535 standardised hazard communication signs for construction and industrial sites in Saudi Arabia. Danger signs (red header, black and white lower panel) for conditions that will cause death or serious injury if the hazard is not avoided — high voltage, confined space entry, fall hazard, toxic material. Warning signs (orange header) for conditions that could cause death or serious injury. Caution signs (yellow header) for conditions that may cause minor or moderate injury. Notice signs (blue header) for site rules, access control, and procedural instructions. High-voltage electrical hazard signs complying with NFPA 70E and Saudi Electricity Company (SEC) requirements. Confined space entry signs with OSHA 29 CFR 1910.146 permit-required confined space pictogram. Permit-to-work (PTW) zone signs for hot work, cold work, and electrical isolation areas — formats approved for use on Saudi Aramco, SABIC, and EPC project sites. GHS (Globally Harmonised System) chemical hazard pictogram labels in self-adhesive vinyl for labelling chemical storage cabinets, chemical drums, and secondary containers — flammable (flame symbol), corrosive (corroding hand), toxic (skull), explosive, environmental hazard, health hazard (exclamation), and compressed gas pictograms. SDSF-compliant chemical storage area danger signs for KSA SASO chemical safety requirements.

Type 03

Pipe Markers & Identification

ANSI/ASME A13.1 pipe markers in self-adhesive vinyl for identification of process, utility, fire protection, and HVAC pipework at Saudi Arabia oil and gas, petrochemical, water treatment, and industrial facilities. Colour-coded to ANSI A13.1: green (water — potable, cooling, fire, demineralised), yellow (flammable — hydrocarbons, LPG, natural gas, fuel oil), orange (toxic and corrosive — acids, chlorine, chemical process streams), brown (combustible fluids), blue (compressed air, nitrogen, instrument gas), red (fire protection — firewater mains, foam), purple (effluent and reclaimed water). Markers include flow direction arrows, fluid name legends, and hazard pictograms. Vinyl self-adhesive markers for insulated and bare pipe (100mm to 400mm OD sizes). Snap-on plastic markers for insulated pipes where adhesive cannot be used. Coil-lock wrap-around markers for small-bore pipes (DN15–DN50). Valve tags in stainless steel (engraved) and anodised aluminium with tag numbers for P&ID valve identification. Arrow tape (self-adhesive vinyl, 50mm wide) for flow direction on painted pipework. Custom legends available for specific process streams and KSA client naming conventions.

Type 04

Photoluminescent Emergency Signs

ISO 7010 emergency exit and fire equipment safety signs in long-afterglow photoluminescent material to ISO 15370 and DIN 67510 for no-power emergency egress in Saudi Arabia industrial buildings, hotels, hospitals, and commercial facilities. Photoluminescent signs charge from ambient light (daylight or artificial) and glow in darkness for a minimum of 60–120 minutes — satisfying Saudi Civil Defense requirements for emergency lighting independence from building power. Afterglow performance to DIN 67510 Class B: minimum 0.3 mcd/m² luminance after 10 hours in darkness. Emergency exit signs: E001 (emergency exit running man), E002–E009 directional arrow variants, E018 (emergency shower), E023 (emergency assembly point). Fire equipment signs: F001 (fire extinguisher), F002 (fire hose reel), F003 (fire ladder), F006 (fire break glass). All signs on 1mm rigid PVC substrate with photoluminescent coating; aluminium-backed options for durability in harsh environments. Available in standard ISO sizes 100×100mm through 600×200mm elongated format. Direction arrows and combined text/symbol signs for emergency escape route marking at floor and ceiling level.

Type 05

Barricade Tape & Floor Marking

Site barricade and floor marking products for hazard demarcation, traffic management, and safety zone identification across Saudi Arabia construction, industrial, and process plant sites. Barricade tape in red/white (danger — do not enter) and yellow/black (caution — hazard area) in 75mm and 100mm widths, 250m and 500m roll lengths — non-adhesive for temporary barricade rope application on stakes and posts. Floor marking tape (self-adhesive vinyl, 50mm wide, 25m rolls) in yellow (pedestrian walkways and forklift lanes), red (fire equipment and emergency routes), blue (mandatory PPE zones), and green (safe routes and first-aid areas) for factory floor, warehouse, and plant-room safety lane marking. Safety cones (300mm, 450mm, and 750mm height) in orange PVC with reflective bands for road and site traffic management. Safety barriers — interlocking plastic modular barrier systems for crowd control and hazard zone perimeters. Danger zone rope (red and white twisted) in 6mm and 8mm polypropylene for stanchion-based barricade systems. Anti-fatigue matting for workstations. All floor tape and barricade products sourced for Saudi Arabia climate — UV-stable for outdoor desert sun exposure.

Type 06

Equipment Tags & Lockout/Tagout

Lockout/tagout (LOTO) equipment and safety tagging products for energy isolation procedures at Saudi Arabia industrial and process plant sites — complying with OSHA 29 CFR 1910.147 control of hazardous energy and Saudi Aramco SAES-A-005 permit-to-work requirements. LOTO padlocks in safety red with individually keyed cylinders — one key per lock for personal protection. Multi-lock hasp sets (25mm and 38mm shackle) for multiple-person lockout on shared isolation points — up to 6 padlocks per hasp. Lockout station (wall-mounted board) with shadow board storage for padlocks, hasps, tags, and LOTO devices for valve lockout (ball valve and gate valve lockout devices), electrical lockout (MCB and fuse pull-out lockout), and pneumatic and hydraulic energy isolation. Danger tags (red, 100×150mm) and out-of-service tags in laminated card with tie-wire — pre-printed "DANGER — DO NOT OPERATE" in bilingual English/Arabic for Saudi Arabia site use. Permit-to-work (PTW) tags for hot work, cold work, confined space, and electrical work permits — colour-coded as required by site PTW procedures. Fire extinguisher monthly inspection tags. Equipment calibration tags (green) and out-of-calibration tags (red) for instrument loop tagging. All LOTO products compatible with Saudi Aramco, SABIC, and major EPC contractor site procedures.

Product Catalog

Complete Safety Signs & Labels Range — 26+ Products

All safety signs and labels supplied with standard references, declaration of conformity where applicable, and material data sheets. ISO 9001:2015 QMS (CR 4030570569). Bilingual Arabic/English versions available for all mandatory signs. Representative stock lines — contact us for custom legends, sizes, and quantities.

Product	Standard	Material / Construction	Size	Application
Safety Helmet Mandatory Sign — M014 (Bilingual)	ISO 7010 M014; SASO	1mm rigid PVC; white pictogram on blue; Arabic/English text	200×200mm / 300×300mm	Site entry mandatory helmet point — KSA construction and oil & gas sites
Eye Protection Mandatory Sign — M004 (Bilingual)	ISO 7010 M004; SASO	1mm rigid PVC; white on blue; Arabic/English	200×200mm / 300×300mm	Eye protection zone entry sign — grinding, welding, chemical handling areas
Safety Footwear Mandatory Sign — M008 (Bilingual)	ISO 7010 M008; SASO	1mm rigid PVC; white on blue; Arabic/English	200×200mm / 300×300mm	Mandatory safety boot zone at construction, fabrication, and plant entry
No Entry Prohibition Sign — P006 (Bilingual)	ISO 7010 P006; SASO	1mm rigid PVC; black on white with red ring/bar; Arabic/English	200×200mm / 300×300mm / 400×400mm	Restricted access zones, controlled areas, permit-required areas — KSA sites
No Smoking Prohibition Sign — P002 (Bilingual)	ISO 7010 P002; SASO	1.5mm aluminium; UV-stable print; Arabic/English	200×200mm / 300×300mm / 400×400mm	Flammable areas, fuel storage, process plant — outdoor KSA facility use
High Voltage Warning Sign — W012 (Bilingual)	ISO 7010 W012; ANSI Z535.2; IEC 60417	1.5mm aluminium; black lightning bolt on yellow triangle	200×200mm / 300×300mm / 400×400mm	Switchgear, MCC, substation, and HV cable route warning — KSA electrical
Flammable Material Warning Sign — W021 (Bilingual)	ISO 7010 W021; GHS; SASO	1mm rigid PVC; flame pictogram on yellow triangle; Arabic/English	200×200mm / 300×300mm	Flammable chemical storage, hydrocarbon handling areas, fuel depots — KSA
Corrosive Substance Warning Sign — W023 (Bilingual)	ISO 7010 W023; GHS corrosive	1mm rigid PVC; corrosion pictogram on yellow; Arabic/English	200×200mm / 300×300mm	Acid storage, chemical dosing areas, water treatment chemical handling
GHS Flammable Pictogram Label — Self-Adhesive	GHS (UN); OSHA HazCom 2012; SASO	Vinyl self-adhesive; flame GHS01; UV and chemical resistant	50×50mm / 100×100mm / 150×150mm	Chemical drum, IBC, and container secondary labelling — KSA GHS compliance
GHS Corrosive Pictogram Label — Self-Adhesive	GHS (UN); OSHA HazCom 2012; SASO	Vinyl self-adhesive; corroding hand/test tube GHS05	50×50mm / 100×100mm	Acid and caustic chemical containers, storage cabinet labelling — KSA plants
GHS Toxic Skull Pictogram Label — Self-Adhesive	GHS (UN); OSHA HazCom 2012; SASO	Vinyl self-adhesive; skull and crossbones GHS06	50×50mm / 100×100mm	H2S, toxic gas, and lethal-dose chemical container labelling — KSA safety
ANSI Z535 Danger Sign — Red Header	ANSI Z535.2; OSHA HCS	1mm rigid PVC; red header, black/white lower; custom legend	300×450mm / 450×600mm landscape	Conditions causing death or serious injury — high voltage, confined space
ANSI Z535 Caution Sign — Yellow Header	ANSI Z535.2	1mm rigid PVC; yellow header, black text; custom legend	300×450mm / 450×600mm	Minor injury hazard warning — slippery floor, hot surface, low clearance
Pipe Marker — Cold Water (Green) Self-Adhesive Vinyl	ANSI/ASME A13.1; BS 1710	Self-adhesive vinyl; green background, white text and arrow	OD range 25–150mm markers; 200mm wide	Potable water, cooling water, and fire water pipe identification — KSA plants
Pipe Marker — Gas/Oil Service (Yellow) Self-Adhesive Vinyl	ANSI/ASME A13.1; BS 1710	Self-adhesive vinyl; yellow background, black text and arrow	OD range 25–400mm; 200mm and 300mm wide	Flammable hydrocarbons — LPG, crude, fuel gas, diesel lines — KSA oil & gas
Pipe Marker — Fire Protection (Red) Self-Adhesive Vinyl	ANSI/ASME A13.1; NFPA 24	Self-adhesive vinyl; red background, white text and arrow	OD range 25–300mm; 200mm wide	Fire water mains, sprinkler supply, and foam system lines — KSA facilities
Pipe Marker — Hazardous (Orange) Self-Adhesive Vinyl	ANSI/ASME A13.1	Self-adhesive vinyl; orange background, black text and arrow	OD range 25–300mm	Toxic and corrosive chemical process lines — acids, caustics, chlorine — KSA
Valve Tag — Stainless Steel Engraved	ANSI/ASME A13.1; P&ID tag numbering	SS 304 plate 1mm; laser-engraved alphanumeric; wire hole	50×25mm / 75×50mm; tie wire supplied	Valve identification per P&ID at KSA process plant and pipeline valve stations
Photoluminescent Emergency Exit Sign — E001 Running Man	ISO 7010 E001; ISO 15370; DIN 67510 Class B	1mm PVC substrate; long-afterglow coating; glow ≥60 min	200×200mm / 300×100mm / 300×150mm	Emergency exit identification in no-power conditions — KSA industrial buildings
Photoluminescent Fire Hose Reel Sign — F002	ISO 7010 F002; ISO 15370; DIN 67510	1mm PVC; photoluminescent with red background section	200×200mm / 300×300mm	Fire hose reel location marking visible in smoke and power failure — KSA
Photoluminescent Fire Extinguisher Sign — F001	ISO 7010 F001; ISO 15370; DIN 67510	1mm PVC; photoluminescent; red section with white extinguisher	200×200mm / 300×300mm	Fire extinguisher location visible during power failure — KSA facility compliance
Barricade Tape — Red/White Hazard 75mm×250m	ANSI Z535; non-adhesive warning tape	LDPE film; red/white alternating; UV-resistant print	75mm wide × 250m roll	Danger zone barricade — do not cross; temporary hazard demarcation — KSA sites
Floor Marking Tape — Yellow Self-Adhesive 50mm×33m	OSHA 29 CFR 1910.22; ANSI Z535.2	0.15mm vinyl; acrylic adhesive; anti-skid texture; forklift-rated	50mm wide × 33m roll; yellow, red, blue, green options	Factory floor lane marking, pedestrian walkway, and safety zone demarcation
LOTO Padlock — Safety Red Individually Keyed	OSHA 29 CFR 1910.147; ANSI Z244.1	Zinc die-cast body; 25mm hardened steel shackle; red nylon cover	25mm shackle; individually keyed (1 key per lock)	Personal energy isolation lockout — one lock per worker on isolations — KSA LOTO
Multi-Lock Hasp Set — 25mm Shackle 6-Point	OSHA 29 CFR 1910.147; ANSI Z244.1	Steel hasp; 25mm shackle diameter; accommodates 6 padlocks	6 lock holes × 25mm; orange or red steel body	Group lockout for shared isolation points — multi-craft PTW procedures — KSA
Danger Out-of-Service Tag — Bilingual Arabic/English	OSHA 29 CFR 1910.147; ANSI Z535.5	Laminated card 100×150mm; red header; nylon tie; pre-printed	100×150mm; pack of 100	Equipment and valve isolation tagging — Do Not Operate — KSA LOTO procedures
Fire Extinguisher Inspection Tag	NFPA 10; Saudi Civil Defense requirement	Rigid PVC card; monthly inspection punch grid; cable tie mount	75×150mm; pack of 50 tags	Monthly fire extinguisher inspection recording — KSA Civil Defense compliance

Safety Signs & Labels Supplier Saudi Arabia — ISO 7010, NFPA & Pipe Markers In Stock

Product Types in Stock

ISO 7010 Safety Signs

Warning & Hazard Signs

Pipe Markers & Identification

Photoluminescent Emergency Signs

Barricade Tape & Floor Marking

Equipment Tags & Lockout/Tagout

Complete Safety Signs & Labels Range — 26+ Products

Why HSE Teams in Saudi Arabia Choose Gulf Union Ozone for Safety Signs

Local Stock — Same-Day Dispatch

Bilingual & SASO Compliant

ISO 9001:2015 Certified Quality

Nationwide KSA Delivery

Also Stocked at Gulf Union Ozone

Site Safety PPE

Fire Fighting Equipment

Fire & Gas Detection

Industrial Chemicals

Request a Safety Signs & Labels Quotation